Difference between revisions of "Constructor:Operations with a point"
(→Move a point to a point) |
(→Move a point to a point) |
||
| Line 391: | Line 391: | ||
[[File:embim1584.png]] 1) The function is applicable to a group of superposed pieces. To use it: | [[File:embim1584.png]] 1) The function is applicable to a group of superposed pieces. To use it: | ||
| − | * Create a group of pieces with the help of one of the commands for superposing (the [ | + | * Create a group of pieces with the help of one of the commands for superposing (the [[File:embim1679.png]] [[File:embim1680.png]] [[File:embim1681.png]] [[File:embim1682.png]]of the screen menu). |
* Select the POINT tab and the button in this tab. Perform the function as if working with one piece, but specify the points on different pieces of the group. | * Select the POINT tab and the button in this tab. Perform the function as if working with one piece, but specify the points on different pieces of the group. | ||
Revision as of 16:23, 6 March 2015
The functions of the POINT tab allow to move, delete or insert new points in one size, several sizes or all sizes of a piece, depending on the state of the switch for work with graded pieces:
- work with all sizes (moving a point in all sizes).
- work with one piece (moving a point in one size)
- work with several sizes (moving a point in selected sizes).
You can work in shifted coordinates
, and on superposed pieces
Contents
- 1 Input of different values by sizes of a graded nest
- 2 Moving a point
- 3 Aligning a point
- 4 Modifications of a point
- 5 Insert a point
- 5.1 Insert a point arbitrarily
- 5.2 Insert a point at a distance
- 5.3 Divide a section in ratio
- 5.4 Divide a section into N number of parts
- 5.5 Insert a point at a crossing
- 5.6 Insert a point at a circumference crossing
- 5.7 Insert a point along a vertical (horizontal) line
- 5.8 Insert a point at a normal to a line
- 5.9 Insert an extremal point
Input of different values by sizes of a graded nest
To set the values while performing any operations in the program, use a general window for input of data (with different function indications):

- To input a value constant for all sizes, the value must be put in the input line
- To change sign of the input value, press the button
- To input data of the previously saved "Seam algebra" buffer, press the button

- To input different values by sizes manually, press the button
. The window view is changed to:

The size cells are displayed in this maximized window, to input values for the whole graded piece. You can input values manually with clicking the cell with necessary size and height.
When filling in a separate top input line with pressing the button
, this value is transferred to all the cells of the table. When clicking a column with the size or height, only this column or line is filled in. The other methods for quick filling in of the table are described in the "Calculator"section.

The other functions of the window for input of data:
- enter the input values to the "Seam algebra" buffer to use them in the future
[[1]]- save the table data in file
- read the previously saved data from file
- restore the initially set value (the button is only used for some functions)
Moving a point
This panel contains a number of functions, which allow to move the existing points (except the Functional points). Movement can be done both in one size, the whole graded piece, or in some sizes, depending on the setting of the switch for work with graded pieces
.
Correction of fitting, change of point increments, modification of piece contour with the help of different movements of points is done without any actual work with the increment values. You only need to move a point in a certain way in different sizes of a graded piece.
The function for arbitrary movement of a point is transferred to the SECTION tab (the buttons
).
Move a point along X
To move a piece point along the X axis:
You can also follow the text menu points "Point/ Move along Х".
- Select the area for movement of points: place the cursor next to a point and, while holding down the left mouse button, stretch the selection box to include the point in it. Release the mouse button. The window for input of data will be displayed on the screen:

- Set the movement value in the input line. The movement direction is defined along the X axis: to the right - positive value, to the left - negative value.
You can input different values by sizes manually (the botton
), or from the buffer (the button
).
- Press the YES button to confirm input of data, press CANCEL to cancel
The function is available in two modes:
1) With selection box: all the points included in the selection box will be moved. They can be points of one piece, or points of two adjacent pieces, or points of superposed pieces.

