Design:Method of working with project

This section describes an example of constructing a base of a straight skirt using methodology “Muuler and son”.

• Creating a project.
• Filling in measurement tables.
• Making a construction drawing.
• Building-up seams.

Creating Project

Select the Project/ New menu item. A window will be displayed on the screen where the group (Piece By Muuler and son) and the name of the project (Skirt) need to be specified. Besides, constructions can be performed with the reference to the Size Base (“Muuler sizing”)

• Press the Yes button. The created project will get to the program working window at once.
• Fill in the data tables which will be used for constructing.

In order to do this, press button (initial data) of the button menu. A table for data input will be displayed on the screen.

Fill in the Measurement tab:

Fill in the Tolerances and constants tab:

Fill in the Variables tab:

Making Skirt Construction Drawing

• Put the initial point (P1) in arandom location on the screen using the Point/Randomly located point function ( button ofthe button menu);
• Draw straight line L1 from point P0at the angle of 90 degrees using the Lines/Straight line from point at random angle function ( button);
• Put point P2 at the distance of SWH, from P1 at the angle of 90 degrees usingthe Point/ Point located at set distanceand set angle relative to another point function ( button);
• Put point P3 at the distance of SKL, from P1 at the angle of 90 degrees usingthe Point/ Point located at set distanceand set angle relative to another point function ( button);
• Draw straight line L2 from point P1at the angle of 90 degrees using the Lines/Straight line from point at random angle function ( button);
• Draw straight line L3 from point P2at the angle of 0 degrees using the same function;
• Draw straight line L4 from point P3at the angle of 0 degrees using the same function
• Put point P4 at the distance of [0.5]*H+IFH from point P2 at the angle of 0 degrees using thePoint/Point located at set distance andset angle relative to another point function ( button);
• Put point P5 between points P2 andP4 dividing the distance in the ratio [0.5] using the Point/Point dividing distance between twoother points in set ratio function ( button);
• Draw straight line L5 from point P4at the angle of 90 degrees using the Lines/Straight line from point at random angle function ( button);
• Draw straight line L6 from point P5at the angle of 90 degrees using the Lines/Straight line from point at random angle function ( button);
• Put the point of intersection (P6)of line L2 with line L6 using the Point/Pointof intersection of two lines function ( button);
• Put the point of intersection (P7)of line L4 with line L6 using the same function;
• Put the point of intersection (P8)of line L2 with line L5 using the same function;
• Put the point of intersection (P9)of line L4 with line L5 using the same function;
• Put point P10 at the distance of 1.00cmfrom point P6 at the angle of 270 degrees using the Point/Point located at set distance and set angle relative to anotherpoint function ( button);
• Draw segment L7 connecting points P1and P3 using the Lines/ Segment betweentwo points function ( button);
• Draw segment L8 connecting points P3and P7 using the same command;
• Draw segment L9 connecting points P7and P9 using the same command;
• Draw segment L10 connecting pointsP9 and P8 using the same command;
• Draw segment L11 connecting points P7and P5 using the same command;
• Put point P11 at the distance of (SWD-FDW-BDW)/[2] from point P10 at the angle of 180 degrees using the Point/Point located at set distance and set angle relative to anotherpoint function (button);
• Put point P12 symmetrical to pointP11 relative to line L11 using the Point/Pointsymmetrical to particular point relative to line function ( button);
• Draw segments L12, L13, L14, L15 forbuilding Back dart point by point P12 and P8 with BDW and BDL using the Constructions/ Belt dart function ( button);
• Put point P32 between points P11 andP1 at the distance of DFD using the Point/Point located online at set distance function ( button).
• Draw segment L16 with the lengthequal to FDL from point P32 at the angle of 90 degrees using the Lines/ Segment of set length function ( button);
• Put point P34 at the distance of [0.5]*FDW from point P32 at the angle of 180 degrees usingthe Point/ Point located at set distanceand set angle relative to another point function (button);
• Put point P35 symmetrical to pointP34 relative to line L16 using the Point/Point symmetrical to particular point relative to line function ( button);
• Put point P36 at the distance of 3,00cm from point P1 at the angle of 180 degrees usingthe Point/ Point located at set distanceand set angle relative to another point function (button);
• Draw spline L17 through points P1, P36, P34 using the Lines/Spline function ( button);
• Draw segment L18 connecting pointsP34 and P33 using the Lines/ Segmentbetween two points function ( button);
• Draw segment L19 connecting pointsP35 and P33 using the same command;
• Draw “Bezier” L20 based on pointsP35 and P11 using the Lines/ Beziercurve function ( button);
• Draw segment L21 connecting pointsP11 and P5 using the Lines/ Segmentbetween two points function ( button);
• Put point P37 dividing line L21 inthe ratio [0.5] from point Р13 using the Point/ Point dividing line in set ratio function ( button);
• Put point P38 at the distance of0.7cm from point P37 at the angle of 90 degrees to line L21 using the Point/ Point at set distance from point atangle to line function ( button);
• Draw spline L22 through points P11, P38, P5 using the Lines/Spline function ( button);
• Copy the line L22 using the Changes/ 'Copy the line(s)' function ( button);
• Mirror around L11 the line L22_0 using the Changes/ 'Mirror the line(s)' around the line function ( button);
• Remove the line L22_0 using the Changes/ 'Remove line section' function ( button);
• Draw segment L23 connecting pointsP2 and P5 using the Lines/ Segmentbetween two points function ( button);
• Draw segment L24 connecting pointsP5 and P4 using the same command;
• Assemble ready view outline C1consisting of lines L7,L17,L18,L19,L20,L22,L11,L8 using the Piece(s)/ Assemble outline function ( button);
• Assemble Inner contour C2 consistingof lines L23 using the same command;
• Assemble the Front piececonsisting of outlines C1, C2 using the Piece(s)/ Assemble piece function ( button);
• Assemble ready view outline C3consisting of lines L22_0,L12,L13,L14,L15,L10,L9,L11 using the Piece(s)/ Assemble outlinefunction ( button);
• Assemble Inner contour C4 consistingof lines L23 using the same command;
• Assemblethe Back piece consisting of outlines C3, C4 using the Piece(s)/ Assemble piecefunction ( button);

Constructing Seams

Further operations with ready pieces are carried out in the piece handling window (). In order to go to it, press the left mouse button for its activation.

• Construct seams on pieces using function of the Piece tab.

• Construct the dart opening using the Construct dart opening function () of the Piece tab.