Constructor:Working with groups of lines

From Julivi Help
Jump to: navigation, search

The program allows to create copies of piece lines - Groups of lines, and work with them as with separate pieces. The groups of lines are the second copies of the pieces, which are not displayed in full on the screen. Only specified lines and selected sections of pieces, are displayed on the screen.

The operations performed with the group of lines are repeated on the original piece at the same time, because the groups of lines are sections of the second copies of pieces. Unlike untitled copies, such copies are all changed on the screen at once, since it is a single piece, with a single name in the database

When superposing the lines and the originals of pieces (the buttons embim941.png ), you can use all the program functions. The groups of lines can be used in modeling (for assembling pieces, drawing model lines through a temporarily closed dart). You can also view and correct a dart when it is closed, etc.

To close a dart on the screen you can use regular, untitled piece copies, but any changes made to them are not reflected on the original, and “Reconstruction” process will not be performed.

You can also use the second piece copies (with pressing the screen menu button embim942.png, and holding down the <CTRL> key at the same time, or simply by opening a piece on the screen once again). The changes made in them are also reflected on the original (and the “Reconstruction” process will be performed), but a full piece copy looks bulkier than the lines necessary for work.

Creation of groups of lines

Inclusion of a line in the group

To create a group of lines:

·        Select the button embim943.png in screen functions menu. The cursor will be changed to embim944.png

·        Select the line or the group of lines for work

The lines are displayed on the screen as highlighted with a different color. The order of specifying lines (clockwise, etc does not matter). Screen rotations of selected sections are saved on the lines as well.

·        To create a second, or a third group of lines, select the button embim945.png again

Every new group will be highlighted with a different color.

·        To stop selecting lines, click the right mouse button

After a group of lines is created, it can be used as a regular piece: use the functions for moving and superposition on the screen, shape lines, shift points and contours.

FEATURES 1) For the groups of lines the color settings Pieces (Materials) are used

(“Settings/ Program parameters”, COLOR GAMUT tab).The order of displaying colors on the screen depends on the number of opened pieces and groups of lines. For example, if there are 2 pieces on the screen, the group is opened in color #3.

  embim947.png embim948.png

Besides, when working in the mode “Color gamut – Pieces” (menu points “Settings / Program parameters”, GENERAL/ Constructor tab), it is possible to change the color of lines on the screen with pressing the button embim949.png of the screen menu and specifying the necessary color in the selection window.

2) When copying the lines (embim950.png - “Piece/ Copy”), an untitled copy of the whole piece is created.

3) Visibility of the group is switched off in “Control of a graded piece” window.

4) Any contour type can be selected for the groups (including dotted and pinhole contours), except “Shadow”.

5) If while creation of the lines a previously created group is specified, a group copy is made.

6) The groups of lines are sent to print or plotter when drawing construction pieces.

Delete lines

To delete lines from the screen, select the screen menu button embim951.png - “Window/ Remove from the screen”.

The command embim952.png - “Window/ Remove piece without saving” deletes both all the lines of the group and the original.

To cancel a wrong selection while setting the lines, select the same section of the original piece again, but only while selecting the lines. After selection is performed, it is impossible to exclude a section from the group

ATTENTION! The function for deleting a section (embim953.png - “Section/ Delete”) cannot be used to delete lines or cancel wrong selection. It will delete a section on the original piece.

Examples of work with groups of lines

Screen closure of a dart

To view and correct the dart in a closed state:

·        Select the button embim954.png in the screen functions menu. The cursor will be changed to embim955.png

·        Specify the lines (1, 2, 3) of the part of the dart to be moved

 
embim956.png

 

·        Superpose the sections (the button embim957.png of the screen menu) of the created group of lines with the basic piece, temporarily closing the dart on the screen.

 
embim958.png

 

·        Correct the length of the dart sides and the shape of conjugation sections of the closed dart, with the help of the program functions. For example, with the help of the commands in the SECTION tab: embim959.png “Section/ [[Constructor:Deforming_a_section#Arbitrary_deformation_of_a_section |Arbitrary deformation of a section]]” and embim960.png - “Section/ Spline deformation of a section”

When the lines are deformed, the original piece is also deformed.

