Constructor:Creating new pieces
Creation of new pieces
There are several ways to create new pieces in a model:
1) Export of pieces from “Designer” program
2) Input of pieces through a digitizer (Digitizing)
3) Copying (and opening) of pieces from other models
4) Conversion of pieces from the formats of other systems (Gerber, Assyst, etc.)
5) Creation of pieces within a model: copying, standard pieces, etc.
6) Creation of pieces with the help of macrocommandsExport of pieces from “Designer” program
Contents
- 1 Export of pieces from “Designer” program
- 2 Input of pieces though a digitizer (Digitizing)
- 3 Copy pieces from other models
- 4 Converting pieces from formats of other systems
- 5 Creating new pieces inside a model
- 6 Creating pieces with the help of macrocommands
Export of pieces from “Designer” program
To export pieces from “Designer” program for creation of base constructions:
· Create a new model or open a previously created model in the window “Work with the database” (
- “Object/ Work with the database”).
· Select PIECES tab in the horizontal menu and the button in it
or follow the text menu points “Piece/Do the project”. The window for selection of a project is displayed on the screen.
· Select the button for opening projects in “Designer” program
on the top panel of the window.
· Select the group of projects with pressing the button of the drop-down list

· Select the project for exporting in “Projects” window with highlighting the line of a necessary construction

· Select the pieces of the project in “Pieces” window with clicking the cell before the name of the piece, to mark it with a check mark
. Another click in the cell removes selection.
- selection of all the pieces in the list,
- cancel selection of pieces,
- cancel colored selections (errors)
Open the table with “Reference data” of the construction with selection of the button
and make necessary changes in the tabs “Measurement data”, “Increases and constant values”, “Variables”:

Measurement data – values of measurement of a figure, used for construction;
Increases and constant values– increases and constant values for the project;
Variable values – values received by means of calculations (formulas);
· To confirm new data, press the YES button, to cancel changes press the CANCEL button
· Select piece sizes with marking of all sizes/heights with the help of the top switch
, or by means of selection of necessary sizes with a click in the corresponding cells of the table:
The button
allows to clear the table and cancel selection of sizes
· Press the button
to export pieces to “Constructor” program.
· For constant values of the table input manually and not received from the “Size database” (increases etc.) the windows with the “List of missing pieces” for all but basic size are displayed on the screen.

By means of inputting new values (instead of available ones) for each size, you can receive a gradable value (for example, length of the garment input in the table as a constant value). Even if no changes were made, it is compulsory to confirm values for a current size.
When the option is switched off
the window “List of missing data” is not displayed (if it is not necessary to change the table data by size).
· The pieces of selected sizes will be displayed on the screen of “Constructor” program.
FEATURES 1) The pieces are exported as untitled and must be assigned names (the function
”Pieces/ Piece parameters”) in “Constructor” program.
It is not compulsory for the name to match the one in “Designer” program, since an internal number of this piece is used in the program. You can have pieces with the same name from different projects in one model in “Designer” program.
2) The window “Piece parameters” shows the project name and the piece name.

When switching on the parameter
in the export window, such link with the base is lost.
Such pieces are marked with the letter D in the corresponding line of the window “Work with the database”. When a piece is deleted in “Designer” program, this indicator is switched off. When a piece is copied or opened on the screen from a different model, the marking D remains, and when pieces are copied inside a model, it is switched off.
3) The size scale of the working model must match the “Size database” of the project. Correspondence of basic sizes is not compulsory.
The range of sizes in the working model of “Constructor” program should be the same, or less than the range of sizes in the “Size database” of the project in “Designer” program. Otherwise, the following message will be displayed on the screen:

At the same time only one size, not the whole graded piece, will be exported.
This message will also be displayed if the size scales of the project made in “Designer” program and the working model do not match. For example, when a project of standard sizes (Industry Standard, State Standard Specification) is exported to a model with the European scale (34,36,38…). In this case, you need to Set the table for “Size compliance”.
Set the table for «Size compliance»
· Press the ОК button in the message and select the button for size selection
on the top panel of the export window. The table for size compliance is displayed on the screen.
For example, a project with the database of sizes 84 – 120 and heights 158 – 170 must be input in a model with the size range 36 – 48. Select height 164 for export.
· Specify the line with a necessary size/height in “Old sizes” column (it is highlighted), and then select a corresponding cell in the size table of the working model, filling in “New sizes” column. Upon wrong selection of the line, click it again to deselect.

