Constructor:Working with coordinate axes

From Julivi Help
Revision as of 13:14, 3 March 2015 by Pavel.Gordon (Talk | contribs) (→‎Rotating an axis by a set angle and restoring to the standard position)

Jump to: navigation, search

Work with coordinate axes

Work with screen axes allows to perform functions in rotated and shifted coordinate system. When grading pieces you can set increments in standard and rotated coordinates.

Besides, it is often necessary to make measurements with the help of coordinate axes on the screen.

The buttons for work with coordinate axes are located in the lower part of the program window:

embim1007.png embim1008.png- open on the screen and delete coordinate axes


embim1009.png- set the beginning of coordinates


embim1010.png- rotate axes by an arbitrary angle


embim1011.png- rotate axes by a set angle and restore axes to normal position.

 

Open and delete coordinate axes

The lines of coordinate axes are displayed on the screen when selecting the button embim1012.png on the lower panel (or when following the text menu points “Window/ Coordinate axes/ Show (hide) coordinate axes”).

If axes are not visible, they are beyond the visible area of the screen and you need to click the screen.

Another selection of the given function embim1013.png hides axes from the screen.

 

Setting the start of coordinates

Setting an origin of coordinates

The function for moving axes to some point is automatically on upon opening the axes embim1014.png.

That is why it is enough to specify a point on the piece right after opening the axes.

To anchor axes at a different point of the piece and make it an origin of coordinates:

·        Select the button embim1015.png on the lower panel. The cursor will be changed to embim1016.png. You can also follow the text menu points “Window/ Coordinate axes/ Set an origin of coordinates”.

·        Specify the point.

Rotating coordinate axes

Rotate coordinate axes

To rotate coordinate axis (and for example, set it parallel to the line):

·        Select the button embim1017.png on the lower panel. The cursor will be changed to embim1018.png . You can also follow the text menu points “Window/ Coordinate axes/ Rotation of coordinate axes”

·        Specify the point, which must be crossed by the coordinate axis.

The center of coordinates remains in the same place, while the closest axis will cross the point specified by rotation of the axes.

ADDITIONAL MODE After the function is selected, you can specify the axis and while holding down the left mouse button, drag the cursor across the screen. After setting the necessary rotation of the axes, release the mouse button.

FEATURES If you rotate the axes on the screen and move the center of coordinates to a different point, the angle of axes rotation remains unchanged – the same for all sizes (as in the size, opened on the screen at the moment of performing the function).

Rotate an axis by a set angle and restore to standard position

If the axes are rotated on the screen, the button for axes rotation embim1021.png looks as follows embim1022.png(highlighted as “pressed”). After the work with the axes is finished, this button must be switched off, and axes rotation must be equal to 0.

ATTENTION! It is necessary to make sure that once work in a rotated coordinate system is finished, the axis is restored to the standard position. Otherwise, even when visibility of the axes is removed from the screen, the functions will be performed in a shifted coordinate system!

To restore an axis to standard position:

·        Select the button embim1023.pngon the lower panel or follow the text menu points “Window/ Coordinate axes/ Set an angle for coordinate axes”.

·        The window for setting a rotation angle is displayed on the screen:

embim1024.png

·        To restore axes to a standard position, select the button embim1025.png

A zero rotation angle will be set, and an axis will be restored to a standard position.

To set a rotation angle, input an angle value in the input window and press the YES button.

Example of working with rotated coordinate axes

Working with axes with the help of a mouse

Cursor coordinates