Constructor:Creating new pieces
There are several ways to create new pieces in a model:
1) Export of pieces from “Designer” program
2) Input of pieces through a digitizer (Digitizing)
3) Copying (and opening) of pieces from other models
4) Conversion of pieces from the formats of other systems (Gerber, Assyst, etc.)
5) Creation of pieces within a model: copying, standard pieces, etc.
6) Creation of pieces with the help of macrocommandsExport of pieces from “Designer” program
Contents
- 1 Export of pieces from “Designer” program
- 2 Input of pieces though a digitizer (Digitizing)
- 3 Copy pieces from other models
- 4 Conversion of pieces from the formats of other systems
- 5 Creation of new pieces inside a model
- 6 Construction of pieces with the help of macrocommands
Export of pieces from “Designer” program
To export pieces from “Designer” program for creation of base constructions:
- Create a new model or open a previously created model in the window “Work with the database” (
- “Object/ Work with the database”).
- Select PIECES tab in the horizontal menu and the button in it
or follow the text menu points “Piece/Do the project”. The window for selection of a project is displayed on the screen.

- Select the project for exporting in “Projects” window with highlighting the line of a necessary construction

- Select the pieces of the project in “Pieces” window with clicking the cell before the name of the piece, to mark it with a check mark
. Another click in the cell removes selection.
- selection of all the pieces in the list,
- cancel selection of pieces,
- cancel colored selections (errors)
Open the table with “Reference data” of the construction with selection of the button
and make necessary changes in the tabs “Measurement data”, “Increases and constant values”, “Variables”:

Measurement data – values of measurement of a figure, used for construction;
Increases and constant values– increases and constant values for the project;
Variable values – values received by means of calculations (formulas);
- To confirm new data, press the YES button, to cancel changes press the CANCEL button
- Select piece sizes with marking of all sizes/heights with the help of the top switch
, or by means of selection of necessary sizes with a click in the corresponding cells of the table:
The button
allows to clear the table and cancel selection of sizes
- For constant values of the table input manually and not received from the “Size database” (increases etc.) the windows with the “List of missing pieces” for all but basic size are displayed on the screen.

By means of inputting new values (instead of available ones) for each size, you can receive a gradable value (for example, length of the garment input in the table as a constant value). Even if no changes were made, it is compulsory to confirm values for a current size.
When the option is switched off
the window “List of missing data” is not displayed (if it is not necessary to change the table data by size).
- The pieces of selected sizes will be displayed on the screen of “Constructor” program.
FEATURES 1) The pieces are exported as untitled and must be assigned names (the function
”Pieces/ Piece parameters”) in “Constructor” program.
It is not compulsory for the name to match the one in “Designer” program, since an internal number of this piece is used in the program. You can have pieces with the same name from different projects in one model in “Designer” program.
2) The window “Piece parameters” shows the project name and the piece name.

When switching on the parameter
in the export window, such link with the base is lost.
Such pieces are marked with the letter D in the corresponding line of the window “Work with the database”. When a piece is deleted in “Designer” program, this indicator is switched off. When a piece is copied or opened on the screen from a different model, the marking D remains, and when pieces are copied inside a model, it is switched off.
3) The size scale of the working model must match the “Size database” of the project. Correspondence of basic sizes is not compulsory.
The range of sizes in the working model of “Constructor” program should be the same, or less than the range of sizes in the “Size database” of the project in “Designer” program. Otherwise, the following message will be displayed on the screen:

At the same time only one size, not the whole graded piece, will be exported.
This message will also be displayed if the size scales of the project made in “Designer” program and the working model do not match. For example, when a project of standard sizes (Industry Standard, State Standard Specification) is exported to a model with the European scale (34,36,38…). In this case, you need to Set the table for “Size compliance”.
Set the table for «Size compliance»
- Press the ОК button in the message and select the button for size selection
on the top panel of the export window. The table for size compliance is displayed on the screen.
For example, a project with the database of sizes 84 – 120 and heights 158 – 170 must be input in a model with the size range 36 – 48. Select height 164 for export.
- Specify the line with a necessary size/height in “Old sizes” column (it is highlighted), and then select a corresponding cell in the size table of the working model, filling in “New sizes” column. Upon wrong selection of the line, click it again to deselect.