When selection is finished, press the YES button. Switch to the export window is done.
Further operations are similar to those when the size scales of the model and the project comply.
The table commands:
- clear the table;
and
- save and read data from file.
FEATURES
1) When exporting pieces from the project containing widths to the project without it and complete match of sizes, you need to use a working width from the “Reference data” table of the project in “Designer” program.
2) When pieces are exported from the project containing widths to the project containing widths, corresponding widths are exported (regardless of the working width in “Designer” program).
3) If the size ranges are different, you need to select an export width in the Compliance table and select TO WHICH WIDTH of the model it should be changed, with opening of the size tab on the right side in the export window. In this case, it does not matter, which working width is opened on the screen in “Designer” program.

4) “Rewrite” option in the export window allows to export pieces size by size

ATTENTION!!! When ONE size is exported to the screen of “Constructor” program, a working size of “Designer” program is displayed on the screen of “Constructor”. That is why it is important to conform the basic size of the “Constructor” model in and the working size of the “Designer” project (in “Reference data” table
of the export window).

5) When the pieces are input repeatedly from “Designer” program with change in reference data (Measurement data, increases) previously input pieces are automatically reconstructed according to the new data.
6) The pieces are transferred to “Constructor” with constructed seams and modifications (ledge, cuff), if they were created in “Designer”, but only upon the first export. If you modify the seams in “Designer”, the information about the seams made in “Constructor” will be used upon repeated export.
Input of pieces though a digitizer (Digitizing)
Piece digitizing (archiving) is input of pieces in the system through a digitizer. Graphic information about the pieces is transferred with the help of a digitizer to “Constructor” program.
The following tasks can be performed with the help of piece digitizing:
· Digitizing of a separate piece and gradation by means of input of sizes as separate pieces
· Digitizing of an even gradation with equal increments
· Digitizing of an uneven gradation with ranges (leaps) of increments
· Digitizing of an uneven gradation
This description section for digitizing process addresses the following tasks:
2) General order of digitizing
3) Digitizing of a big piece in parts
FEATURES OF DIGITIZING 1) Functional points are not created during digitizing.
2) To select a necessary main contour during digitizing by default, you need to set the contour in the setting “Main contour by default” (text menu points “Settings/ Program parameters”, GENERAL/ Constructor tab)