·        Ungroup the superposition of the lines and the piece (the button embim961.png of the screen menu)

·        Delete the group of lines from the screen (the screen menu button embim962.png - “Window/ Delete from the screen”).

embim963.png

Drawing modeling lines

You can draw model lines through temporarily closed notches using the groups of lines.

For example, you need to create a yoke on the skirt with closing two notches. To do so:

·        Select the button embim964.png in the screen functions menu. The cursor will be changed to embim965.png

·        Specify the lines of the first group (1а, 2а, 3а) creating the first part of the dart to be closed.

·        Select the button embim966.png again, and create the second part of the dart to be closed (1b, 2b , 3b).

embim967.png

·        Using the functions for screen superposition (the buttonsembim968.png), superpose the piece and the groups of lines in such a way, that notches are closed.

·        Draw the cut line of the yoke with the help of the function embim969.png- “Contour/ Create new”, starting with the original piece (point 1), and then through the points of the groups of lines (2, 3, 4)

 
embim970.png

Fig. Creation of groups of lines for the dart

Fig. Superposition of lines and pieces

Fig. Drawing the yoke line


·        Assemble the yoke piece from the created lines (embim971.png “Piece/ Model/ Assemble piece”)

 

FEATURES The methods for drawing contours on the pieces superposed with the group of lines

 

1)    If a modeling line is needed temporarily (to assemble the piece and delete the modeling line) it can be drafted starting with a point on the original piece and lead through the necessary points of the groups of lines.

embim973.png

Fig. Drawing a line for the yoke

Fig. Remaining contour on the piece

 

When deleting reference modeling lines, “Reconstruction” process will not be performed.

That is why if “Reconstruction” is necessary, all the modeling lines must be saved.

2) If upon creation a modeling line must be automatically transferred to the original piece as “unfolded” (in other words, taking into account temporary closure of a dart or other superposition of a piece and lines), you should draft an arbitrary contour in two stages: first, draft a part of the contour on the main piece, and then on the group of pieces.

For example, you need to draft modeling lines for a figured yoke of the front section of a skirt. To do so:

·        Create a group of lines (1,2,3) with the help of the button embim974.png in screen functions menu.

·        Superpose the sections of the dart of the piece and the group, closing the dart with the help of the command embim975.png ”Window/ Superpose pieces/ Superpose sections of pieces”

embim976.png

Fig. Creation of groups of lines

Fig. Superposition of the group and piece

·        Using the function embim977.png- “Contour/ Create new”, draft the first part of the line (1-2), starting in the point of the piece, not in the point of the group

Deselect the option embim978.png in the window for contour parameters, in order to create the only one line on a piece.

·        Then draft the second part of the line (1-2-3), starting precisely in the point of the group.

 
embim979.png

Fig, 1st stage in creation of contour according to the piece

Fig. 2nd stage in creation of contour according to the line

 

·        The second line is drafted on the group of lines, but it appears on the patter n.

To use it for further assembly, it should be selected to a new group (embim980.png), and superpose with the piece and the first group of lines.

 

Fig. Creation of a line

Fig. Superposition of the line and the piece

  embim981.png

·        Assemble the yoke piece from the lines ( embim982.png “Piece/ Model/ Assemble piece”).

·        Ungroup (embim983.png) and delete the lines from the screen (embim984.png- “Window/ Delete from screen”).

 
embim985.png

Fig. Assembly of the yoke piece and the bottom front piece

Fig. View of the piece with “unfolded” yoke line

 

Unlike the first option for drafting contours, modeling lines remain “unfolded” on the piece for an open dart.

“Reconstruction” option will be applicable, since such modeling lines do not need to be deleted.