Constructor:Working with pieces in the window Working with the database

From Julivi Help
Jump to: navigation, search

General order of performing operations with pieces

Open “Work with the database” window (screen menu command embim327.png- Object/ Work with the database).

·        Select PIECES tab, if it is not already open

·        When shifting to PIECES tab, “Open pieces” mode embim328.png is switched on automatically.

embim329.png

·        Select one of the modes for work with pieces

When a command is selected, its name is displayed above the panel. The appearance of the two buttons above the panel is also changed.

These are commands for performance of a selected function:

Left button (one lightning): performing a function for several pieces selected in the list.

embim330.png

Right button (two lightnings): performing a function for all the pieces of the model

·        Select pieces from the list to perform a set command

To select all pieces of one material, click the cell with the name of the material.. embim331.png To select several pieces, click the cell with the names of the pieces embim332.png, or double-click the line.

To select one piece, click the line of the piece. The line is highlighted with blue, and the cell against the line is not selected.

           The buttons for organizing work with the list are located above the list of pieces:

embim333.png- select all pieces; [[Image:embim334.png|embim334.png] ]cancel selection; embim335.pngcancel highlighting of lines with red (errors etc.)

 

ATTENTION! If one piece in the list is highlighted (when clicking the line), while the second and the third ones are selected with clicking the cells, the operation will be performed with the selected pieces, not with the highlighted one.      

·        Perform a set command with selection of one of the two buttons above the command panel:

Button embim33.png- performing a command for several selected pieces (with selected cells),

                   or for one piece highlighted with blue.

Button embim337.png- performing a command for all the pieces in the list, regardless selection.

·        Selected action is performed “obviously” (for example, a piece is deleted from the list), or a message about command performance is displayed on the screen. (Press the button embim338.pngor ОК in the window):

embim339.png

If the mode selected cannot be performed, the piece line in the list is highlighted with red.

 

 

ATTENTION! When performing commands in “Work with the database” window, the working screen for pieces is cleared

The view of the button for clearing the screen embim340.png is changed to the view embim341.png ]of screen restoration command.        

When the button embim342.png is selected (or the menu points Window/ Restore the screen) the last screen with pieces (untitled as well) is restored after the work of all the panel functions, except “Restoration” embim343.png .

The pieces are saved in the database if the option embim344.png is switched on (Settings/ Program parameters, GENERAL/ Constructor tabs).

FEATURES 1) If the piece cannot be restored on the screen (if deleted embim346.png , etc.) the restored screen will contain all  the pieces except this piece, and a message will be displayed:

2) If only a part of materials is selected for work, “Perform for all pieces” command

embim347.png

will only work with selected materials (in other words, not for all the pieces, but only for the pieces visible in the window of the list)

Opening pieces from other models

Apart from copying pieces from a different model along with all the parameters of the reference piece, you can open an untitled piece from the Active model to the screen of the Working model. After viewing, you can name the piece or delete it from the screen (untitled pieces are not saved in the database).

To open pieces from a different model to the working model:

·        Open “Work with the database” window embim350.png (Object/ Work with the database).

·        Switch to OBJECTS tab if it is not already open.

·        Load the Working model to the window where the pieces will be opened.

 

To do so, select a model from the list and perform “Make the object a working one” command embim351.png.

·        Activate the model, from where the pieces will be opened

In order to do so, select a model from the list (with clicking the line), but do not load it to the working window.

The background of the Active model window becomes light yellow. embim352.png ·       

Switch to PIECES tab and select “Open pieces” mode with pressing the button embim353.png.

embim354.png

·        Select the pieces to open, viewing them in the right view window

To select all pieces of one material, click the cell with the name of this materialembim331.png.

To select certain pieces, click the cell with piece names embim356.png.

The selection buttons above the list of pieces are: embim357.png- select all pieces; embim358.png- cancel selection;

·        Open pieces with the button embim359.pngor embim360.png- for selected pieces or all the pieces.

·        When the process is finished, a message is displayed (Press the button embim361.png or ОК)                                                                       

The pieces of the Active model will be displayed in the Working model window untitled.

To save these pieces to the working model, you need to name them (embim363.png - Pieces/ Parameters).

Untitled pieces are not saved to the database and will be lost when deleted from the screen.

If a size you try to open is not available in the model, the piece in the list will be highlighted with red.

