Difference between revisions of "Constructor:Operations with a point"

From Julivi Help
Jump to: navigation, search
(→‎Align points horizontally)
(→‎Align points horizontally)
Line 282: Line 282:
 
The function allows to align several points on the same level along a horizontal line.  
 
The function allows to align several points on the same level along a horizontal line.  
  
−
Performance is similar to the function “Point/ [mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm Align vertically][mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm ”] . Use the button or the text menu points “Point/ Align horizontally”.
+
Performance is similar to the function “Point/ [mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm [[File:embim2093.png]][mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm ”] . Use the button [[File:embim2097.png]] or the text menu points “Point/ Align horizontally”.
  
 
=== Align a point symmetrically ===  
 
=== Align a point symmetrically ===  

Revision as of 15:25, 6 March 2015

The functions of the POINT tab allow to move, delete or insert new points in one size, several sizes or all sizes of a piece, depending on the state of the switch for work with graded pieces:

Embim1414.png- work with all sizes (moving a point in all sizes).

Embim1612.png- work with one piece (moving a point in one size)

Embim1613.png- work with several sizes (moving a point in selected sizes).

You can work in shifted coordinatesEmbim1443.png, and on superposed pieces Embim1615.png


Input of different values by sizes of a graded nest

To set the values while performing any operations in the program, use a general window for input of data (with different function indications):

138.png
  • To input a value constant for all sizes, the value must be put in the input line
  • To change sign of the input value, press the button Embim1617.png
  • To input data of the previously saved "Seam algebra" buffer, press the button Embim1484.png Embim1459.png
  • To input different values by sizes manually, press the button Embim1459.png. The window view is changed to:
140.png

The size cells are displayed in this maximized window, to input values for the whole graded piece. You can input values manually with clicking the cell with necessary size and height.

When filling in a separate top input line with pressing the button Embim1621.png, this value is transferred to all the cells of the table. When clicking a column with the size or height, only this column or line is filled in. The other methods for quick filling in of the table are described in the "Calculator"section.

142.png
  • To return to a minimized window view, press the button Embim1622.png

The other functions of the window for input of data:

Embim1623.png- enter the input values to the "Seam algebra" buffer to use them in the future

[[1]]- save the table data in file

Embim1625.png- read the previously saved data from file

Embim1798.png- restore the initially set value (the button is only used for some functions)

Embim1626.png- clear the table

Moving a point

This panel contains a number of functions, which allow to move the existing points (except the Functional points). Movement can be done both in one size, the whole graded piece, or in some sizes, depending on the setting of the switch for work with graded pieces Embim1414.png .

Correction of fitting, change of point increments, modification of piece contour with the help of different movements of points is done without any actual work with the increment values. You only need to move a point in a certain way in different sizes of a graded piece.

The function for arbitrary movement of a point is transferred to the SECTION tab (the buttons 149.png).

Move a point along X

To move a piece point along the X axis:

  • Select the POINT tab and the button 150.png in the tab. The cursor view is changed to 151.png

You can also follow the text menu points "Point/ Move along Х".

  • Select the area for movement of points: place the cursor next to a point and, while holding down the left mouse button, stretch the selection box to include the point in it. Release the mouse button. The window for input of data will be displayed on the screen:
13.png
  • Set the movement value in the input line. The movement direction is defined along the X axis: to the right - positive value, to the left - negative value.

You can input different values by sizes manually (the botton Embim1459.png), or from the buffer (the button Embim1484.png ).

  • Press the YES button to confirm input of data, press CANCEL to cancel

The function is available in two modes:

1) With selection box: all the points included in the selection box will be moved. They can be points of one piece, or points of two adjacent pieces, or points of superposed pieces.

152.png

2) With a click of the left mouse button: after the function is selected, press and release the <CTRL> key on the keyboard. In this case only one specified point will be moved.

FEATURES


1) The minimum value for moving points is 0.01cm (as well as the minimum distance, for which a point can be moved to an adjacent point).

2) For Intermediate points the function is only applicable upon clicking a point (the option with the <CTRL> key). When using the selection box, the window for input of data will be displayed, but the point will not be moved.

3) Placement of coordinate axes is important. If they are rotated (the button Embim1838.pngon the panel for work with axes) and movement of the point along X and Y is set, the point will be moved in the rotated coordinates.

