Constructor:Operations with a point

From Julivi Help
Jump to: navigation, search

The functions of the POINT tab allow to move, delete or insert new points in one size, several sizes or all sizes of a piece, depending on the state of the switch for work with graded pieces:

Embim1414.png- work with all sizes (moving a point in all sizes).

Embim1612.png- work with one piece (moving a point in one size)

Embim1613.png- work with several sizes (moving a point in selected sizes).

You can work in shifted coordinatesEmbim1443.png, and on superposed pieces Embim1615.png


Input of different values by sizes of a graded nest

To set the values while performing any operations in the program, use a general window for input of data (with different function indications):

138.png
  • To input a value constant for all sizes, the value must be put in the input line
  • To change sign of the input value, press the button Embim1617.png
  • To input data of the previously saved "Seam algebra" buffer, press the button Embim1484.png Embim1459.png
  • To input different values by sizes manually, press the button Embim1459.png. The window view is changed to:
140.png

The size cells are displayed in this maximized window, to input values for the whole graded piece. You can input values manually with clicking the cell with necessary size and height.

When filling in a separate top input line with pressing the button Embim1621.png, this value is transferred to all the cells of the table. When clicking a column with the size or height, only this column or line is filled in. The other methods for quick filling in of the table are described in the "Calculator"section.

142.png
  • To return to a minimized window view, press the button Embim1622.png

The other functions of the window for input of data:

Embim1623.png- enter the input values to the "Seam algebra" buffer to use them in the future

[[1]]- save the table data in file

Embim1625.png- read the previously saved data from file

Embim1798.png- restore the initially set value (the button is only used for some functions)

Embim1626.png- clear the table

Moving a point

This panel contains a number of functions, which allow to move the existing points (except the Functional points). Movement can be done both in one size, the whole graded piece, or in some sizes, depending on the setting of the switch for work with graded pieces Embim1414.png .

Correction of fitting, change of point increments, modification of piece contour with the help of different movements of points is done without any actual work with the increment values. You only need to move a point in a certain way in different sizes of a graded piece.

The function for arbitrary movement of a point is transferred to the SECTION tab (the buttons 149.png).

Move a point along X

To move a piece point along the X axis:

  • Select the POINT tab and the button 150.png in the tab. The cursor view is changed to 151.png

You can also follow the text menu points "Point/ Move along Х".

  • Select the area for movement of points: place the cursor next to a point and, while holding down the left mouse button, stretch the selection box to include the point in it. Release the mouse button. The window for input of data will be displayed on the screen:
13.png
  • Set the movement value in the input line. The movement direction is defined along the X axis: to the right - positive value, to the left - negative value.

You can input different values by sizes manually (the botton Embim1459.png), or from the buffer (the button Embim1484.png ).

  • Press the YES button to confirm input of data, press CANCEL to cancel

The function is available in two modes:

1) With selection box: all the points included in the selection box will be moved. They can be points of one piece, or points of two adjacent pieces, or points of superposed pieces.

152.png

2) With a click of the left mouse button: after the function is selected, press and release the <CTRL> key on the keyboard. In this case only one specified point will be moved.

FEATURES


1) The minimum value for moving points is 0.01cm (as well as the minimum distance, for which a point can be moved to an adjacent point).

2) For Intermediate points the function is only applicable upon clicking a point (the option with the <CTRL> key). When using the selection box, the window for input of data will be displayed, but the point will not be moved.

3) Placement of coordinate axes is important. If they are rotated (the button Embim1838.pngon the panel for work with axes) and movement of the point along X and Y is set, the point will be moved in the rotated coordinates.

Moving a point along Y

The function for moving a point along the Y axis (similar to the function «Move a point along Х» 150.png with the difference in the movement direction: up - positive value, down - negative value). The button 155.pngor the text menu points "Point/ Move along Y".

Move a point in direction by

The function allows to shorten (extend) sections along their direction. It is only applicable to End points. To move a point along a section, for which it is an end point:

  • Select the POINT tab and the button 156.png in this tab. The cursor view is changed to 157.png. You can also follow the text menu points "Point/ Move in direction by..."
  • Specify a directing section next to a moved End point (1). The window for input of data is displayed on the screen:
158.png
  • Set the movement value in the input line.