·        With the button embim364.png above the command panel, you can return to the list of pieces of the Working model. The background of the window becomes white and connection with the Active model is off.

embim365.png


Opening pieces from the model with a different scale

When opening pieces from the model with a different scale, a switch above the command panel embim366.png is activated to set size compliance for the Working and the Active models.

embim367.png - Open basic size and height to basic size and height. The basic size of the pieces of the Active model is opened, with its automatic transfer to a basic size of the Working model, and the other sizes are distributed accordingly.

embim368.png - Open sizes by text matching. For example, size scales 34, 35, 36, 37, 38 and 34, 36, 38, 40, 42 have matching text 34, 36, 38. embim369.png - Full search of size and heights. Setting size compliance in a special table.

For example, if the pieces are of sizes 84 – 120 and heights 158 – 170, you need to open models with the size range 36 – 48 on the screen to set size compliance in the table.

Making “Size compliance” table:

·        Press the button embim370.png . The table for size compliance is displayed on the screen.

·        Specify the line of the required size and height in “Old sizes” column (it is highlighted), and then select a corresponding cell in the size table of the working model filling in “New sizes” column. When making an error in line selection, click it again. When finished, click YES button.

 

Table commands: embim371.png clear the table; embim372.png and embim373.png - save and read data from file.  

embim374.png

Copying pieces

Copying pieces from other models

Pieces of finished models or a basic model can be copied from one model to another and used in further work with pieces: design, creation of derivative pieces, etc.

To copy pieces from a different model to the working model:

·        Open “Work with the database” window embim375.png(Object/ Work with the database).

·        Switch to OBJECTS tab, if it is not already opened.

·        Load the Working model, to which the pieces will be copied, in the window

 

To do so, select a model from the list and perform the command “Make an object working”. embim376.png ·        Activate the model, from which the pieces will be copied.

To do so, select a model from the list (click the line) without loading it to the working window.

The background of the Active model window becomes light yellow.

embim377.png

·        Switch to PIECES tab and select “Copy pieces” mode with pressing the button    embim378.png

 

embim379.png

     

·        Select the pieces to copy viewing them in the right view window.

 

To select all pieces of the same material, click the cell with the name of the material. embim331.png To select certain pieces, click the cell with the name of the pieces. embim381.png

The selection buttons above the list of pieces are: embim382.png- select all pieces; embim383.png - cancel selection;

·        Perform the command with selecting the button embim384.pngor [[embim385.png for selected or all pieces.

·        The following message is displayed upon the process completion (Press the button embim386.png or ОК):

 
embim387.png

The pieces of the Active model are copied to the list of pieces of the Working model.

When copying pieces, graded pieces are transferred completely, regardless of size selection.

·        You can return to the list of pieces of the Working model with pressing the button embim388.pngabove the command panel. The background of the window becomes white and connection with the Active model is off.

 
embim389.png

If the size scales of the Active model and the Working model match, but have a different size range, a warning is displayed on the screen, and the sizes common for the two models will be copied

  embim390.png

If the size ranges do not have any common sizes, the following message is displayed and no copying is performed:

  embim391.png
 

Compliance of sizes between the models of the same scale is determined by text match (size 34 – to size 34), and compliance of basic sizes of the two models is not obligatory in this case.

 

If the size scales of the Active and the Working model do not match, select one of the three modes for size compliance (the buttons are only activated when model scales do not match):

embim392.png- Copy the basic size and height of the active model to the basic size and height of the working model. Compliance for other sizes is set on the basis of shift in the basic size (if any).

embim393.png- Copy sizes by text match (size 38 - to 38, size 40 - to 40, etc.)

embim394.png- Full search of sizes and heights of two scales set in the size compliance table.

To create a Size compliance table specify the line of required size and height in “Old sizes” column (it becomes highlighted), and then select a corresponding cell in the size table of the working model, filling in “New sizes” column. Double-click the mouse on the row if it is selected by mistake.

  embim395.png

Other commands of the table:[[embim396.png - clear set matches; embim397.png embim398.png- save and read data from file.  

           

FEATURES 1) One material cannot contain two pieces with the same name

If the names of the pieces copied match with the ones already existing in the model, the following message is displayed on the screen:

  embim400.png

embim401.png- replace an existing piece with a piece copied from a different model. embim402.png- replace all existing pieces selected from the list, with all pieces copied from a different model.

embim403.png- copy a piece by renaming it. An existing piece is saved, the window for input of a new name and material of the piece copied is displayed on the screen.

  embim404.png

embim405.png- Merge sizes of graded pieces WITH THE SAME NAME into one piece. For example, merge two foreparts (with bust dart and without it) into one piece.

embim406.png - Merge all graded pieces selected from the list.

    Conditions for merging of graded pieces:

·        Copying of pieces only within one size scale.