Moving a point along Y

The function for moving a point along the Y axis (similar to the function «Move a point along Х» 150.png with the difference in the movement direction: up - positive value, down - negative value). The button 155.pngor the text menu points "Point/ Move along Y".

Move a point in direction by

The function allows to shorten (extend) sections along their direction. It is only applicable to End points. To move a point along a section, for which it is an end point:

  • Select the POINT tab and the button 156.png in this tab. The cursor view is changed to 157.png. You can also follow the text menu points "Point/ Move in direction by..."
  • Specify a directing section next to a moved End point (1). The window for input of data is displayed on the screen:
158.png
  • Set the movement value in the input line.

The sign of the value depends on change of the section length upon movement of the point: if the section is extended, the movement value of the point will be positive, if it is shortened, the value will be negative.

You can input values different by size manually (the buttonEmbim1459.png), or from the buffer (the button Embim1484.png).

159.png
  • Press the YES button to confirm input of data, press CANCEL to cancel.

ADDITIONAL MODE


When the mode 160.png sides is on, the input movement value will be divided for two end points of the section.

161.png

FEATURES


1) On small sections, to set an exact movement direction, sufficient image zoom on the screen is necessary, otherwise a different end of the section can be moved


2) It is possible to move end points of unlocked contours - for example, those on the pocket entry line or the contour of the grain line (when the length of the base thread is changed, its slope is saved).

162.png

Move a point along a curve by

The function allows to move a point across the section without changing its curve. It is only applicable to Checkpoints and Intermediate points. The movement value of the point across the section is limited by the distance to its both end points.

To move a point across a curved section:

  • Select the POINT 163.pngtab and the button in this tab. The cursor view is changed to 164.png.You can also follow the text menu points "Point/ Move along a curve by...".
  • Specify the intermediate point. The window for input of data is displayed on the screen:
165.png
  • Set the movement value in the input line

Direction of movement is determined by the principle of the clock direction: moving a point along a section clockwise - plus, counter-clockwise - minus.

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

166.png
  • Press the YES button to confirm data input, press CANCEL to cancel

FEATURES

1) When moving points they can "pass" through other intermediate points of the section, if the distance to these points is less than the movement value.

167.png

These points can match the Functional points. However, if at least in one size of the graded piece a point gets into a Checkpoint or an Intermediate point, it will not be moved. The following message will be displayed on the screen:

168.png

2) AS AN EXCEPTION, this function (like the function "Point/ Set distance" 169.png)

is also applied to the seam, when working with the main contour (Cut). You can measure distance and move points by these values along the seam (to avoid errors in movement of points).

This option is not applicable to points on the seam, which display Functional points of the cut, because movement of these points is subject to the function they perform, not the commands for movement of points.

If the main contour is Finished view, it has no sense to move a point on the Cut.


3) The movement value for points on the seam and the cut for rounded sections is always different, because the movement is done round a circular arc, with its display along a normal. For example, under a certain bend of the section, movement along the seam by 0,1cm causes such a small movement value on the cut ignored by a program, and no movement of the point takes place.

170.png

4) There is no automatic movement of an Intermediate point across the section after the Checkpoint (like in the case of section deformation), because this function does not change the line curve.

171.png

Set a distance

The function allows to set distance between two existing points: one point is fixed, the other one is moved across the section up to the value of the distance set between them, without changing curve of the section. Only Checkpoints and Intermediate points are moved, but any point can be specified as a fixed one. The movement value of the point across the section is limited by the distance to its both end points.

To set distance between two points:

  • Select the POINT tab and the button 169.pngin the tab. The cursor view is changed to 173.png . You can also follow the text menu points "Point/ Set distance".
  • Specify the fixed (1) point, and then the point of the section to be moved (2). The following window is displayed on the screen:
174.png
  • Set the value of necessary distance in the input line.

Only positive value (module) is input; the movement direction for the point along the contour is defined in the program based on actual and desired distance: clockwise or counter-clockwise.

  • To view the actual indention, press the button Embim1459.png. A maximized window is displayed on the screen, where you can view distances, input new values by size manually, or from the buffer with pressing the button Embim1484.png. You can restore an initially set value with pressing the button 50.png.
175.png
  • Press the YES button to confirm input of data, press CANCEL to cancel

The second point is moved along the contour and is set at a specified distance from the first point:

176.png

The specifics of the function are the same as described for the function "Point/ Move along a curve by..." 163.png

Move a point along a normal

The function allows to move a point along the normal with reference to the line it refers to. It is applicable for Checkpoints and Intermediate points.