The sign of the value depends on change of the section length upon movement of the point: if the section is extended, the movement value of the point will be positive, if it is shortened, the value will be negative.

You can input values different by size manually (the buttonEmbim1459.png), or from the buffer (the button Embim1484.png).

159.png
  • Press the YES button to confirm input of data, press CANCEL to cancel.

ADDITIONAL MODE


When the mode 160.png sides is on, the input movement value will be divided for two end points of the section.

161.png

FEATURES


1) On small sections, to set an exact movement direction, sufficient image zoom on the screen is necessary, otherwise a different end of the section can be moved


2) It is possible to move end points of unlocked contours - for example, those on the pocket entry line or the contour of the grain line (when the length of the base thread is changed, its slope is saved).

162.png

Move a point along a curve by

The function allows to move a point across the section without changing its curve. It is only applicable to Checkpoints and Intermediate points. The movement value of the point across the section is limited by the distance to its both end points.

To move a point across a curved section:

  • Select the POINT 163.pngtab and the button in this tab. The cursor view is changed to 164.png.You can also follow the text menu points "Point/ Move along a curve by...".
  • Specify the intermediate point. The window for input of data is displayed on the screen:
165.png
  • Set the movement value in the input line

Direction of movement is determined by the principle of the clock direction: moving a point along a section clockwise - plus, counter-clockwise - minus.

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

166.png
  • Press the YES button to confirm data input, press CANCEL to cancel

FEATURES

1) When moving points they can "pass" through other intermediate points of the section, if the distance to these points is less than the movement value.

167.png

These points can match the Functional points. However, if at least in one size of the graded piece a point gets into a Checkpoint or an Intermediate point, it will not be moved. The following message will be displayed on the screen:

168.png

2) AS AN EXCEPTION, this function (like the function "Point/ Set distance" 169.png)

is also applied to the seam, when working with the main contour (Cut). You can measure distance and move points by these values along the seam (to avoid errors in movement of points).

This option is not applicable to points on the seam, which display Functional points of the cut, because movement of these points is subject to the function they perform, not the commands for movement of points.

If the main contour is Finished view, it has no sense to move a point on the Cut.


3) The movement value for points on the seam and the cut for rounded sections is always different, because the movement is done round a circular arc, with its display along a normal. For example, under a certain bend of the section, movement along the seam by 0,1cm causes such a small movement value on the cut ignored by a program, and no movement of the point takes place.

170.png

4) There is no automatic movement of an Intermediate point across the section after the Checkpoint (like in the case of section deformation), because this function does not change the line curve.

171.png

Set a distance

The function allows to set distance between two existing points: one point is fixed, the other one is moved across the section up to the value of the distance set between them, without changing curve of the section. Only Checkpoints and Intermediate points are moved, but any point can be specified as a fixed one. The movement value of the point across the section is limited by the distance to its both end points.

To set distance between two points:

  • Select the POINT tab and the button 169.pngin the tab. The cursor view is changed to 173.png . You can also follow the text menu points "Point/ Set distance".
  • Specify the fixed (1) point, and then the point of the section to be moved (2). The following window is displayed on the screen:
174.png
  • Set the value of necessary distance in the input line.

Only positive value (module) is input; the movement direction for the point along the contour is defined in the program based on actual and desired distance: clockwise or counter-clockwise.

  • To view the actual indention, press the button Embim1459.png. A maximized window is displayed on the screen, where you can view distances, input new values by size manually, or from the buffer with pressing the button Embim1484.png. You can restore an initially set value with pressing the button 50.png.
175.png
  • Press the YES button to confirm input of data, press CANCEL to cancel

The second point is moved along the contour and is set at a specified distance from the first point:

176.png

The specifics of the function are the same as described for the function "Point/ Move along a curve by..." 163.png

Move a point along a normal

The function allows to move a point along the normal with reference to the line it refers to. It is applicable for Checkpoints and Intermediate points.