·        Obligatory match of material and piece name in the current piece.

·        Upon coincidence of some sizes of the graded piece, old sizes will be replaced with new ones.

 

 

embim407.png cancel piece copying

2) You can change the order of pieces in the list, in accordance with the setting. embim408.png:

Database: the order is formed according to the list of pieces compiled in “Utilities” program.

Creation: pieces are listed in the order of their creation in the model.

This option is convenient when copying a large number of pieces from a different model: new pieces are shown at the end of the list. It only applies to the new pieces created in any process: conversion, copying, etc., but does not apply to renamed pieces.

«Unified» (reference) pieces

Creation of unified pieces

When Pieces are copied embim409.png from a different model, reference pieces are created when the option embim410.png is switched on. Such reference pieces are linked to the copied (basic) piece of the other model.

It allows to use standard unified pieces in different models. Changes in basic pieces are automatically transferred to all reference models.  In other words, if pieces of the basic model are modified, it is not necessary to perform the same actions in all other reference models.

  embim411.png

The mode for copying a link only works when copying pieces from a model with the same size scale.

Unified pieces are marked with letter U in the list of pieces.

Work with unified pieces

In this mode not the actual pieces, but only references to them are copied, that is why such pieces are not WORKING pieces. They are displayed on the screen in pale color, in the mode where “changes are not allowed”.

These pieces can only be changed in the basic model, while in reference models they can only be measured and used for screen operations. For groups of superposed pieces, reference pieces are used as counting elements, or fixed objects for performing functions and measurements.

The window for reference piece parameters (embim412.png - Piece/ Parameters) includes a basic model code and the name of the basic piece. When basic pieces are renamed, this data changes automatically.                  

embim413.png

You can change the parameters of a reference piece: material, name, amount (apart from grading type: type options are not displayed in the parameter window). When the basic piece parameters (name, material, quantity, rough cut and shrinkage parameters) are changed reference piece remains without change.

Removing “Unified” status of a piece

To remove “Unified” status of a piece, switch off an option embim414.png in the window of reference piece parameters (embim415.png - Piece/ Parameters). Removal of link between the reference and the basic pieces allows to work with a free piece in full.

The following messages are displayed on the screen to confirm the changes made after switching off “Unified” option:

 embim416.png
  embim417.png

If you confirm the changes (YES button), information on uniformity is cleared in the parameter window:

  embim418.png

FEATURES 1) When deleting a basic piece, a list of its reference models is displayed. To delete a piece, remove uniformity in “Piece parameters” window.

  embim420.png

2) When the reference pieces have been deleted, but left in “Deleted pieces” window, they can be deleted in the basic model. “Deleted pieces” window of the reference model is cleared automatically.

3) Unified pieces cannot be copied to a different model (they are highlighted with blue). The other functions from “Work with the database” window like “Delete sizes”, “Grade additionally”, “Shift sizes”, “Reconstruction”, “Fixation” are not applicable to them either. Any changes to size or height are only made in the basic model.  Basic size change or sizes/heights addition have no effect on the reference piece. The basic model scale cannot be changed without removing reference piece status.

4) When copying a model (embim.421.png- “Save an object as…”) with reference pieces, a new copy of the model has reference to the first basic model, not to the model, which was copied.

Any reference model cannot be copied with its scale change without removing “uniformity” status of pieces.

Copying pieces within a model

You can copy pieces within a model not only on the screen (embim422.png - Piece/ Copy), but also in “Work with the database” window you can copy pieces from other models as well as within a model.

For example, pieces of one material can be copied to a different material of the same model.

    To copy pieces within a model:

·        Open “Work with the database” window (Object/ Work with the database). embim423.png

·        Switch to PIECES tab and select “Copying pieces” mode with pressing the button embim424.png.

embim425.png

·        Select a piece to copy (one) with clicking the line with the piece name

The piece is displayed in the View window, and the line is highlighted with blue

·        Perform the command of copying by pressing the button. embim426.png

“Piece parameters” window is displayed to input new material, piece name and other parameters. 

ATTENTION! To select a piece to copy, you can click the cell before the piece name embim427.png , or double-click the piece line. However, copying pieces within a model is only performed one at a time, and if one or several other pieces of the list were marked embim428.png, they will not be copied at the moment.

Deleting pieces

Pieces can be deleted partially embim429.png (in several sizes) or completely, in all sizes.

To delete a piece completely:

·        embim430.png Open “Work with the database” window (Object/ Work with the database).