ATTENTION! On selection of the “Cut” option, two contours are automatically created: the main contour – Working contour, and the derivative the Cut contour copying it, which will be drawn in the layouts.
3) Digitizing of graded piece is only performed by sizes. You can set height increments for pieces in the Increment table (
- “Window/ Show increment table”).
4) Special mode - Autonomous digitizer:
When the digitizing program is launched in a special mode, the buttons “Model” and “Piece” appear on the lower panel of the window for piece archiving. These buttons correspond to the tabs of the window “Work with the database” of “Constructor” program. This way the program for autonomous piece archiving has access to the window “Work with the database” of “Constructor” program, without a right to edit pieces on the screen.
It allows to conduct the digitizing process (and perform a full scale of work with the database of models and pieces) and transfer pieces to “Marker” program, without using “Constructor” program.
Preparation for digitization
To start digitization (archiving) of a piece:
· Switch on the digitizer
· Create a new model or load a previously created model in the window “Work with the database” (
- “Object/ Work with the database”) to input digitized pieces in the model.
· Select the PIECE tab and the button
in the tab
You can also follow the text menu points “Piece/ Input from digitizer”.
The window with the parameters of an archived piece is displayed on the screen
· Fill in the piece parameters: Material, Name, Number of cut pieces
Specify the size and the height of the piece, and specify the type of the main contour being input: Cut or Ready view.
If necessary, change the other piece parameters in this window.
· To confirm data, press the YES button, to cancel input of data, press CANCEL button
The working window for piece archiving is displayed on the screen. The image on the screen reflects the process performed on the digitizer. The current working mode is displayed on the top panel of the window: digitization stage at the current moment. The button panel for digitization operations is displayed in the lower left corner; it corresponds with the template panel of the digitizer commands. When an optical cursor (a special mouse) is moved on the digitizer surface, the cursor cross is moved on the screen.
The button panel commands:
Clear – Clear the digitizer field upon wrong input of a piece.
Close contour – Close the piece contour for exact splicing of the last and the starting input points (to avoid trying to match the starting point when the input of the contour is finished).
Cancel the last point - Delete the last point (or points) input by mistake.
Save – Save a digitized piece in the end of the process.
Continue input – Mode for inputting of the second part of the piece when a piece is digitized in parts.
Input of point marker – Inputting inner contour as a point.
Input of the internal contour – Input of an internal contour for making marks and working lines.
Input by graded piece – Input of points with uneven gradation size by size
Exit – Exit from the archiving window when the process is finished.
The commands from the button panel of the digitizer are set in one of the following ways:
a) Set the optical cursor in the line of a necessary command of the template digitizer menu on the digitizer and click one of the cursor buttons.
b) Select the necessary line of the button archiving menu on the monitor screen with the help of the mouse.
The piece points on the digitizer are read with pressing a corresponding cursor button:
Button 1 - Intermediate points creating shape, which only affect shaping of a curve. Their visibility in the program is switched off;
Double click– Dart of an intermediate type (visible on the screen)
Button 2 – Control (grading) intermediate points;
Double click – dart of a corresponding type
Button 3 - End points (grading points of the contour bend)
Double click – dart of a corresponding type
Button 5 - grain line, and an increment by grading points is read
The digitizers working with “Constructor” automated working place can have different types of cursors, so the buttons can be set under the numbers, different from those indicated in the current description.
General order of digitizing
General order of archiving
1. Archiving always begins with drafting the grain line with the help of the button of the digitizer cursor:
· Set the digitizer cursor at the beginning of the grain line and click once with the button 5
.
· Move the cursor to the end point of the grain line and click the same button. The grain line is visible on the screen in red color and the working mode “Input of piece” is displayed at the top of the window:
2. Input the outer (main) contour of the piece. Input of the contour begins with the button 3
of the end point (the beginning point of the first piece section) and the contour is outlined clockwise.
3. The other points of the outer contour are set in turn, with no return back and double selection of the same point. The digitized sections appear on the screen as they are input from the digitizer. If a point is input by mistake, it can be canceled with the command “Delete the last point”. To input a dart (red squares) double click the button of a corresponding point type.
- To input a straight section, click the button 3-
in the beginning and the end of the section.
- To input a curved section, first set the end point, which determines the section start (button 3-
), then input intermediate points with the buttons 1-
or 2-
: shaping points or control intermediate points. The smoother is the change in the section curve, the less intermediate points are input. The end point (button 3) must be set again at the end of the section.
4. The contour line is finished with the command “Close the contour” on the button panel. That is why the last point of the contour outline (prior to the closing operation) must be specified not far from the starting point of digitization, instead of trying to get to the contour beginning.
5. The mode “Input of an internal point” is displayed in the top line of the archiving window: the contour of the inscription point on the piece. To set this point, move the digitizer cursor to a necessary place on the piece and click with any cursor button. A red point will be displayed on the screen.