To move a point along the normal with reference to a line:

  • Select the POINT tab and the button 178.png in the tab. The cursor view is changed to 179.png. You can also follow the text menu points "Point/ Move along the normal".
  • Specify the point. The window for input of data is displayed on the screen:
180.png
  • Set the movement value in the input line. The movement direction is set according to the principle for setting seams: positive value - movement inside the contour, negative value - movement outside the contour.

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

  • Press the YES button to confirm input of data, press CANCEL to cancel.
181.png

The function is used, for example, to move points of the sleeve head to change the fitting value.

FEATURES The command is not applicable to End points of locked contours, but it is applicable to End points of unlocked inner contours (in free points). The movement direction is determined clockwise regarding the start and the end points of the contour.

182.png

Move a point along a tangent

The function allows to move a point along a tangent with reference to the line, where it is set. It is applicable to Checkpoints and Intermediate points. The line shape is deformed when the point is moved.

To move a point along a tangent with reference to a line:

  • Select the POINT tab and the button 183.png in the tab. The cursor view is changed to 184.png. You can also follow the text menu points "Point/ Move along a tangent".
  • Specify the point. The window for input of data is displayed on the screen:
184.png
  • Set the movement value in the input line. The movement direction is defined according to the rule for contour outline: clockwise - positive value; counter-clockwise - negative value.

You can input values different in size manually (the button [[]]), or from the buffer (the button [[]]).

  • Press the YES button to confirm input of data, press CANCEL to cancel
186.png

The specifics of the function are similar to those described for the function "Point / Move along a normal" 178.png

Moving a point along XY

The function allows to move a point for a set distance along coordinate axes with reference to placement of the reference point.

To move a point along the coordinate axis:

  • Select the POINT tab and the button 188.png in the tab. The cursor view is changed to 189.png. You can also follow the text menu points "Point/ Move along XY".
  • Specify the point. The window with movement parameters is displayed on the screen:
190.png
  • Set the movement direction with clicking the buttons with direction arrows. The movement of the point will be visually displayed on the screen (red contour).

The movement value of the point upon one click is defined by the value set in the STEP window.

If the movement value is known, it can be input in the windows DX and DY and press the button Embim1636.png

  • Press the YES button to confirm input of data, press CANCEL to cancel..

FEATURES

1) The movement value is the same for all sizes of a graded piece.

2) The movement path for functional points is not displayed on the screen.

3) The location of coordinate axes is important. If they are rotated (the button Embim1838.png) and movement of the point is set along X and Y, the point will be moved in these rotated coordinates.

Aligning a point

The panel of functions allows to move a point to a necessary position with reference to another point or line.

Align points vertically

The function allows to align several points on the same level along a vertical line.

To align points vertically:

  • Select the POINT tab and the button Embim2093.png in this tab. The cursor view is changed to Embim2094.png . You can also follow the text menu points “Point/ Align vertically”.
  • Specify the fixed (reference) point, then specify the point to be moved.

The point is moved. The action can be repeated for a new pair of points.

Embim1417.png To align several points vertically at once:

  • Specify the fixed point.
  • Specify all the following points to be moved while holding down the <SHIFT> key on the keyboard.

Align points horizontally

The function allows to align several points on the same level along a horizontal line.

Performance is similar to the function “Point/ Align points vertically Embim2093.png”. Use the button Embim2097.png or the text menu points “Point/ Align horizontally”.

Align a point symmetrically

The function allows to align a point symmetrically to another point with reference to a specified line.

To align a point symmetrically:

  • Select the POINT tab and the button Embim2098.png in this tab. The cursor view is changed to Embim2099.png. You can also follow the text menu points “Point/ Align symmetrically”.
  • Specify the fixed point (1), then the symmetry line (2), then the point to be aligned (3)

The point is moved. The action can be repeated if necessary.

Embim2100.png
Embim2101.png


Embim1584.png The function is not applicable to folded pieces (the button Embim2103.png of the screen button menu)

Set coordinates for X, Y and XY

These three functions allow to move a point of any piece contour to the coordinates set with reference to the point, where coordinate axes are set. For example, you need to align a point of the pocket line at a certain distance from the lapel and the bottom of the garment.