·        Switch to PIECES tab and select “Delete pieces” mode with pressing the button embim431.png

embim432.png

·        Select pieces to be deleted

To select all pieces of the same material, click the cell with the name of the material.embim433.png.

To select separate pieces, click the cells with the names of the pieces. embim434.png

The selection buttons above the list of pieces are: embim435.png- select all pieces; embim436.png- cancel selection

·        Delete pieces with pressing embim437.png or embim438.png- for the pieces marked in the list or all the pieces;

A message is displayed on the screen, where you need to confirm deletion with pressing YES button:

Once deleted, a piece can be restored with Piece restoration mode
embim439.png
, which is activated when switching on the option

embim440.png under the window with the list of pieces.

 

FEATURES 1) When deleting a piece used in “Marker” program, the following message is displayed:

 
embim443.png

If the operation is continued, the piece is deleted from the layouts, leaving a blank space.

When a piece is restored from “Deleted” to the basic composition of pieces, these pieces will be displayed in the layout.

 

2) When a piece located on the screen with other pieces is deleted, the screen is cleared. After the screen is restored (Window/ Restore screen) embim444.png only existing pieces will remain on the screen, and the following message will be displayed:

embim445.png

Restoration of deleted pieces

Pieces can be restored after deletion, by returning to the composition of a model (with its properties saved).    

When deleted, pieces are moved to “Deleted pieces” window, from where they can be opened on the screen as untitled pieces embim446, restored embim447, or finally deleted embim448.

 

To restore a deleted piece:

Open “Work with the database” window embim449 (Object/ Work with the database).

Switch to PIECES tab and switch on the option embim450 under the list of pieces.

 

The list of deleted pieces is displayed and “Restore pieces” mode embim451 is activated.

embim452

·        Select pieces to be restored

To select all pieces of the same material click the cell with the name of the material. embim453

To select separate pieces click the cells with the names of the pieces. embim454

The selection buttons above the list of pieces: embim455- select all pieces; embim456- cancel selection;

·        Perform the command with pressing embim457 or embim458- for the pieces marked in the list or all the pieces.

The pieces are restored to the composition of the model with their properties saved (uniformity, etc.)

·        After finishing work in “Deleted pieces” window, switch off the option.embim459

The basic list of pieces for the model is restored.

To open deleted pieces on the screen (untitled), select the mode embim460 in “Deleted” window

To delete pieces completely from “Deleted” window, select the mode embim461 in this window.

FEATURES 1) When changing a size scale in the model, the window for “Deleted pieces” is cleared!

2) In case of changing a size range of the model, additional piece grading, etc, the pieces will not be changed in “Deleted” window. In other words, the operations in “Work with the database” window are not connected with “Deleted pieces” window.

embim462

So, when pieces are restored to a changed model, they may not match.

3) If all the sizes in the piece are deleted (embim464), but not the piece itself embim465), it will not be listed in “Deleted”.

4) If while working delete a piece, then create a new piece with the same name and delete it again, such piece will be listed as a new piece in the list of “Deleted pieces” each time, in a separate line in order of deletion. Thus, one material can have several pieces with the same name. The last deleted version of a given piece is at the very bottom (the process works the same way as files deletion to “Trash” in Windows).

  embim466

If trying to restore several pieces with the same name AT ONCE, the following message appears on the screen:

embim467

5)  If the list has a piece, which needs to be replaced (give a different name to a piece with a name already existing in the list), the old view of the piece will be displayed in “Deleted” window.

When restoring a piece with a repeated name from “Deleted” window,the following message is displayed on the screen:embim468

When replacement is confirmed (YES button), exchange of pieces takes place between the windows.

Deletion of piece sizes

A part of sizes in a piece can be deleted if the piece contains an incorrect size, or unnecessary sizes in the pieces of two groups (forepart with and without a bust dart). To do so:

·        Open “Work with the database” window embim469.png (Object/ Work with the database).

·        Switch to PIECES tab, and select “Delete sizes” mode with pressing the button embim470.png

embim471.png

·        Select pieces in which sizes need to be deleted

 

To select all pieces of the same material, click the cell with the name of this material embim331.png.

To select separate pieces, click the cell with the name of the piece embim473.png.

The selection buttons above the list of pieces are: embim474.png- select all pieces; embim475.png - cancel selection;

·        Mark the sizes to be deleted in the table

embim476.png

To select a size, click the corresponding cellembim477.png.

To select the whole row (or column), click the button with indication of size or height.

The buttons of a size table: [[embim478.png- select all sizes; embim479.png- cancel selection of all sizes.