2) With a click of the left mouse button: after the function is selected, press and release the <CTRL> key on the keyboard. In this case only one specified point will be moved.
FEATURES
1) The minimum value for moving points is 0.01cm (as well as the minimum distance, for which a point can be moved to an adjacent point).
2) For Intermediate points the function is only applicable upon clicking a point (the option with the <CTRL> key). When using the selection box, the window for input of data will be displayed, but the point will not be moved.
3) Placement of coordinate axes is important. If they are rotated (the button
on the panel for work with axes) and movement of the point along X and Y is set, the point will be moved in the rotated coordinates.
Moving a point along Y
The function for moving a point along the Y axis (similar to the function «Move a point along Х»
with the difference in the movement direction: up - positive value, down - negative value). The button
or the text menu points "Point/ Move along Y".
Move a point in direction by
The function allows to shorten (extend) sections along their direction. It is only applicable to End points. To move a point along a section, for which it is an end point:
- Select the POINT tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points "Point/ Move in direction by..." - Specify a directing section next to a moved End point (1). The window for input of data is displayed on the screen:

- Set the movement value in the input line.
The sign of the value depends on change of the section length upon movement of the point: if the section is extended, the movement value of the point will be positive, if it is shortened, the value will be negative.
You can input values different by size manually (the button
), or from the buffer (the button
).

- Press the YES button to confirm input of data, press CANCEL to cancel.
ADDITIONAL MODE
When the mode
sides is on, the input movement value will be divided for two end points of the section.

FEATURES
1) On small sections, to set an exact movement direction, sufficient image zoom on the screen is necessary, otherwise a different end of the section can be moved
2) It is possible to move end points of unlocked contours - for example, those on the pocket entry line or the contour of the grain line (when the length of the base thread is changed, its slope is saved).

Move a point along a curve by
The function allows to move a point across the section without changing its curve. It is only applicable to Checkpoints and Intermediate points. The movement value of the point across the section is limited by the distance to its both end points.
To move a point across a curved section:
- Select the POINT
tab and the button in this tab. The cursor view is changed to
.You can also follow the text menu points "Point/ Move along a curve by...". - Specify the intermediate point. The window for input of data is displayed on the screen:

- Set the movement value in the input line
Direction of movement is determined by the principle of the clock direction: moving a point along a section clockwise - plus, counter-clockwise - minus.
You can input values different in size manually (the button
), or from the buffer (the button
).

- Press the YES button to confirm data input, press CANCEL to cancel
FEATURES
1) When moving points they can "pass" through other intermediate points of the section, if the distance to these points is less than the movement value.

These points can match the Functional points. However, if at least in one size of the graded piece a point gets into a Checkpoint or an Intermediate point, it will not be moved. The following message will be displayed on the screen:

2) AS AN EXCEPTION, this function (like the function "Point/ Set distance"
)
is also applied to the seam, when working with the main contour (Cut). You can measure distance and move points by these values along the seam (to avoid errors in movement of points).
This option is not applicable to points on the seam, which display Functional points of the cut, because movement of these points is subject to the function they perform, not the commands for movement of points.
If the main contour is Finished view, it has no sense to move a point on the Cut.
3) The movement value for points on the seam and the cut for rounded sections is always different, because the movement is done round a circular arc, with its display along a normal. For example, under a certain bend of the section, movement along the seam by 0,1cm causes such a small movement value on the cut ignored by a program, and no movement of the point takes place.

4) There is no automatic movement of an Intermediate point across the section after the Checkpoint (like in the case of section deformation), because this function does not change the line curve.

Set a distance
The function allows to set distance between two existing points: one point is fixed, the other one is moved across the section up to the value of the distance set between them, without changing curve of the section. Only Checkpoints and Intermediate points are moved, but any point can be specified as a fixed one. The movement value of the point across the section is limited by the distance to its both end points.
To set distance between two points:
- Select the POINT tab and the button
in the tab. The cursor view is changed to
. You can also follow the text menu points "Point/ Set distance". - Specify the fixed (1) point, and then the point of the section to be moved (2). The following window is displayed on the screen:

- Set the value of necessary distance in the input line.
Only positive value (module) is input; the movement direction for the point along the contour is defined in the program based on actual and desired distance: clockwise or counter-clockwise.
- To view the actual indention, press the button
. A maximized window is displayed on the screen, where you can view distances, input new values by size manually, or from the buffer with pressing the button
. You can restore an initially set value with pressing the button
.