When selection is finished, press the YES button. Switch to the export window is done.
Further operations are similar to those when the size scales of the model and the project comply.
The table commands:
- clear the table;
and
- save and read data from file.
FEATURES
1) When exporting pieces from the project containing widths to the project without it and complete match of sizes, you need to use a working width from the “Reference data” table of the project in “Designer” program.
2) When pieces are exported from the project containing widths to the project containing widths, corresponding widths are exported (regardless of the working width in “Designer” program).
3) If the size ranges are different, you need to select an export width in the Compliance table and select TO WHICH WIDTH of the model it should be changed, with opening of the size tab on the right side in the export window. In this case, it does not matter, which working width is opened on the screen in “Designer” program.

4) “Rewrite” option in the export window allows to export pieces size by size

ATTENTION!!! When ONE size is exported to the screen of “Constructor” program, a working size of “Designer” program is displayed on the screen of “Constructor”. That is why it is important to conform the basic size of the “Constructor” model in and the working size of the “Designer” project (in “Reference data” table
of the export window).

5) When the pieces are input repeatedly from “Designer” program with change in reference data (Measurement data, increases) previously input pieces are automatically reconstructed according to the new data.
6) The pieces are transferred to “Constructor” with constructed seams and modifications (ledge, cuff), if they were created in “Designer”, but only upon the first export. If you modify the seams in “Designer”, the information about the seams made in “Constructor” will be used upon repeated export.
Input of pieces though a digitizer (Digitizing)
Piece digitizing (archiving) is input of pieces in the system through a digitizer. Graphic information about the pieces is transferred with the help of a digitizer to “Constructor” program.
The following tasks can be performed with the help of piece digitizing:
- Digitizing of a separate piece and gradation by means of input of sizes as separate pieces
- Digitizing of an even gradation with equal increments
- Digitizing of an uneven gradation with ranges (leaps) of increments
- Digitizing of an uneven gradation
This description section for digitizing process addresses the following tasks:
2) General order of digitizing
3) Digitizing of a big piece in parts
FEATURES OF DIGITIZING 1) Functional points are not created during digitizing.
2) To select a necessary main contour during digitizing by default, you need to set the contour in the setting “Main contour by default” (text menu points “Settings/ Program parameters”, GENERAL/ Constructor tab)