  • Display coordinate axes on the screen with the help of the button Embim2104.png , set them in a certain point (1) Embim2105.png
  • Select the POINT tab and the button Embim2106.png in this tab (or the buttons Embim2107.png Embim2108.png, - if you only need to set a point in the coordinates along one axis).
  • Specify the point (2) to be moved to the certain coordinates with reference to the reference point (1). The window for input of data is displayed on the screen


Embim2109.png
  • Set the new coordinates for the point along Х and Y in the corresponding cells of the window.
  • Press the YES button to confirm input of data, press CANCEL to cancel.
Embim2110.png

Embim1584.png

1) You can set different coordinates for the point in different sizes when using the functions Embim2107.png and Embim2108.png manually (the Embim1630.png), or from the buffer (the button Embim2440.png).

2) For these functions location of coordinate axes is important. If they are rotated (the button Embim1838.png ) and movement of the point is set along Х and Y, the point will be moved in these rotated coordinates.

Set a point proportionally

To set a point proportionally between two specified points of the section:

  • Select the POINT tab and the button Embim2117.png in this tab. The cursor view is changed to Embim2118.png.

You can also follow the text menu points “Point/ Set a point proportionally”.

  • Specify the first point of the section (1) in the necessary size of a graded piece.
  • Specify the second point of the section (2) in the same size .
  • Specify the third, aligned point (3) between them in the same size
Embim2119.png


The third point (3) is moved across the section (without deforming it) and is set proportionally between the selected points (considering their increments and placement).

The order of specification of the points does not matter, but the third, aligned point, must be located between any two points of the same section and be a Checkpoint or an Intermediate point. The Functional and End points can only be specified as reference points.

The function can be applied while drafting modeling lines on the piece. For example, a constructor creates a relief line on the yoke from neck to armhole, knowing exact location of the points and the line bend only in one size. With the help of this function, he or she can calculate location of points for other sizes proportional to this (basic or any other) size.

Embim1584.pngCalculation of proportional placement of a point is performed ACCORDING TO THE SIZE, WHICH WAS SPECIFIED while performing this function.

Modifications of a point

Make distance between points equal

The function allows to make distance between two pairs of points equal. To do so:

  • Select the POINT tab and the button Embim2121.png in this tab. The cursor view is changed to Embim2122.png. You can also follow the text menu points “Point/ Make distance equal”.
  • Specify the first (1) and the second (2) points of a standard distance. The program measures distance between the specified points (strictly along a straight line).
  • Specify the fixed point (3) to calculate the changed distance from.
  • Specify the point to be moved(4)
Embim2123.png


  • An inquiry about addition of an extra contour(point mark) in a new place is displayed on the screen.
Embim2124.png
  • Press YES to add a point mark, press NO to perform equalization without making a mark, press CANCEL to cancel the function.

Point 4 is moved along a straight line 3-4 so that length of the section 3-4 will equal the section 1-2.


The function can be used to make equal the distance along the seam (if the main contour is a Working cut) in the sharp angles of piece segmentation (elbow seam of bottom sleeve, angles of front and back relief).

Embim2125.png

The function is applicable to perform equalization of the notch sides. To do so:

Specify the first (1) point of the notch on its model side, and the second (2) point (notch center) for program measurement of the equalizing value.

Specify the central point of the notch again (3): a fixed point to calculate the distance from.

Specify the point to be moved(4): the second point of the notch on the side to make equal

Embim2126.png

Move a point to a point

The function allows to move a point of one section to a point of a different section to give the same shape to the lines or to fix the point in a necessary place of the piece. It can be used with one piece or a group of superposed pieces.

To move a point to a different point of the piece:

  • Select the POINT tab and the button Embim2127.png in this tab. The cursor view is changed to Embim2128.png. You can also follow the text menu points “Point/ Move a point to a point”.
  • Specify the fixed point (1), and then the point of the piece to be moved (2) on any contour
Embim2129.png

The second specified point is moved to the first point. If necessary, the function can be repeated.

