Constructor:Working with coordinate axes
Contents
Work with screen axes allows to perform functions in rotated and shifted coordinate system. When grading pieces you can set increments in standard and rotated coordinates.
Besides, it is often necessary to make measurements with the help of coordinate axes on the screen.
The buttons for work with coordinate axes are located in the lower part of the program window:
- open on the screen and delete coordinate axes
- set the beginning of coordinates
- rotate axes by an arbitrary angle
- rotate axes by a set angle and restore axes to normal position.
Open and delete coordinate axes
The lines of coordinate axes are displayed on the screen when selecting the button
on the lower panel (or when following the text menu points “Window/ Coordinate axes/ Show (hide) coordinate axes”).
If axes are not visible, they are beyond the visible area of the screen and you need to click the screen.
Another selection of the given function
hides axes from the screen.
Setting the start of coordinates
Setting an origin of coordinates
The function for moving axes to some point is automatically on upon opening the axes
.
That is why it is enough to specify a point on the piece right after opening the axes.
To anchor axes at a different point of the piece and make it an origin of coordinates:
· Select the button
on the lower panel. The cursor will be changed to
. You can also follow the text menu points “Window/ Coordinate axes/ Set an origin of coordinates”.
· Specify the point.
Rotating coordinate axes
Rotate coordinate axes
To rotate coordinate axis (and for example, set it parallel to the line):
· Select the button
on the lower panel. The cursor will be changed to
. You can also follow the text menu points “Window/ Coordinate axes/ Rotation of coordinate axes”
· Specify the point, which must be crossed by the coordinate axis.
The center of coordinates remains in the same place, while the closest axis will cross the point specified by rotation of the axes.
ADDITIONAL MODE After the function is selected, you can specify the axis and while holding down the left mouse button, drag the cursor across the screen. After setting the necessary rotation of the axes, release the mouse button.
FEATURES If you rotate the axes on the screen and move the center of coordinates to a different point, the angle of axes rotation remains unchanged – the same for all sizes (as in the size, opened on the screen at the moment of performing the function).
Rotate an axis by a set angle and restore to standard position
If the axes are rotated on the screen, the button for axes rotation
looks as follows
(highlighted as “pressed”). After the work with the axes is finished, this button must be switched off, and axes rotation must be equal to 0.
ATTENTION! It is necessary to make sure that once work in a rotated coordinate system is finished, the axis is restored to the standard position. Otherwise, even when visibility of the axes is removed from the screen, the functions will be performed in a shifted coordinate system!
To restore an axis to standard position:
· Select the button
on the lower panel or follow the text menu points “Window/ Coordinate axes/ Set an angle for coordinate axes”.
· The window for setting a rotation angle is displayed on the screen:
· To restore axes to a standard position, select the button
A zero rotation angle will be set, and an axis will be restored to a standard position.
To set a rotation angle, input an angle value in the input window and press the YES button.
Example of work with rotated coordinate axes
To decrease depth of a dart:
1) Open coordinate axes on the screen (
)
2) Set the origin of coordinates in the middle peak point (
)
3) Rotate the Х axis, dragging it through the central point of the dart (
)
4) Move the central point of the dart along the Х axis (
- “Point/ Shift along Х”).
The point is moved along the rotated X axis, not horizontally.
5) Restore axes to normal position with setting axes rotation angle equal to 0 (
)
6) Remove axes from the screen (
)
Work with axes with the help of a mouse
You can do work with axes (rotation, shift) with the help of mouse scroll.
1) Set axes in a point: Click the mouse scroll in a point, holding down the <CTRL> key.
2) Set axes in the end point, tangent to a specified section spot: Click the mouse scroll NEXT to the end point holding down the <CTRL> key
3) Rotate axes: Click the mouse scroll holding down the <ALT> key.
Thus, with the help of the pressed mouse scroll (in the <CTRL> mode) you can set an axis in the end point, or tangent to a section. The axis cannot be set this way in intermediate points.
The ability to set an axes along a tangent can be used when working with the “Increment table” for grading a piece, setting an increment along the necessary section (including curved section).
Cursor coordinates
Three windows for cursor coordinates are located on the lower panel, next to the functions for work with the axes.
Moving the cursor point to a necessary spot on the piece, you can see the following in the cells (left to right): distance projection on the Х axis, on the Y axis, and the distance from the cursor point to the center of the screen coordinates.