ATTENTION! On selection of the “Cut” option, two contours are automatically created: the main contour – Working contour, and the derivative the Cut contour copying it, which will be drawn in the layouts.
3) Digitizing of graded piece is only performed by sizes. You can set height increments for pieces in the Increment table (
- “Window/ Show increment table”).
4) Special mode - Autonomous digitizer:
When the digitizing program is launched in a special mode, the buttons “Model” and “Piece” appear on the lower panel of the window for piece archiving. These buttons correspond to the tabs of the window “Work with the database” of “Constructor” program. This way the program for autonomous piece archiving has access to the window “Work with the database” of “Constructor” program, without a right to edit pieces on the screen.
It allows to conduct the digitizing process (and perform a full scale of work with the database of models and pieces) and transfer pieces to “Marker” program, without using “Constructor” program.
Preparation for digitization
To start digitization (archiving) of a piece:
- Switch on the digitizer
- Create a new model or load a previously created model in the window “Work with the database” (
- “Object/ Work with the database”) to input digitized pieces in the model.
You can also follow the text menu points “Piece/ Input from digitizer”.
The window with the parameters of an archived piece is displayed on the screen
- Fill in the piece parameters: Material, Name, Number of cut pieces
Specify the size and the height of the piece, and specify the type of the main contour being input: Cut or Ready view.
If necessary, change the other piece parameters in this window.
- To confirm data, press the YES button, to cancel input of data, press CANCEL button
The working window for piece archiving is displayed on the screen. The image on the screen reflects the process performed on the digitizer. The current working mode is displayed on the top panel of the window: digitization stage at the current moment. The button panel for digitization operations is displayed in the lower left corner; it corresponds with the template panel of the digitizer commands. When an optical cursor (a special mouse) is moved on the digitizer surface, the cursor cross is moved on the screen.
The button panel commands:
Clear – Clear the digitizer field upon wrong input of a piece.
Close contour – Close the piece contour for exact splicing of the last and the starting input points (to avoid trying to match the starting point when the input of the contour is finished).
Cancel the last point - Delete the last point (or points) input by mistake.
Save – Save a digitized piece in the end of the process.
Continue input – Mode for inputting of the second part of the piece when a piece is digitized in parts.
Input of point marker – Inputting inner contour as a point.
Input of the internal contour – Input of an internal contour for making marks and working lines.
Input by graded piece – Input of points with uneven gradation size by size
Exit – Exit from the archiving window when the process is finished.
The commands from the button panel of the digitizer are set in one of the following ways:
a) Set the optical cursor in the line of a necessary command of the template digitizer menu on the digitizer and click one of the cursor buttons.
b) Select the necessary line of the button archiving menu on the monitor screen with the help of the mouse.
The piece points on the digitizer are read with pressing a corresponding cursor button:
Button 1 - Intermediate points creating shape, which only affect shaping of a curve. Their visibility in the program is switched off;
Double click– Dart of an intermediate type (visible on the screen)
Button 2 – Control (grading) intermediate points;
Double click – dart of a corresponding type
Button 3 - End points (grading points of the contour bend)
Double click – dart of a corresponding type
Button 5 - grain line, and an increment by grading points is read
The digitizers working with “Constructor” automated working place can have different types of cursors, so the buttons can be set under the numbers, different from those indicated in the current description.
General order of digitizing
1. Digitizing always begins with drafting the grain line with the help of the button of the digitizer cursor:
- Move the cursor to the end point of the grain line and click the same button. The grain line is visible on the screen in red color and the working mode “Input of piece” is displayed at the top of the window:
2. Input the outer (main) contour of the piece. Input of the contour begins with the button 3
of the end point (the beginning point of the first piece section) and the contour is outlined clockwise.
3. The other points of the outer contour are set in turn, with no return back and double selection of the same point. The digitized sections appear on the screen as they are input from the digitizer. If a point is input by mistake, it can be canceled with the command “Delete the last point”. To input a dart (red squares) double click the button of a corresponding point type.
- To input a straight section, click the button 3-
in the beginning and the end of the section.
- To input a curved section, first set the end point, which determines the section start (button 3-
), then input intermediate points with the buttons 1-
or 2-
: shaping points or control intermediate points. The smoother is the change in the section curve, the less intermediate points are input. The end point (button 3) must be set again at the end of the section.
4. The contour line is finished with the command “Close the contour” on the button panel. That is why the last point of the contour outline (prior to the closing operation) must be specified not far from the starting point of digitization, instead of trying to get to the contour beginning.
5. The mode “Input of an internal point” is displayed in the top line of the archiving window: the contour of the inscription point on the piece. To set this point, move the digitizer cursor to a necessary place on the piece and click with any cursor button. A red point will be displayed on the screen.
This is a minimum set of operations necessary to archive a piece.
6. To save the piece, select the command “Save” on the button panel.
The archiving window is closed, and the window with the piece parameters remains on the screen. To end the process, press CANCEL button and open the piece on the screen from the window “Work with the database”.
Input of inner contours
If a piece has any internal markings, after the described operations (points 1-5) but before saving, do the following:
- Select the command “Input of an inner contour” or “Input of a point marking” on the button panel.
- Input a necessary contour using the same commands and methods as for the main contour.
Point marking (blue color) is an inner contour in the form of a point inside the piece contour.
After selection of the command “Input of a point marking” on the button panel, specify the point inside the piece with any button of the digitizer cursor.
Inner contour (green color) is an inner contour in the form of the lines inside the piece contour. If there are several markings on the piece, it is better to input them as separate contours: Specify the command “Input of an inner contour” on the button panel and input the first marking (for example, of a pocket), then select this command on the panel again and input the following marking (for example, of a dart)
3. Save the digitized piece with selection of the panel button “Save”.
Digitizing of a large piece in parts
When archiving a piece which does not fit the digitizer table, digitization must be performed in the mode “Continue input”. To do so:
- Digitize the first part of the piece fitting the digitizer, without performing the command “Close contour”: input a grain line and an outer contour of the piece (from point 1 to point 2).If necessary, digitize the inner contours without performing the commands “Close contour” and “Input of an inner point” (inscription):
- Move the piece, fitting its second part on the digitizer table (maintaining position of the grain line) and select the command “Continue input” on the button panel.
- Begin digitization of the second part of the piece with input of the grain line, and then point 2, where input of the first part was finished. Finish input in point 3, since point 1 is already in the system. Finish input of the second part with the command “Close contour”, input of the inner point (inscription) and the command “Save”.
Digitization of a graded piece
Digitization of a graded piece can be divided into two types:
1. Standard digitization of a graded piece, where the reference size is input, and the increments in the points are read with the help of a particular key of the digitizer cursor.
2. Digitization of a graded piece by size, when all sizes are input separately, and the pieces are assembled into a gradation later in “Constructor” program.
Standard digitization of a graded piece
In the window of piece parameters, specify the sizes, which will actually be digitized.
The sizes selected for work in the top right corner of the archiving window are highlighted with red.
To digitize a graded piece:
- Input the point of a smaller size with the help of the buttons of the control point (2 -
) or the end (3 -
) point, or double-click the buttons to make a dart.
- Input the increment for this point only in the sizes set in the piece parameters, with the help of the button 5 -
specifying them one by one from a smaller to a larger size (round green points).
The increments are read and divided into a number of intermediate sizes, automatically creating missing sizes, which were not selected in the window fir archiving parameters.
If an increment in the point equals zero, press the buttons 2 -
or 3 -
once.
Intermediate shaping points only affect the curve of the line and are not set by a graded piece.
1. Digitization of an even graded piece with equal increments. To input increments, select any two sizes in the size table (for example, the first and the last size of a graded piece). Other sizes of an even graded piece will be generated.
2. Digitization of a graded piece with leaps in increments. To input increments, select the limits of an increment range (leaps) in the size table: the first and the last size, as well as the sizes, in which the increment changes take place
ADDITIONAL MODE
If while inputting an even graded piece (or one with homogeneous increment leaps for all the points graded), some points are graded absolutely unevenly you need to:
- Digitize the piece up to this graded point
- Select the button menu point “Input by graded piece” and perform digitization of this point in the whole graded piece size by size, starting with the second smallest size, with the cursor button 5-
.
3. Digitization of an uneven graded piece. If a graded piece is uneven in all the points, all the sizes should be digitized after their selection in the window of piece parameters.
Digitization of a graded piece by size
To digitize a gradation from the pieces of separate sizes (when storing cardboard pieces of different sizes, etc), all sizes of one piece are input one by one and are automatically assembled into a gradation.
Before input of each new size, select the size of the current digitization in the window with the piece parameters and deselect the previous size. The other piece parameters (material, name) remain unchanged.
ATTENTION! A correct graded piece should contain an equal number of elements (inner contours, sections, points) and the beginning point for digitization must be common. That is why, after work in this mode, it is compulsory to perform “Control of a graded piece” for the piece given. Besides, you can’t select a different main contour for separate sizes in this mode.
Copy pieces from other models
You can copy pieces from ready models or the basic model and perform further operations with the pieces: modeling, creation of arbitrary pieces, etc.
The operation of copying pieces from a different model is performed in the window “Work with the database” (the button
of the vertical screen menu or the text menu points “Object/ Work with the database”).
Uniform (reference) pieces
When copying pieces in a special mode “Copy a reference”, reference pieces are created dependent on some basic piece of a different model. It allows to use standard uniform pieces in different models. Changes of the basic pieces are automatically transferred to other reference models.
Open pieces from a different model on the screen
Apart from copying pieces, you can open a piece (untitled) from a different model on the working screen. The viewed pieces can be renamed or deleted from the screen (Untitled pieces are not saved).
Operations in the window “Work with the database”: copy regular and reference pieces, as well as Open pieces from other models are described in the corresponding section of the manual.
Conversion of pieces from the formats of other systems
To work with pieces created in a different format (Investronika, Gerber, Lectra, DXF etc.), these piece must be converted to Julivi format. To do so:
- Select the text menu points “Object/ Convertor 3х”.
- Further description is given in the documentation for Converter program.
Creation of new pieces inside a model
Copy of a piece
To create an untitled copy of a piece:
You can also follow the text menu points “Piece/ Copy”.
- Specify the main contour of the piece to be copied.
An untitled copy of the piece can be named with the help of the function
- “Piece/ Parameters”.
ADDITIONAL MODE
1) To open the window “Piece parameters” at the time of piece creation, specify the piece while holding down the <CTRL> key.
2) A copy of the piece specified is created and moved on the screen while applying the function
- “Move piece” of the screen menu and holding down the <CTRL> key on the keyboard.
3) To save screen rotation for the copy, specify the piece while holding down the <ALT> key on the keyboard.
FEATURES It is important to specify the main contour of the piece after selecting it, to be able to use the “Reconstruction” function, since any other contour can be deleted in the process of work.
Standard pieces
Construction of an interlining
The function allows to create a new piece by means of setting the value of circular indention from the contour specified. Thus, you can create pieces for interlining or padding polyester. To do so:
· Select the PIECE tab and the button
in this tab. The cursor will be changed to
You can also follow the text menu points “Piece/ Standard pieces/ Interlining”.
· Specify the piece contour to make indention. The window with the interlining parameters is displayed on the screen:
· Input the indention value in the “Indention” cell. When a positive value is input, the indention inside the piece contour is done, and when a negative value is input, the indention is done outside the contour.
· Specify the type of the main contour for a new piece: Cut or Finished view.
ATTENTION! When selecting the Cut type, two contours are automatically created: the main contour – Working contour, and the derivative the Cut contour which copies it and which will be drafted in the layouts.
· If necessary, set additional parameters for construction:
DELETE NOTCHES
- option for deletion of all notches on the piece;
IGNORE INNER LINES
- switches off transferring of inner contours from the original piece.
· Press the YES button to create a piece, press the NO button to cancel construction.
An untitled piece is created inside (or outside) the specified closed contour of any type.
Construction from reference pieces and “Blocked for change” pieces is possible.
For pieces with a fold line, interlining is created without any allowance along the fold line and with a symmetry status.
· Specify the next piece to create an interlining with the same parameters, or right-click the mouse button to stop the function.
FEATURES
1. For automatic display of the “Piece parameters” window after creation of the piece,
select the special setting Dialogue “Piece parameters” (the text menu points “Settings/Program parameters/General/Constructor”)
2. The functional points of the original piece will be converted into checkpoints in the new piece.
3. When Finished view is set as the main contour, the Cut contour is created automatically, with zero indention (Cut is displayed in the layout, you do not have to create it separately).
Belt
Construction of pieces for a belt, plackets, etc. graded by the pieces specified for construction. For example, when specifying certain graded sections of the back and front skirt during construction, a graded piece of the belt is automatically constructed.
To make a construction:
· Select the PIECE tab and the button
in the tab. The cursor will be changed to
You can also follow the text menu points “Piece/ Standard pieces/ Belt”.
· Specify the start and the end points for each section, measuring them for construction as follows - L1, L2, … (one by one in the order of placement of the future piece sections).
· Click the right mouse button. The window with construction parameters is displayed on the screen:
· Set the belt width, seam allowance, button catch, and fabric shrinkage coefficient in the “Shrinkage” cell.
You can also set a fold line along the piece width, or a symmetrical rotation of all the sections by length.
· Specify the contour type for a new piece: Cut or Finished view.
· Press the YES button to create a piece, to cancel construction press the NO button. An untitled piece is created on the screen, which can be renamed in the “Piece parameters” window.
FEATURES 1. 1. For automatic display of the “Piece parameters” window after creation of the piece, select the special setting Dialogue
“Piece parameters” (the text menu points “Settings/Program parameters/General/Constructor”)
2. Specification of the sections of the measured pieces between the points of different sections is done along the straight line. The distance between the points of the same section is only measured along the curve.
Facing
To construct a facing of a set width from the specified sections or an interlining for the bottom of an item with a set indention from the sections:
· Select the PIECE tab and the button
in this tab. The cursor will be changed to
You can also follow the text menu points “Piece/Standard pieces/Facing”.
· Specify one or several pieces (clockwise), from which facing will be created, and right-click the mouse. The window for input of parameters is displayed on the screen:
· Set the facing width. To input a variable facing width, switch on the option In the end
and fill in 2 width cells for the beginning and the end of the construction section (clockwise)
· Specify the type of the main contour for a new piece: Cut or Finished view.
ATTENTION! When Cut is selected, two contours are automatically created: the main contour (Working contour), and the derivative contour of the Cut copying which will be drafted in the layouts.
· For interlining padding you can set indention from the specified section in the Indention cell
· If necessary, set any additional construction parameters
Do not combine sections at equidistance – an option for separation or combination of all equidistances (parallels with indention from the specified sections) into one section on the facing in several pieces.
Transfer notches to equidistance – transfer of notches t from the specified section to equidistance
Ignore inner lines – transfer of inner contours from the original piece.
Delete notches – option for deletion of all the notches of the piece. When an option is selected, the mode “Transfer notches to equidistance” is blocked as unessential
Press the YES button to create a piece, press the CANCEL button to cancel construction.

