Difference between revisions of "Constructor:Creating new pieces"

From Julivi Help
Jump to: navigation, search
(→‎General order of archiving)
(→‎Digitizing a large piece in parts)
Line 132: Line 132:
 
=== General order of digitizing ===
 
=== General order of digitizing ===
  
−
=== Digitizing a large piece in parts ===  
+
=== Digitizing of a big piece in parts ===
 +
 
 
=== Digitization of a graded nest ===  
 
=== Digitization of a graded nest ===  
 
==== Standard digitization of a graded nest ====
 
==== Standard digitization of a graded nest ====

Revision as of 19:42, 5 March 2015

Creation of new pieces

There are several ways to create new pieces in a model:

1) Export of pieces from “Designer” program

2) Input of pieces through a digitizer (Digitizing)

3) Copying (and opening) of pieces from other models

4) Conversion of pieces from the formats of other systems (Gerber, Assyst, etc.)

5) Creation of pieces within a model: copying, standard pieces, etc.

6) Creation of pieces with the help of macrocommandsExport of pieces from “Designer” program


Export of pieces from “Designer” program

To export pieces from “Designer” program for creation of base constructions:

·        Create a new model or open a previously created model in the window “Work with the database” (embim1123.png - “Object/ Work with the database”).

·        Select PIECES tab in the horizontal menu and the button in it embim1124.png or follow the text menu points “Piece/Do the project”. The window for selection of a project is displayed on the screen.

·        Select the button for opening projects in “Designer” program embim1125.png on the top panel of the window.

·        Select the group of projects with pressing the button of the drop-down list embim1126.png

embim1127.png

·        Select the project for exporting in “Projects” window with highlighting the line of a necessary construction

embim1128.png

·        Select the pieces of the project in “Pieces” window with clicking the cell before the name of the piece, to mark it with a check mark embim1129.png. Another click in the cell removes selection.

  embim1130.png


embim1131.png- selection of all the pieces in the list, embim1132.png- cancel selection of pieces, embim1133.png- cancel colored selections (errors)

Open the table with “Reference data” of the construction with selection of the button embim1134.pngand make necessary changes in the tabs “Measurement data”, “Increases and constant values”, “Variables”:

 embim1135.png

Measurement data – values of measurement of a figure, used for construction;

Increases and constant values– increases and constant values for the project;

Variable values – values received by means of calculations (formulas);

·        To confirm new data, press the YES button, to cancel changes press the CANCEL button

·        Select piece sizes with marking of all sizes/heights with the help of the top switch embim1136.png, or by means of selection of necessary sizes with a click in the corresponding cells of the table:

embim1137.png

The button embim1138.pngallows to clear the table and cancel selection of sizes

·        Press the button embim1139.pngto export pieces to “Constructor” program.

·        For constant values of the table input manually and not received from the “Size database” (increases etc.) the windows with the “List of missing pieces” for all but basic size are displayed on the screen.

 embim1140.png

By means of inputting new values (instead of available ones) for each size, you can receive a gradable value (for example, length of the garment input in the table as a constant value). Even if no changes were made, it is compulsory to confirm values for a current size.

When the option is switched off embim1141.pngthe window “List of missing data” is not displayed (if it is not necessary to change the table data by size).

·        The pieces of selected sizes will be displayed on the screen of “Constructor” program.

FEATURES 1) The pieces are exported as untitled and must be assigned names (the function embim1143.png”Pieces/ Piece parameters”) in “Constructor” program.

It is not compulsory for the name to match the one in “Designer” program, since an internal number of this piece is used in the program. You can have pieces with the same name from different projects in one model in “Designer” program.

2) The window “Piece parameters” shows the project name and the piece name.

 embim1144.png

When switching on the parameter embim1145.pngin the export window, such link with the base is lost.

Such pieces are marked with the letter D in the corresponding line of the window “Work with the database”. When a piece is deleted in “Designer” program, this indicator is switched off. When a piece is copied or opened on the screen from a different model, the marking D remains, and when pieces are copied inside a model, it is switched off.

3) The size scale of the working model must match the “Size database” of the project. Correspondence of basic sizes is not compulsory.

The range of sizes in the working model of “Constructor” program should be the same, or less than the range of sizes in the “Size database” of the project in “Designer” program. Otherwise, the following message will be displayed on the screen:

 embim1146.png

At the same time only one size, not the whole graded piece, will be exported.

This message will also be displayed if the size scales of the project made in “Designer” program and the working model do not match. For example, when a project of standard sizes (Industry Standard, State Standard Specification) is exported to a model with the European scale (34,36,38…). In this case, you need to Set the table for “Size compliance”.


Set the table for «Size compliance»

·        Press the ОК button in the message and select the button for size selection embim1147.png on the top panel of the export window. The table for size compliance is displayed on the screen.

For example, a project with the database of sizes 84 – 120 and heights 158 – 170 must be input in a model with the size range 36 – 48. Select height 164 for export.

 

·        Specify the line with a necessary size/height in “Old sizes” column (it is highlighted), and then select a corresponding cell in the size table of the working model, filling in “New sizes” column. Upon wrong selection of the line, click it again to deselect.

 embim1148.png

When selection is finished, press the YES button. Switch to the export window is done.

Further operations are similar to those when the size scales of the model and the project comply.

The table commands: embim1149.png- clear the table; embim1150.pngand embim1151.png- save and read data from file.

FEATURES

1) When exporting pieces from the project containing widths to the project without it and complete match of sizes, you need to use a working width from the “Reference data” table of the project in “Designer” program.

2) When pieces are exported from the project containing widths to the project containing widths, corresponding widths are exported (regardless of the working width in “Designer” program).

3) If the size ranges are different, you need to select an export width in the Compliance table and select TO WHICH WIDTH of the model it should be changed, with opening of the size tab on the right side in the export window. In this case, it does not matter, which working width is opened on the screen in “Designer” program.

 embim1153.png

4) “Rewrite” option in the export window allows to export pieces size by size

 embim1154.png

ATTENTION!!! When ONE size is exported to the screen of “Constructor” program, a working size of “Designer” program is displayed on the screen of “Constructor”. That is why it is important to conform the basic size of the “Constructor” model in and the working size of the “Designer” project (in “Reference data” table embim1155.pngof the export window).

 embim1156.png

5) When the pieces are input repeatedly from “Designer” program with change in reference data (Measurement data, increases) previously input pieces are automatically reconstructed according to the new data.

6) The pieces are transferred to “Constructor” with constructed seams and modifications (ledge, cuff), if they were created in “Designer”, but only upon the first export. If you modify the seams in “Designer”, the information about the seams made in “Constructor” will be used upon repeated export.

 

Inputting pieces though digitizer (Digitizing)

Preparation for digitizing

General order of digitizing

Digitizing of a big piece in parts

Digitization of a graded nest

Standard digitization of a graded nest

Digitizing graded nest by size

Coping pieces from other models

Uniform (reference) pieces

Opening pieces from another to the screen

Converting pieces from formats of other systems

Creating new pieces inside a model

piece copy

Standard pieces

Constructing a piece for adhesive

Belt

Stitching

Stitching several pieces

Flounce

Other actions for creating pieces

Save contour as piece

Modeling operations

Copying pieces inside a model in the window "Working with the database"

Creating pieces with the help of macrocommands

Creating piece by input values

Creating a set of pieces as per reference data from the screen