·        Perform the command with the button embim480.png or [[embim481.png- for selected pieces or all the pieces. When the process is finished, a message is displayed (Press the button embim482.png or ОК)

embim483.png

FEATURES 1) To delete a piece completely select the command embim485.png in the mode panel.    

                                          Even if all the sizes in a piece are deleted, the line with its name remains.                          

2) A list of missing sizes is displayed for the pieces with an incomplete grading. For example, when opening these sizes from the database on the screen, or when opening graded pieces when work with “Seam algebra”, etc.

  embim486.png

3) If grading by sizes, heights, or width is switched off in piece parameters embim487.png (Pieces/ Parameters), it is impossible to delete a corresponding size, height, or width (i.e. an attribute which is switched off). If grading by heights is off, heights are not deleted, because when attribute of grading is switched off, pieces are created automatically according to a basic piece.

embim488.png

Automatic control of piece contents

Control of contents refers to availability of all graded sizes in a piece.  The program conducts automatic control, so that all the pieces are additionally graded, otherwise “Marker” program does not display pieces in all layouts.

It is advisable to perform automatic control when work with a model is finished. To do this:

·        Open “Work with the database” window embim489.png(Object/ Work with the database).

·        Switch to PIECES tab and select “Size control”  mode with pressing the button embim490.png

·        Select pieces for their contents control

  embim491.png

To select all pieces of the same material, click the cell with the name of the material embim331.png.

To select separate pieces, click the cells with the names of the pieces embim493.png

The selection buttons above the list of pieces are: embim494.png - select all pieces; embim495.png - cancel selection;

·        Perform the inspection with pressing embim496.pngor embim497.png - for the pieces selected in the list or for all the pieces.

The pieces, in which some sizes are missing, are highlighted with red. When such a piece is selected, deselected cells in the size table will show which sizes are missing.

Recommendation: initially perform the inspection of all the pieces embim498.png, and then of the pieces highlighted with red (incomplete ones) with the command embim499.png analyzing the size table.

embim500.png

A piece with an incomplete set of sizes can be additionally graded in “Work with the database”  window in Additional grading” mode embim501.png,  or with the help of the function embim502.png - Piece/ Create intermediate (all) sizes in the main program menu.

When grading by size, height, or width is switched off in the piece parameters embim503.png- Pieces/ Parameters), it is possible to get a piece, which is the same for all the sizes (by a basic piece).

embim504.png

Additional piece grading

After addition of sizes to the model parameters or deletion of incorrect sizes (embim505.png), a piece must be graded to its complete set. Additional piece grading is possible if it contains at least two sizes ( basic size is obligatory). Additional grading is performed proportionally, reading the increment value from the closest smallest size.

For additional piece grading:

·        Open “Work with the database” window embim506.png(Object/ Work with the database).

·        Switch to PIECES tab and select “Additional piece grading” mode with pressing the button embim507.png

 

The inspection for availability of all sizes in a graded piece is performed. The lines for fully graded pieces, which do not require additional grading, will be blocked (be inactive).

 
embim508.png

·        Select the pieces for additional grading (from those, which are active for additional grading)

 

To select all pieces of the same material, click the cell with the name of this materialembim331.png.

To select separate pieces, click the cells with the names of the pieces.embim510.png

The selection buttons above the list of pieces are: embim511.png- select all pieces; embim512.png- cancel selection;

·        Perform the command with pressing the button embim513.png or embim514.png- for selected pieces or all the pieces.

·        When done, the following message is displayed on the screen (Press the button embim515.png or ОК):

  embim516.png

FEATURES 1) If a piece does not have any sizes adjacent to the basic size (or there is only a basic size) additional grading is performed with a zero increment. As a result, the pieces repeating configuration of the basic size, will be created.

2) Additional grading is not performed for the pieces having any errors, with incorrect grading.

   The line is highlighted with red, and the following messages are displayed on the screen:

                         

embim518.png

YES Button: additional grading will be continued for other pieces in the list.

NO Button: additional grading will be stopped.

“Inspection of graded pieces” must be performed first for additional grading of these pieces.

 

3)  If a piece does not contain a basic size, a message is displayed on the screen.

Additional grading can be performed for such a piece only after specification of the basic size in the model parameters.

embim519.png

4)  Missing sizes of graded pieces can also be created with the help of the function embim520.png - Piece/ Create intermediate (all) sizes in the basic program menu



Additional grading in Children's scale

When doing additional grading in Children's scale, the general mode for performing the function is not available. However, it is possible to specify sizes for reading increments in “Determine size” mode of a given function.

