Constructor:Operations with a point
The functions of the POINT tab allow to move, delete or insert new points in one size, several sizes or all sizes of a piece, depending on the state of the switch for work with graded pieces:
- work with all sizes (moving a point in all sizes).
- work with one piece (moving a point in one size)
- work with several sizes (moving a point in selected sizes).
You can work in shifted coordinates
, and on superposed pieces
Contents
- 1 Input of different values by sizes of a graded nest
- 2 Moving a point
- 3 Aligning a point
- 4 Modifications of a point
- 5 Insert a point
- 5.1 Insert a point arbitrarily
- 5.2 Insert a point at a distance
- 5.3 Divide a section in ratio
- 5.4 Divide a section into N number of parts
- 5.5 Insert a point at a crossing
- 5.6 Insert a point at a circumference crossing
- 5.7 Insert a point along a vertical (horizontal) line
- 5.8 Insert a point at a normal to a line
- 5.9 Insert an extremal point
Input of different values by sizes of a graded nest
To set the values while performing any operations in the program, use a general window for input of data (with different function indications):

- To input a value constant for all sizes, the value must be put in the input line
- To change sign of the input value, press the button
- To input data of the previously saved "Seam algebra" buffer, press the button

- To input different values by sizes manually, press the button
. The window view is changed to:

The size cells are displayed in this maximized window, to input values for the whole graded piece. You can input values manually with clicking the cell with necessary size and height.
When filling in a separate top input line with pressing the button
, this value is transferred to all the cells of the table. When clicking a column with the size or height, only this column or line is filled in. The other methods for quick filling in of the table are described in the "Calculator"section.

The other functions of the window for input of data:
- enter the input values to the "Seam algebra" buffer to use them in the future
[[1]]- save the table data in file
- read the previously saved data from file
- restore the initially set value (the button is only used for some functions)
Moving a point
This panel contains a number of functions, which allow to move the existing points (except the Functional points). Movement can be done both in one size, the whole graded piece, or in some sizes, depending on the setting of the switch for work with graded pieces
.
Correction of fitting, change of point increments, modification of piece contour with the help of different movements of points is done without any actual work with the increment values. You only need to move a point in a certain way in different sizes of a graded piece.
The function for arbitrary movement of a point is transferred to the SECTION tab (the buttons]
).