The indention set is measured from the specified section and all the adjacent sections, included in the construction width, except the equidistance section:
FEATURES
The function is not available for superposed pieces on the screen.
When specifying the sections, SKIP the sections which are equal or less than the facing width (similar to the option “Skip section” when setting seams), otherwise the pieces of incorrect shape, with “loops” will be created.
1. When constructing facing from a piece with a fold, it does not have an unfold line, and indention will be measured from the reference fold line, unlike the function “Construction of interlining”. If necessary, move additionally a facing section up to the fold level of the reference piece.
Other specifics of work are similar to those described for the function “Construction of interlining”.
Facing for several pieces
To construct facing for the sections of several superposed pieces:
Create a group of superposed pieces with the help of the commands ![]()
of the screen menu.
· Select the PIECE tab and the button
in the tab. The cursor will be changed to
. You can also follow the text menu points “Piece/Standard pieces/Facing for several pieces”.
· Specify the first (clockwise) section (1), limiting construction
· Specify the section (sections) to measure a parallel from (equidistance (2а, 2б)).
· Specify the second section (3) limiting construction.
· Click the right mouse button. The window with facing parameters is displayed on the screen
· Set the facing width. Select the option In the end
to input variable facing width and fill in 2 width cells for the beginning and the end of the construction section (clockwise)
· Specify the type of the main contour for a new piece: Cut or Finished view.
ATTENTION! When Cut is selected, two contours are automatically created: the main contour (Working contour), and the derivative the Cut contour, which copies it and which will be drafted in the layouts.
· If necessary, set any additional construction parameters
Do not combine sections
– an option for separation or combination of all equidistances (parallels with indention from the specified sections) into one section on the facing.
Transfer notches to equidistance
– transfer of notches t from the specified section to equidistance
Delete notches
– option for deletion of all the notches of the piece. When an option is selected, the mode “Transfer notches to equidistance” is blocked as unessential
Press the YES button to create a piece, press the CANCEL button to cancel construction.
1. Pieces must be specified in clockwise direction, then the group of superposed pieces is a single piece for setting the order of outline contour.
2. Place of specifying limiting sections must be included in the width of the future piece.
ATTENTION! When Cut is selected, two contours are automatically created: the main contour (Working contour), and the derivative the Cut contour, which copies it and which will be drafted in the layouts.
· For interlining padding you can set indention from the specified section in the Indention cell
· If necessary, set any additional construction parameters
Do not combine sections at equidistance – an option for separation or combination of all equidistances (parallels with indention from the specified sections) into one section on the facing in several pieces.
Transfer notches to equidistance – transfer of notches from the specified section to equidistance
Ignore inner lines – transfer of inner contours from the original piece.
Delete notches – option for deletion of all the notches of the piece. When an option is selected, the mode “Transfer notches to equidistance” is blocked as unessential
Press the YES button to create a piece, press the CANCEL button to cancel construction.
FEATURES
1. You should specify the sections clockwise. In this case the group of superposed pieces is the only piece to determine the order to go round the contour
2. The place marking the limiting sections should be included in the width of the future piece.
3. You can work with a single, free piece, as well as specify the sections for the contours of different type.
For example, you can construct a piece for facing of the back neck (whole, with later setting of the fold line), specifying the sections of the stitched detail as follows:
· Specify the first limiting section (1) along the middle seam of the back (contour of Finished view)
· Specify the second section (2) for construction of an equidistance on the neck section along the Cut
· Specify the last limiting section (3) on the shoulder section along the Cut contour.