For example, you need to do additional grading to a piece up to size 56/104 according to the value equal to an increment between the sizes 52/86 and 52/92, measuring this value from the last size of the graded piece (56-98).

 
embim521.png embim522.png

To receive a necessary size for a graded piece with size identification:

·        Open “Work with the database” window embim523.png(Object/ Work with the database).

·        Switch to PIECES tab and select “Additional grading of pieces” mode, with pressing the button embim524.png.

The functions for automated additional grading are blocked, and the switch “Identify sizes” is on by default.

embim525.png

·        Selecting the commands of “Identify sizes” mode one by one, specify 4 sizes

Minimal size and maximal size are initial and final sizes for determination of increments.

These are the smallest and the largest sizes, between which the increment value and direction will be calculated. To get size 34, the minimum size is set as 38, and maximum size is 36.

Basic size is a size used as a basic size. It is not the basic size of a model, but a size for calculation of the increment value. It can be the same as minimal or maximal sizes.

New size is a size to be generated.

Method for size identification:

·        Select the button embim530.png. The size table is displayed on the screen

·        Set the initial size for increments with clicking the necessary size cell.

 

·        Press YES button to confirm.

embim531.png

·        Select the buttonsembim532.png,embim533.png,embim534.png one by one, setting the sizes

embim535.png

·        Select the pieces for additional grading (from those active for additional grading).

 

To select all pieces of the same material, click the cell with the name of the materialembim331.png.

To select separate pieces, click the cells with the names of the piecesembim537.png.

The selection buttons above the list of pieces are: embim538.png- select all pieces; embim539.png- cancel selection;

·        Perform the command with pressing the button embim540.png or embim541.png- for selected pieces or all the pieces.

·        When finished, the following message is displayed (Press the button embim542.pngor ОК)

embim543.png

·        Only one size will be created with the help of this mode.

If necessary, you can repeat the operation for additional grading of another size.

This mode is not only used for a Children's scale: if some sizes in a piece have a bust dart, it is possible to create a size in one “section” of a graded piece, taking it from a different “section”.

embim544.png

Copying pieces from one size to another

With the help of “Identify sizes” option within additional grading function, it is possible to get a size for the graded piece by means of copying a different size of this piece.

For example, you need to get size 42, which actually complies with size 40.

To do so:

·        Open “Work with the database” window embim545.png(Object/ Work with the database)

·        Switch to PIECES tab and select “Additional piece grading” mode with pressing the button embim546.png

·        Switch on “Identify sizes” option

The commands for manual input of sizes for additional grading are displayed on the screen:

 
embim547.png

Minimal size and Maximal size are initial and final sizes for determination of increments.

Basic size is a size used as a basic size.

New size is a size to be generated.

·        Set the size being copied (40) three times: Minimal, Maximal, Basic; and set the size to be generated (42) as New..

embim556.png

·        Select the pieces for additional grading (out of those active for additional grading).

To select all pieces of the same material, click the cell with the name of this material. embim331.png

To select separate pieces, click the cells with the names of the pieces.embim558.png

The selection buttons above the list of pieces are: embim559.png - select all pieces; embim560.png - cancel selection;

·        Perform the command with pressing the button embim561.pngor embim562.png- for selected pieces or all the pieces.

·        When finished, the following message is displayed (Press the button embim563.pngor ОК):

embim564.png

If the size to be generated already exists in the graded piece, it will be automatically replaced with a new one.

ATTENTION! In Adults’ scale (and in Children's scale in the mode of using it as “adults’ scale”) “Identify sizes” mode does not work correctly when additional grading is done DIAGONALLY (the values are doubled because both size and height increments are taken into account). That is why, diagonal compliance for such scales (from size and height to size and height) should not be used!

 

Changing material of pieces

To transfer some pieces of a model to a different material (separation of the main and decorative fabric, etc.), you can change parameters one by one for each piece embim565.png (Pieces/ Parameters).

But to change material of several pieces at the same time:

 

·        Open “Work with the database” window embim566.png(Object/ Work with the database).

·        Switch to PIECES tab and select “Change material” mode , with pressing the button embim567.png

embim568.png

·        Select pieces for changing material from the list

 

To select all pieces of the same material, click the cell with the name of this material. embim331.png

To select separate pieces, click the cells with the names of the pieces. embim570.png

The selection buttons above the list of pieces are: embim571.png- select all pieces; embim572.png- cancel selection;

Perform the command with pressing the button embim573.pngor embim574.png- for selected pieces or all the pieces

The window with the list to select material is displayed on the screen

embim575.png

 

YES button confirms selection. The  pieces will be transferred to selected material.