This is a minimum set of operations necessary to archive a piece.
6. To save the piece, select the command “Save” on the button panel.
The archiving window is closed, and the window with the piece parameters remains on the screen. To end the process, press CANCEL button and open the piece on the screen from the window “Work with the database”.
Input of inner contours
If a piece has any internal markings, after the described operations (points 1-5) but before saving, do the following:
· Select the command “Input of an inner contour” or “Input of a point marking” on the button panel.
· Input a necessary contour using the same commands and methods as for the main contour.
Point marking (blue color) is an inner contour in the form of a point inside the piece contour.
After selection of the command “Input of a point marking” on the button panel, specify the point inside the piece with any button of the digitizer cursor.
Inner contour (green color) is an inner contour in the form of the lines inside the piece contour. If there are several markings on the piece, it is better to input them as separate contours: Specify the command “Input of an inner contour” on the button panel and input the first marking (for example, of a pocket), then select this command on the panel again and input the following marking (for example, of a dart)
3. Save the digitized piece with selection of the panel button “Save”.
Digitizing of a large piece in parts
When archiving a piece which does not fit the digitizer table, digitization must be performed in the mode “Continue input”. To do so:
· Digitize the first part of the piece fitting the digitizer, without performing the command “Close contour”: input a grain line and an outer contour of the piece (from point 1 to point 2).If necessary, digitize the inner contours without performing the commands “Close contour” and “Input of an inner point” (inscription):
· Move the piece, fitting its second part on the digitizer table (maintaining position of the grain line) and select the command “Continue input” on the button panel.
· Begin digitization of the second part of the piece with input of the grain line, and then point 2, where input of the first part was finished. Finish input in point 3, since point 1 is already in the system. Finish input of the second part with the command “Close contour”, input of the inner point (inscription) and the command “Save”.
Digitization of a graded piece
Digitization of a graded piece can be divided into two types:
1. Standard digitization of a graded piece, where the reference size is input, and the increments in the points are read with the help of a particular key of the digitizer cursor.
2. Digitization of a graded piece by size, when all sizes are input separately, and the pieces are assembled into a gradation later in “Constructor” program.
Standard digitization of a graded piece
In the window of piece parameters, specify the sizes, which will actually be digitized.
The sizes selected for work in the top right corner of the archiving window are highlighted with red.
To digitize a graded piece:
· Input the point of a smaller size with the help of the buttons of the control point (2 -
) or the end (3 -
) point, or double-click the buttons to make a dart.
· Input the increment for this point only in the sizes set in the piece parameters, with the help of the button 5 -
specifying them one by one from a smaller to a larger size (round green points).
The increments are read and divided into a number of intermediate sizes, automatically creating missing sizes, which were not selected in the window fir archiving parameters.
If an increment in the point equals zero, press the buttons 2 -
or 3 -
once.
Intermediate shaping points only affect the curve of the line and are not set by a graded piece.
1. Digitization of an even graded piece with equal increments. To input increments, select any two sizes in the size table (for example, the first and the last size of a graded piece). Other sizes of an even graded piece will be generated.
2. Digitization of a graded piece with leaps in increments. To input increments, select the limits of an increment range (leaps) in the size table: the first and the last size, as well as the sizes, in which the increment changes take place
ADDITIONAL MODE
If while inputting an even graded piece (or one with homogeneous increment leaps for all the points graded), some points are graded absolutely unevenly you need to:
· Digitize the piece up to this graded point
· Specify this point in a smaller size with the cursor button 2 -
or 3 -
· Select the button menu point “Input by graded piece” and perform digitization of this point in the whole graded piece size by size, starting with the second smallest size, with the cursor button 5-
.
3. Digitization of an uneven graded piece. If a graded piece is uneven in all the points, all the sizes should be digitized after their selection in the window of piece parameters.
Digitization of a graded piece by size
To digitize a gradation from the pieces of separate sizes (when storing cardboard pieces of different sizes, etc), all sizes of one piece are input one by one and are automatically assembled into a gradation.
Before input of each new size, select the size of the current digitization in the window with the piece parameters and deselect the previous size. The other piece parameters (material, name) remain unchanged.
ATTENTION! A correct graded piece should contain an equal number of elements (inner contours, sections, points) and the beginning point for digitization must be common. That is why, after work in this mode, it is compulsory to perform “Control of a graded piece” for the piece given. Besides, you can’t select a different main contour for separate sizes in this mode.
Copy pieces from other models
You can copy pieces from ready models or the basic model and perform further operations with the pieces: modeling, creation of arbitrary pieces, etc.
The operation of copying pieces from a different model is performed in the window “Work with the database” (the button
of the vertical screen menu or the text menu points “Object/ Work with the database”).