4. Combination of equidistances lines is switched off by default for the commands ![]()
, - “Piece/ Facing” and “Facing for several pieces”, but they are combined automatically on smooth unbroken joints of the sections except the points of contour bend (shoulder/armhole; and other sections). It excludes search for crossings of nearly parallel sections. The option is blocked in the mode “Variable width”.
Flounce
To construct a flounce piece:
· Select the PIECE tab and the button
in this tab. The cursor view will be changed to
You can also follow the text menu points “Piece/ Standard pieces/ Flounce”.
· Specify the beginning and end points of each section or parts of the sections, measuring them the following way for construction (points 1-2 – length L1, points 3-4 – length L2, and so on).
· Click the right mouse button. The window for construction parameters is displayed on the screen:
· The inner buffer of the function (L1, L2, L3 etc.) is automatically input into the construction.
Other parameters should be input instead of default values: flounce width, seam allowance in the beginning and the end of the flounce
· Press the YES button to construct a piece, press the CANCEL button to cancel construction.
The piece of a flounce with the main contour is displayed on the screen: Finished view with notches at lengths of the specified sections. The length of the inner radius equals the section (sections) measured on the screen. The Cut contour with seam allowance along the flounce width is constructed outward from the Finished view:
To construct a flounce with a rounded end, set an indention along the outer edge of the piece.
Other actions for construction of pieces
Save contour as a piece
The function of the CONTOUR tab
- “Save as piece” allows to construct a new piece: make an inner contour or construct a seam contour and save it as a separate piece.
Modeling operations
The function of the MODELING tab
- “Cut piece into two parts” constructs two new pieces by division of the reference piece into two parts along the specified line.
The function of the MODELING tab
- “Assemble piece” constructs a new piece by “assembling” it from different sections, inner contours of one or several pieces.
Copy pieces within a model in the “Work with the database” window
You cannot only copy pieces from a different model, but from the Working model as well in the window “Work with the database”. At the same time you do not have to select an Active model in the database from which the pieces are copied. Selection of pieces is done in the Working mode loaded to the working window.
To copy pieces within the model:
· Select the button
of the vertical screen menu or follow the text menu points “Object/ Work with the database”. The window “Work with the database” is displayed on the screen.
· Switch to the PIECES tab of the window and select the button for copying
in the command block.
· Select the piece to be copied with clicking the line with the piece name. The piece view is displayed in the View window, and the line becomes highlighted with blue.
· Press the button
to copy one piece highlighted with color. The window with “Piece parameters” is displayed on the screen to input new material, the name of the piece and its other attributes.
ATTENTION! To select a piece to be copied, you can also click the cell before the name of the piece
, or double-click the piece line. However, copying pieces within a model is done one at a time, and if one or several other pieces in the list have been selected
in the meanwhile, they will not be copied at the moment.
Construction of pieces with the help of macrocommands
With the help of macrocommands you can construct ready pieces (including sets of pieces) at one go according to the suggested scheme. The construction principles of such pieces are the same from model to model, only their construction parameters are changed. It significantly speeds up the construction process of standard pieces of the same type. The constructor can construct macrocommands in the program “Macro editor”, or use a number of standard constructions available in the program.
To construct pieces with the help of macrocommands:
· Follow the text menu point “Macrocommands”, select the “Piece” group, then in this tab select “Piece –constructions”, or any other available group of piece constructions.
· Select a necessary macrocommand for piece construction and perform it according to the description
You can also call the macrocommands with the help of the button menu of the program. To do so:
· Select the PIECE tab and the button
in the tab.
· The window with the set mode for opening macrocommands (button
) is displayed on the screen
· Select the Group of projects with pressing the button of the drop-down list
. The list of macro constructions for a given group is displayed in the “Projects” window:
· Specify the line with the necessary macrocommand and press SELECT button
· The “Reference data” table is displayed to input the necessary construction data
· Press the YES button to confirm the new data, press CANCEL to cancel the changes.
The variants of constructed pieces will be reviewed below on the examples of specific macrocommands:
A piece constructed on the basis of input construction values (ungraded and graded)
A piece constructed on the basis of reference data (points, sections) specified on the screen
(for example, after specification of the back neck section and the forepart, we get the collar piece on the screen )
Set of pieces on the basis of reference data specified on the screen (after specification of the points for pocket entrance on the screen, we get a full set of pocket pieces: pocket lining, pocket facing etc.)
Construction of pieces on the basis of input values
Macrocommand “Frill flounce piece”
To construct a flounce piece:
Select the text menu point “Macrocommands/ Piece/ Frill-flounce”.
The “Reference data” window is displayed on the screen. It has the following tabs: MEASURED DATA – piece parameters which can be changed during construction, DESCRIPTION – sketch and description of performance of the command, SIZES – definition of construction size (basic size-height-width).
· Switch to DESCRIPTION tab and read description of performance of the command.
· Change the construction parameters in MEASURED DATA tab inputting them in the “Value” cell instead of the data set by default.
· Press the YES button to confirm data, press CANCEL to cancel construction
When the values are input by hand, the piece is only constructed on the screen in one basic size and height.
Other sizes of the gradation can be generated in different ways:
1) Piece gradation in the Increment table (button
of the screen button menu).
When zero increments are input, an ungradable piece will be constructed.
2) Construction of an ungradable piece when gradation types are switched off in the piece parameters
3) Construction of a graded piece by the data in “Seam algebra” and “Calculator” buffer.
Construction of an ungradable piece
You can switch off gradation types by sizes, heights, and widths in the window “Piece parameters” (function
- “Piece/ Parameters”) to construct an ungradable piece:
Switching off a necessary gradation type clears the piece in this criterion, repeating the shape of the piece in the basic size without special input of zero increments.
ATTENTION! If you need to grade a piece by size, height, or width, the switched off gradation type must be preliminarily switched on.
Construction of a graded piece
To input different values by sizes, you can use data from the buffer (
- tab F, or other “Calculator” tabs - G, H, I…). To do so:
1. Measure the necessary section or the distance on the screen and save data in the buffer or the “Calculator” tabs (for example, measure a section of the piece for facing a flounce).
2. Click the necessary line of values in the “Reference data” window of the macrocommand with the left mouse button (highlight with blue).
3. Click the right mouse button. The list of “Calculator” tabs is displayed.
4. Select a necessary tab in the list, for example tab F, with specification of the line of the tab name.
A formula will be input in the cell instead of the value (for example,
), and the piece fully graded on the basis of the data input will be displayed on the screen.
For example, the parameter L (length of the inner section of the flounce) of the flounce constructed on the screen will equal the length of the working piece measured and saved to the buffer.
Construction of a set of pieces on the basis of the reference data from the screen
Macrocommand “Jacket collar piece for a round neck”
To construct a set of collar pieces:
· Select the text menu points “Macrocommands/ Piece collars/ Collar – Jacket collar, round neck”. The “Reference data” window is displayed on the screen:
· Move to DESCRIPTION tab and read the terms of performance of the command.