Embim1584.png 1) The function is applicable to a group of superposed pieces. To use it:

  • Create a group of pieces with the help of one of the commands for superposing (the Embim1679.png Embim1680.png Embim1681.png Embim1682.pngof the screen menu).
  • Select the POINT tab and the button Embim2127.png in this tab. Perform the function as if working with one piece, but specify the points on different pieces of the group.
Embim2136.png

2) You can work with a part of the piece folded over a line (the button Embim2137.png of the screen menu).

For example, you need to move a point of one part to a model point on a different part to correct the fold:

Embim2138.png

Condition for performance of the function: move the point from the folded part to the point of the working part, not the other way.

Delete a point

The function allows to delete points on any contour of the piece. To do so:

  • Select the POINT tab and the button Embim2139.png in this tab. The cursor view is changed to Embim2140.png. You can also follow the text menu points “Point/Delete”.
  • Specify the point once to delete an intermediate point of any type.

Specify the point twice to delete an End point.

Upon the first click an End point is only “glued” joining two adjacent sections, and takes on view of a Checkpoint. That is why you need to make a second, additional click to delete it.

Embim1584.png If delete a point basic for the point of “Set at distance” type is deleted, this Functional point will be automatically connected with the beginning of a section. Since such a connection was not foreseen, you can change type of the point from Functional to any other.

Insert a point

The function panel allows to add a point of a necessary type on piece sections.

If it is not possible to perform the function (for the commands for finding points of intersections of different types) at least for one size of a graded piece, a message about it is displayed and no point will be put in any size.

Insert a point arbitrarily

The function allows to insert a point in an arbitrary place of a section. To do so:

  • Select the POINT tab and the button Embim2142.png in this tab. The cursor view is changed to Embim2143.png. You can also follow the text menu points “Point/ Insert arbitrarily”.
  • Specify the section in any place where you need to put a point. The following window is displayed on the screen:


110.png


  • Select the necessary type of a point or a notch with clicking the corresponding button.

111.png,112.png - Checkpoint (and a notch). A point, where an increment can be set.

113.png,114.png - Intermediate point (and a notch). It does not hold the shape of a line upon any deformation of a section.

115.png,116.png - Point dividing a section in a ratio (and a notch). Saves the set ratio upon any changes in length and shape of a section.

The last type of a point (117.png,118.png - point set at distance from another point) is blocked, because this Functional point requires a connection to another point, instead of free location on the section.

Embim1584.png Location of a point in different sizes of a graded piece is defined by its relative location on the section of a basic size.

Insert a point at a distance

The function allows to insert a new point at a set distance from a specified point.

To insert a new point at a set distance:

  • Select the POINT tab and the point Embim2154.png in this tab. The cursor view is changed to Embim2155.png. You can also follow the text menu points “Point/ Insert at a distance”.
  • Specify the point, from which you need to measure the distance. The following window is displayed on the screen:


Embim2156.png


  • In the input line, set the distance from the specified point, where a new point will be put

The direction, where the point will be put at distance from the specified point, is determined by the principle of clockwise direction on the piece: clockwise direction – positive value, counter-clockwise direction – negative value.

You can input values different in size manually (the Embim1570.png ), or from the buffer (the button Embim1571.png ).


Embim2159.png


  • Press the YES button to confirm input of data, press CANCEL to cancel.
  • The window for selection of a necessary type of a point is displayed on the screen
110.png

On selection of a functional point of the type “Set from another point at distance” (117.png 118.png), a new point is connected to the reference point. When moving the reference point, the Functional point is automatically moved along the contour, saving the set indention value.

Embim1584.png 1) Points of THE SAME TYPE cannot be put twice in the same place. If a point coincides with another point of the section at least in one size of a graded piece, the point is not added, and the following message is displayed on the screen:

168.png


Functional points are an exception. They can be put over any intermediate points.

2) The minimal distance to put a point from another point is 0.02cm.

Divide a section in ratio

The function allows to put a point on a section dividing it in a set ratio.

To put a point dividing a section in a ratio:

  • Select the POINT tab and the button 200.pngin this tab. The cursor view is changed to 201.png.

You can also follow the text menu points "Point/ Divide a section in ratio"

  • Specify the section. The window for input of data is displayed on the screen:
203.png
  • Set the ratio in the input line (from start of the section in a clockwise direction).