FEATURES The piece highlighted with red in the list, is already in the required material. Different materials can contain pieces with the same name. In this case setting of material for the pieces with the same name will not take place.

 

 

Size and height shift of pieces

Size and height shift

After trying on the garment, it can turn out not to match the designated size: for instance, a garment of size 88 suits a figure of size 92. In this case, instead of correcting pieces, it is easier to make a shift of size (or height) row, transferring pieces from size to size.

                                              

In order to do so:

·        Open “Work with the database” window embim577.png(Object/ Work with the database).

·        Switch to PIECES tab if it is not already open

·        Select “Shift sizes” or “Shift heights” mode with pressing the button embim578.pngor embim579.png

embim580.png embim581.png

·        Set size (or height) compliance for the shift

 

In this mode a window split into two parts instead of a standard size table is displayed:

OLD embim582.png(existing sizes) and NEW embim583.png (sizes which should replace the existing ones).

The buttons embim584.png embim585.png shift size (height) rows for a bigger or smaller range accordingly.

embim586.png

·        Select the pieces to shift the scale

To select all pieces of the same material, click the cell with the name of this material.embim587.png

To select separate pieces, click the cells with the names of the pieces. embim588.png

The selection buttons above the list of pieces are: embim589.png- select all pieces; embim590.png- cancel selection;

·        Perform the shifting

To shift sizes, select the button embim591.pngor embim592.png- for selected pieces or all the pieces. To shift heights, select the button embim593.pngor embim594.png- for selected pieces or all the pieces.

·        When finished, the following message is displayed (Press the button embim595.png or ОК)

embim596.png

·        After shifting, one of the sizes (or heights) will have no match

ATTENTION! The size (height) having no match, will not exist in the piece.

This missing size (height) can be created with the help of the function embim597.png- Piece/ Create intermediate (all) sizes in the basic menu or embim598.png Additional grading in "Work with the database” window.

FEATURES In Children's scale shifting sizes and heights is possible, but because of MISSING pieces, sizes can be partially lost. That is why for shifting in Children's scale you can use a special compliance table

Size shift in Children's scale

 

For Children's scale you can set shifting rules manually, inputting matches in a special table of the shift mode. In order to do so:

·        Open “Work with the database” window embim600.png (Object/ Work with the database).

·        Switch to PIECES tab and select “Shift sizes” mode with pressing the button embim601.png

·        Select the button “Set rules for shifting sizes” embim602.png

embim603.png

·        A table to set size compliance after shifting is displayed on the screen

For this, select the line for size/height in “Old sizes” column (it is highlighted), and then select a size table cell, corresponding to it when shifting. This way you fill in “New sizes” column. When selecting a row by error, double-click it with a mouse.

When compliance setting is done, press YES in the table.

The columns for size shifting will be automatically filled in “Sizes” window.

 
embim604.png

·        Select the pieces to shift the scale

 

To select all pieces of the same material, click the cell with the name of this material. embim331.png

To select separate pieces, click the cells with the names of the pieces. embim606.png

The selection buttons above the list of pieces are: embim607.png- select all pieces; embim608.png- cancel selection;

·        Perform the command with pressing the button embim609.png or embim610.png- for selected pieces or for all the pieces.

·        When finished, the following message is displayed (Press the button embim611.png or ОК):

embim612.png

·        After shifting, one of the sizes (or heights) will have no match

ATTENTION! The size (height) having no match, will not exist in the piece.

This missing size  can be created with the help of the function embim613.pngAdditional_grading in "Work with the database” window in its special mode “Determine sizes”.

Export of pieces to DXF format

DXF format is a standard international format for transferring electronic data created to exchange data between various CAD and other programs (Corel, etc.). JULIVI system has an option for exporting graded pieces (basic size+increments) or each size of a piece separately to DXF format .

Export of graded pieces to DXF format

 

·        Open “Work with the database” window (Object/ Work with the database)embim614.png

·        Switch to PIECES tab, and select “Export of graded pieces” mode with pressing the button embim615.png

 

On the right you will see a window with export settings to select necessary parameters for the files to export:

 

1)    Path selection tab: embimd3.pngselect the path for storage of files (a disc and a previously created folder)

embimd4.png

2)    Profile tab: embimd5.png select an export profile and format from the list

 
embimd6.png

a.     Set an export profile, i.e. select a system from the list to import the file (Comtense, Gerber, Lectra etc. or Standard ANSI-AAMA).