· In MEASURED DATA tab, change the reference data of the construction, by its input in the “Value” cell instead of the data set by default.
To input different values by sizes, the data from the saved buffer are used (
) - tab F and other “Calculator” tabs (click a necessary cell with the left button to highlight the line, and then click with the right mouse button and select the tab name (F, G…) in the floating menu ).
Press the YES button of the table. The cursor view is changed to
The scheme of specification of the piece elements (sections, points) is displayed in the right corner of the screen: element to be specified is highlighted with color, and the text hints are displayed on the lower panel.
· Following the hint, specify the section of the back neck (1), the section of the forepart neck (2), the forepart shoulder, the section of the lapel fold (4), and the section of the lapel end (5).

· Untitled pieces of the top and bottom collar are displayed on the screen. If the reference pieces (forepart, back) have been graded, the collar pieces will also be graded by sizes.
FEATURES 1. For automatic display of the “Piece parameters” window on the screen when constructing a piece, switch on the option
(the text menu points “Settings/Program parameters/General/Constructor”).
2. Specifics of display of reference construction data on the screen:
To select several pieces as a single one, hold down the < SHIFT > key on the keyboard.
To select a section of the piece, specify its two points, while holding down the <SHIFT> and the <CTRL> key at the same time.
3. For the macrocommands with a large set of pieces, you can view the basic name of “Macro editor” given in the “Piece parameters” window to identify similar pieces when naming them.
4. You can use the screen menu commands
- “Delete the last selected element” and “Abort the command” in case of false selection of the elements.
5. ATTENTION! Location of a piece on the screen for specification of reference elements must correspond with the macrocommand scheme, if this condition is mentioned in construction description.