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

  • Press the YES button to confirm input of data, press CANCEL to cancel.
  • Select the type of point.
110.png

The functional point "Dividing a section in ratio" (205.png) will be automatically moved along the contour to keep the set ratio during any deformations of the section.

FEATURES A maximized window for input of data (the button Embim1459.png) is displayed on the yellow background, because the table contains nonlinear values (coefficients). When creating the "Seam algebra" buffer for a given function, the tab type should be considered. To change the tab type from "Linear value" (i.e., length) to "Coefficient", click the right mouse button in any place of the value table. An additional menu is displayed on the screen, where the tab type can be changed with clicking the necessary line:

206.png

If the tab type and the function performed do not match, the following message is displayed on the screen:

Embim2454.png

Divide a section into N number of parts

The function allows to place several points on the section, dividing it into several parts.

To perform the function:

  • Select the POINT tab and the button 208.pngin this tab. The cursor view is changed to 209.png. You can also follow the text menu points "Point/ Divide a section into N number of parts".
  • Specify the section. The window for input of parameters is displayed on the screen:
210.png
  • Set the number of parts and select the type of point in the input line.

Insert a point at a crossing

The function allows to insert a point at the crossing of two lines. To do so:

  • Select the POINT tab and the button 211.pngin this tab. The cursor view is changed to 212.png. You can also follow the text menu points "Point/ Insert a point at crossing".
  • Specify the section to insert a point
  • Specify the section crossing the first section (this crossing does not have to be obvious, but it has to be located on the section).
  • Select the type of a point.
110.png

Insert a point at a circumference crossing

The function allows to insert a point at the crossing of a circumference with a set radius with a line on the piece (an actual circumference does not have to be constructed).

To perform the function:

Select the POINT tab and the button 213.png in this tab. The cursor view is changed to 212.png

You can also follow the text menu points "Point/ Insert a point at crossing with a circumference".

Specify the point (1) (circumference center).

Specify the section (2), to insert a point.

Specify the closest point (3) to the crossing point

A circumference always has two points of crossing with a line (2 and 2Р°), so it is necessary to specify any point of the piece (3) as a direction point to define selection of one of these points:

214.png
  • The window, where you need to input the radius of an imaginary circumference is displayed on the screen:
215.png

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

Press the YES button to confirm input of data, press CANCEL to cancel.

Select the type of a point.

110.png

The function can be used when placement of some element on the piece is defined by two parameters. For example, placement of the pocket top corner is set with the distance from the lapel (this level is set with an auxiliary line) and from the top point of the forepart neck.

216.png

Insert a point along a vertical (horizontal) line

The function allows to insert a new point on an imaginary vertical (horizontal) line from another point.

To insert a new point on an imaginary vertical line from another point:

  • Select the POINT tab and the button 217.png in this tab. The cursor view is changed to 218.png

You can also follow the text menu points "Point/ Insert a point on a vertical (horizontal) line".


  • Specify the point (1), from where an imaginary vertical line will be drawn
  • Specify the section (2) of any contour, where a new point will be inserted.
  • Select the type of a point
110.png
219.png


ADDITIONAL MODE To insert a point on an imaginary horizontal line, press and release the <Ctrl> key on the keyboard after pressing the button 217.png and prior to performing the function.

Insert a point at a normal to a line

The function allows to insert a new point at an imaginary normal from another point. To do so:

  • Select the POINT tab and the button 220.png in the tab. The cursor view is changed to 221.png.

You can also follow the text menu points "Point/ Insert a point at a normal to a line".


  • Specify the point (1), from where a normal will be drawn
  • Specify the section (2) of any contour, where a point will be inserted
222.png
  • Select the type of a point
110.png

Insert an extremal point

The function allows to find the most concave (protuberant) place.

To find a point of extremum:

  • Select the POINT tab and the button 223.png in this tab. The cursor view is changed to 224.png. You can also follow the text menu points "Point/ Insert an extreme point".
  • Specify the section (1) in the area of a supposed point and click the left mouse button.
  • Select the type of a point.
110.png
225.png