- Press the YES button to confirm input of data, press CANCEL to cancel
The second point is moved along the contour and is set at a specified distance from the first point:

The specifics of the function are the same as described for the function "Point/ Move along a curve by..."
Move a point along a normal
The function allows to move a point along the normal with reference to the line it refers to. It is applicable for Checkpoints and Intermediate points.
To move a point along the normal with reference to a line:
- Select the POINT tab and the button
in the tab. The cursor view is changed to
. You can also follow the text menu points "Point/ Move along the normal". - Specify the point. The window for input of data is displayed on the screen:

- Set the movement value in the input line. The movement direction is set according to the principle for setting seams: positive value - movement inside the contour, negative value - movement outside the contour.
You can input values different in size manually (the button
), or from the buffer (the button
).
- Press the YES button to confirm input of data, press CANCEL to cancel.

The function is used, for example, to move points of the sleeve head to change the fitting value.
FEATURES The command is not applicable to End points of locked contours, but it is applicable to End points of unlocked inner contours (in free points). The movement direction is determined clockwise regarding the start and the end points of the contour.

Move a point along a tangent
The function allows to move a point along a tangent with reference to the line, where it is set. It is applicable to Checkpoints and Intermediate points. The line shape is deformed when the point is moved.
To move a point along a tangent with reference to a line:
- Select the POINT tab and the button
in the tab. The cursor view is changed to
. You can also follow the text menu points "Point/ Move along a tangent". - Specify the point. The window for input of data is displayed on the screen:
- Set the movement value in the input line. The movement direction is defined according to the rule for contour outline: clockwise - positive value; counter-clockwise - negative value.
You can input values different in size manually (the button [[]]), or from the buffer (the button [[]]).
- Press the YES button to confirm input of data, press CANCEL to cancel

The specifics of the function are similar to those described for the function "Point / Move along a normal"
Moving a point along XY
The function allows to move a point for a set distance along coordinate axes with reference to placement of the reference point.
To move a point along the coordinate axis:
- Select the POINT tab and the button
in the tab. The cursor view is changed to
. You can also follow the text menu points "Point/ Move along XY". - Specify the point. The window with movement parameters is displayed on the screen:

- Set the movement direction with clicking the buttons with direction arrows. The movement of the point will be visually displayed on the screen (red contour).
The movement value of the point upon one click is defined by the value set in the STEP window.
If the movement value is known, it can be input in the windows DX and DY and press the button
- Press the YES button to confirm input of data, press CANCEL to cancel..
FEATURES
1) The movement value is the same for all sizes of a graded piece.
2) The movement path for functional points is not displayed on the screen.
3) The location of coordinate axes is important. If they are rotated (the button
) and movement of the point is set along X and Y, the point will be moved in these rotated coordinates.
Aligning a point
The panel of functions allows to move a point to a necessary position with reference to another point or line.
Align points vertically
The function allows to align several points on the same level along a vertical line.
To align points vertically:
- Select the POINT tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Point/ Align vertically”. - Specify the fixed (reference) point, then specify the point to be moved.
The point is moved. The action can be repeated for a new pair of points.
To align several points vertically at once:
- Specify the fixed point.
- Specify all the following points to be moved while holding down the <SHIFT> key on the keyboard.
Align points horizontally
The function allows to align several points on the same level along a horizontal line.
Performance is similar to the function “Point/ Align points vertically
”. Use the button
or the text menu points “Point/ Align horizontally”.
Align a point symmetrically
The function allows to align a point symmetrically to another point with reference to a specified line.
To align a point symmetrically:
- Select the POINT tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Point/ Align symmetrically”. - Specify the fixed point (1), then the symmetry line (2), then the point to be aligned (3)
The point is moved. The action can be repeated if necessary.
The function is not applicable to folded pieces (the button
of the screen button menu)
Set coordinates for X, Y and XY
These three functions allow to move a point of any piece contour to the coordinates set with reference to the point, where coordinate axes are set. For example, you need to align a point of the pocket line at a certain distance from the lapel and the bottom of the garment.
- Display coordinate axes on the screen with the help of the button
, set them in a certain point (1) 
- Select the POINT tab and the button
in this tab (or the buttons
, - if you only need to set a point in the coordinates along one axis). - Specify the point (2) to be moved to the certain coordinates with reference to the reference point (1). The window for input of data is displayed on the screen
- Set the new coordinates for the point along Х and Y in the corresponding cells of the window.
- Press the YES button to confirm input of data, press CANCEL to cancel.
1) You can set different coordinates for the point in different sizes when using the functions
and
manually (the
), or from the buffer (the button
).
2) For these functions location of coordinate axes is important. If they are rotated (the button
) and movement of the point is set along Х and Y, the point will be moved in these rotated coordinates.
Set a point proportionally
To set a point proportionally between two specified points of the section:
You can also follow the text menu points “Point/ Set a point proportionally”.
- Specify the first point of the section (1) in the necessary size of a graded piece.
- Specify the second point of the section (2) in the same size .
- Specify the third, aligned point (3) between them in the same size
The third point (3) is moved across the section (without deforming it) and is set proportionally between the selected points (considering their increments and placement).
The order of specification of the points does not matter, but the third, aligned point, must be located between any two points of the same section and be a Checkpoint or an Intermediate point. The Functional and End points can only be specified as reference points.
The function can be applied while drafting modeling lines on the piece. For example, a constructor creates a relief line on the yoke from neck to armhole, knowing exact location of the points and the line bend only in one size. With the help of this function, he or she can calculate location of points for other sizes proportional to this (basic or any other) size.
Calculation of proportional placement of a point is performed ACCORDING TO THE SIZE, WHICH WAS SPECIFIED while performing this function.
Modifications of a point
Make distance between points equal
The function allows to make distance between two pairs of points equal. To do so:
- Select the POINT tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Point/ Make distance equal”. - Specify the first (1) and the second (2) points of a standard distance. The program measures distance between the specified points (strictly along a straight line).
- Specify the fixed point (3) to calculate the changed distance from.
- Specify the point to be moved(4)
- An inquiry about addition of an extra contour(point mark) in a new place is displayed on the screen.
- Press YES to add a point mark, press NO to perform equalization without making a mark, press CANCEL to cancel the function.
Point 4 is moved along a straight line 3-4 so that length of the section 3-4 will equal the section 1-2.
The function can be used to make equal the distance along the seam (if the main contour is a Working cut) in the sharp angles of piece segmentation (elbow seam of bottom sleeve, angles of front and back relief).
The function is applicable to perform equalization of the notch sides. To do so:
Specify the first (1) point of the notch on its model side, and the second (2) point (notch center) for program measurement of the equalizing value.
Specify the central point of the notch again (3): a fixed point to calculate the distance from.
Specify the point to be moved(4): the second point of the notch on the side to make equal
Move a point to a point
The function allows to move a point of one section to a point of a different section to give the same shape to the lines or to fix the point in a necessary place of the piece. It can be used with one piece or a group of superposed pieces.
To move a point to a different point of the piece:
- Select the POINT tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Point/ Move a point to a point”. - Specify the fixed point (1), and then the point of the piece to be moved (2) on any contour
The second specified point is moved to the first point. If necessary, the function can be repeated.
1) The function is applicable to a group of superposed pieces. To use it:
- Create a group of pieces with the help of one of the commands for superposing (the
of the screen menu). - Select the POINT tab and the button in this tab. Perform the function as if working with one piece, but specify the points on different pieces of the group.
2) You can work with a part of the piece folded over a line (the button of the screen menu).
For example, you need to move a point of one part to a model point on a different part to correct the fold:
Condition for performance of the function: move the point from the folded part to the point of the working part, not the other way.