To move a point along the normal with reference to a line:

  • Select the POINT tab and the button 178.png in the tab. The cursor view is changed to 179.png. You can also follow the text menu points "Point/ Move along the normal".
  • Specify the point. The window for input of data is displayed on the screen:
180.png
  • Set the movement value in the input line. The movement direction is set according to the principle for setting seams: positive value - movement inside the contour, negative value - movement outside the contour.

You can input values different in size manually (the button Embim1459.png), or from the buffer (the button Embim1484.png).

  • Press the YES button to confirm input of data, press CANCEL to cancel.
181.png

The function is used, for example, to move points of the sleeve head to change the fitting value.

FEATURES The command is not applicable to End points of locked contours, but it is applicable to End points of unlocked inner contours (in free points). The movement direction is determined clockwise regarding the start and the end points of the contour.

182.png

Move a point along a tangent

The function allows to move a point along a tangent with reference to the line, where it is set. It is applicable to Checkpoints and Intermediate points. The line shape is deformed when the point is moved.

To move a point along a tangent with reference to a line:

  • Select the POINT tab and the button 183.png in the tab. The cursor view is changed to 184.png. You can also follow the text menu points "Point/ Move along a tangent".
  • Specify the point. The window for input of data is displayed on the screen:
184.png
  • Set the movement value in the input line. The movement direction is defined according to the rule for contour outline: clockwise - positive value; counter-clockwise - negative value.

You can input values different in size manually (the button [[]]), or from the buffer (the button [[]]).

  • Press the YES button to confirm input of data, press CANCEL to cancel
186.png

The specifics of the function are similar to those described for the function "Point / Move along a normal" 178.png

Moving a point along XY

The function allows to move a point for a set distance along coordinate axes with reference to placement of the reference point.

To move a point along the coordinate axis:

  • Select the POINT tab and the button 188.png in the tab. The cursor view is changed to 189.png. You can also follow the text menu points "Point/ Move along XY".
  • Specify the point. The window with movement parameters is displayed on the screen:
190.png
  • Set the movement direction with clicking the buttons with direction arrows. The movement of the point will be visually displayed on the screen (red contour).

The movement value of the point upon one click is defined by the value set in the STEP window.

If the movement value is known, it can be input in the windows DX and DY and press the button Embim1636.png

  • Press the YES button to confirm input of data, press CANCEL to cancel..

FEATURES

1) The movement value is the same for all sizes of a graded piece.

2) The movement path for functional points is not displayed on the screen.

3) The location of coordinate axes is important. If they are rotated (the button Embim1838.png) and movement of the point is set along X and Y, the point will be moved in these rotated coordinates.

Aligning a point

The panel of functions allows to move a point to a necessary position with reference to another point or line.

Align points vertically

The function allows to align several points on the same level along a vertical line.

To align points vertically:

  • Select the POINT tab and the button Embim2093.png in this tab. The cursor view is changed to Embim2094.png . You can also follow the text menu points “Point/ Align vertically”.
  • Specify the fixed (reference) point, then specify the point to be moved.

The point is moved. The action can be repeated for a new pair of points.

Embim1417.png To align several points vertically at once:

  • Specify the fixed point.
  • Specify all the following points to be moved while holding down the <SHIFT> key on the keyboard.

Align points horizontally

The function allows to align several points on the same level along a horizontal line.

Performance is similar to the function “Point/ [mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm Embim2093.png[mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aunoaaeoue_oiee_aaoeeaeueii.htm ”] . Use the button Embim2097.png or the text menu points “Point/ Align horizontally”.

Align a point symmetrically

Set coordinates for X, Y and XY

Set a point proportionally

Modifications of a point

Make distance between points equal

Move a point to a point

Delete a point

Insert a point

Insert a point arbitrarily

Insert a point at a distance

Divide a section in ratio

Divide a section into N number of parts

Insert a point at a crossing

Insert a point at a circumference crossing

Insert a point along a vertical (horizontal) line

Insert a point at a normal to a line

Insert an extremal point