 

Corresponding settings are automatically installed in other tabs of the window.

With the help of the commands CREATE, SAVE, DELETE embimd7.png and EXPORT , IMPORT embimd8.png you can add or edit the list and transfer the profile settings in electronic form.

 

b.     Switch on the necessary export format.

 

Each size as a separate piece embimd9.png– export of a graded piece in one file (.DLX extension).

Basic size and increment table in different files embimd10.png– export of a graded piece in two files: basic size (.DLX extension) plus rules for making increments (.RUL extension).

 

3) Sizes tab: embimd11.png a window for selection of sizes for export.

 
embimd12.png

To select a size, click a necessary cell embimd13.png.

To select the whole row (or column), press the button with indication of size or height.

 

The buttons of a size table:  embimd14.png- select all sizes; embimd15.png - cancel selection of all sizes.

 

4) Texts, Contours, Layers, General tabs embimd16.png are supplementary parameters automatically installed during installation of one of the profiles in PROFILE tab.

If necessary, you can change parameters in these tabs.

 

5) TEXTS tab

embimd17.png

In the beginning of the name  at the end of the name – correction of text parameters.

For example, if there are pieces with the same name in different materials of the model, you can add index to such names during export, if the profile selected does not take such name.

You can select indexation in the beginning or at the end of the name.

 

Convert to Latin embimd18.png– transliteration of Russian into Latin if the accepting system does not recognize Russian coding.

 

Cut texts up to 10 symbols embimd19.png– cut the text if the selected profile has any limitations in the number of symbols for piece names, material names etc. (e.g. Lectra).

 

6) CONTOURS tab

Re-assort contours embimd20.png – Reassorting of contours for the systems where positive contour direction is determined counterclockwise.

Close contour (for closed contours) embimd21.png– Criterion for contour making in different systems.

Export hem, Export seam embimd22.png, embimd23.png – Settings forming the main piece contour:

On selection of one of the two contours it is assigned Main contour.

On selection of both contours, HEM becomes a main contour on the piece and SEAM is a contour of a ready garment (without saving seam values), or an internal contour.

LAYERS tab has correspondence of elements in pieces and layers accepted in .DLX format.

7) GENERAL tab

Autocad caption embimd24.png– service data (formation of an Autocad protocol file).

·        Select pieces from the list

To select all pieces of the same material, click the cell with the name of this materialembimd25.png.

To select separate pieces, click the cells with the names of the pieces embimd26.png.

The selection buttons above the list of pieces are: embimd27.png- select all pieces; embimd28.png- cancel selection;

·        Perform the command with pressing the button embimd29.pngor embimd30.png- for selected pieces or for all the pieces

The result of export of a graded piece is creation of a model file in a selected folder in accordance with the selected format in PROFILE tab of the window for export settings.

embimd31.png

Export of pieces to DXF format

·        Open “Work with the database” window embimd32.png(Object/ Work with the database)

·        Switch to PIECES tab, and select “Export of pieces” mode with pressing the button embimd33.png

 

On the right you will see a window with export settings to select necessary parameters for the files to export:

 

1)     Path selection tab: embimd34.pngselect the path for storage of files (a disc and a previously created folder)

embimd35.png

2)    Profile tab: embimd36.pngselect an export profile – a system to export the file (Comtense, Gerber, Lectra etc. or Standard ANSI-AAMA).

 
embimd37.png

Corresponding settings are automatically installed in other tabs of the window.

With the help of the commands CREATE, SAVE, DELETE embimd38.png and EXPORT, IMPORT embimd39.pngyou can add or edit the list and transfer the profile settings in electronic form.

 

3) Sizes tab: embimd40.pnga window for selection of sizes for export.

 
embimd41.png

To select a size, click a necessary cell embimd42.png.

To select the whole row (or column), press the button with indication of size or height.

 

The buttons of the size table:  embimd43.png- select all sizes;  embimd44.png- cancel selection of all sizes.

 

4) Texts, Contours, Layers, General tabs embimd45.png are parameters automatically installed during installation of one of the profiles in PROFILE tab (see export of graded pieces).

·        Select pieces from the list

To select all pieces of the same material, click the cell with the name of this material embimd46.png.

To select separate pieces, click the cells with the names of the pieces embimd47.png.

The selection buttons above the list of pieces are: embimd48.png- select all pieces; embimd49.png- cancel selection;

·        Perform the command with pressing the button embimd50.pngor embimd51.png- for selected pieces or all the pieces

The result of export is storage of pieces of each size, height and width in separate files.

embimd52.png