Difference between revisions of "Measurement table:Program Workspace Window and Its Elements"

From Julivi Help
Jump to: navigation, search
(Created page with "__TOC__ The workspace window includes the following elements: 677x470px * Product Data * Measu...")
 
m
Line 23: Line 23:
 
* [[Measurement table:Rounding Mode Panel|Rounding Mode Panel]]
 
* [[Measurement table:Rounding Mode Panel|Rounding Mode Panel]]
  
−
The Menu mostly repeats the functions included to the Main Commands Panel with the only exception for Edit Table-> Copy from Another Model(for this function details click [[copy_measures.htm|here]]).
+
The Menu mostly repeats the functions included to the Main Commands Panel with the only exception for Edit Table-> Copy from Another Model(for this function details click [[Measurement table:Work Algorithm#Copy Other Model Data|here]]).
  
 
= Product Description =
 
= Product Description =
Line 45: Line 45:
 
* Measurement Name field with the current measurement number displayed above;
 
* Measurement Name field with the current measurement number displayed above;
  
−
* Measurement Values field that contains the matrix of values where the columns are located according to the working model sizes in Constructor program, and the lines correspond to heights. Each matrix cell contains the value of the specific measurement corresponding to size-height table. The measurement values are entered either [[enter_measure_values.htm|manually]] each cell or by the [[Measurement table:Read Clipboard Command|measurements results]] in Seams Algebra of Constructor program.
+
* Measurement Values field that contains the matrix of values where the columns are located according to the working model sizes in Constructor program, and the lines correspond to heights. Each matrix cell contains the value of the specific measurement corresponding to size-height table. The measurement values are entered either [[Measurement table:Work Algorithm#Manual Measurements Entry|manually]] each cell or by the [[Measurement table:Read Clipboard Command|measurements results]] in Seams Algebra of Constructor program.
  
 
* Inlays for treatment and looses field.
 
* Inlays for treatment and looses field.
Line 247: Line 247:
 
There is a limitation - you can add, maximum, five pictures to a report.
 
There is a limitation - you can add, maximum, five pictures to a report.
  
−
First, you need to create a [[picture_input_function.htm|Pictures Database]] to select and paste the required pictures from.
+
First, you need to create a [[Measurement table:Work Algorithm#Pictures Database Creation|Pictures Database]] to select and paste the required pictures from.
  
 
Then, you can add the pictures into your report. Just click [[File:en_ptabl_izm_embim56.png|26x25px]] when working in the Program before making the print form - pictures database view window is displayed:
 
Then, you can add the pictures into your report. Just click [[File:en_ptabl_izm_embim56.png|26x25px]] when working in the Program before making the print form - pictures database view window is displayed:

Revision as of 14:26, 30 January 2017

The workspace window includes the following elements:

En ptabl izm embim3.png

  • Table control elements:

The Menu mostly repeats the functions included to the Main Commands Panel with the only exception for Edit Table-> Copy from Another Model(for this function details click here).

Product Description

After the model is loaded into the table, the model code, base height-size are displayed. All the positions of this element may be edited by the user.

En ptabl izm embim4.png

Product Measurement List

Any measurement may be selected here and corresponding measurement values and allowances will be displayed in the measurement table.

En ptabl izm embim5.png

Measurement Table

En ptabl izm embim6.png

The Table includes:

  • Measurement Name field with the current measurement number displayed above;
  • Measurement Values field that contains the matrix of values where the columns are located according to the working model sizes in Constructor program, and the lines correspond to heights. Each matrix cell contains the value of the specific measurement corresponding to size-height table. The measurement values are entered either manually each cell or by the measurements results in Seams Algebra of Constructor program.
  • Inlays for treatment and looses field.
  • Tolerance (negative or positive) field.

The user may edit the information in any of the fields.

Vertical arrows are used for moving up and down the measurements. En ptabl izm embim7.png

Table Type

In the upper right corner of the workspace window of the program, there are the following radio buttons:

En ptabl izm embim8.png

If Plan radio button is selected, the measurement table shall be filled with the parameters that are expected, i. e. planned parameters, or ready measurement tables for a product sent by the customer (in case of export or re-export operations).

Actual radio button is used for real data entering (this is the base mode of operation).

Plan-Actual radio button allows for viewing the difference between actual data and planned or ordered data. This setting may be applied only for the whole measurement table.

Setting Measurement for All Heights or for a Base Height

In the upper right corner of the program workspace window, there are the radio buttons:

En ptabl izm embim9.png

When setting the base height, only one line with the measurements for the base height appears in Measurement Values field; when setting all the heights, the whole heights scale is displayed. Respectively, the measurement table report is printed either with one line only for the base height, or with all the heights of the selected model. Every measurement in the table may be set either for all the heights or for a base height. This information is saved in the table per measurements.

Table Setting for a Product Alone or for a Product and a Piece

In the upper right corner of the program workspace window, below the height table, there are the following radio buttons:

En ptabl izm embim10.png

When the table is set for a product along, the Measurement Values filed has just one value matrix - the one for the product.

When the table is set for a product and a piece, the Measurement Values filed has two matrices - both for the product and for the piece, and each matrix may be filled with separate data set that will be, then, printed in the report.

Respectively, if En ptabl izm embim11.png radio button is selected, the Measurement Values filed will have three matrices: for a product, for a piece and for a cut.

En ptabl izm embim12.png

This setting is acceptable only for the whole measurement table.

For switching between the measurement types, use En ptabl izm embim13.png virtual button above the measurement table.

Main Program Commands Panel

The Panel is displayed as below:

En ptabl izm embim14.png

It includes the virtual buttons for the following functions:

En ptabl izm embim15.png - load model;

En ptabl izm embim16.png - measurement sets for product range groups;

En ptabl izm embim17.png - add new blank entry;

En ptabl izm embim18.png - fill in new entry from the manual;

En ptabl izm embim19.png - read the clipboard;

En ptabl izm embim20.png - delete current entry;

En ptabl izm embim21.png - save current entry;

En ptabl izm embim22.png - save the table;

En ptabl izm embim23.png - enter comments;

En ptabl izm embim24.png - select drawing;

En ptabl izm embim25.png - make a print form (consolidated for the tables specifying pieces and cutting measurements);

En ptabl izm embim26.png - make a print form (only for finished product measurements);

En ptabl izm embim27.png - make a print form (only fir pieces measurements);

En ptabl izm embim28.png - make a print form (only for cutting measurements);

En ptabl izm embim29.png - program settings.

When positioning a cursor on any of these buttons and holding it for several seconds, the pop-up hint with the function description is displayed.

Load Model Command

To load the measurement table for the other model, click En ptabl izm embim30.png in the Main Commands panel of the Main Window. In the window that is displayed.

En ptabl izm embim31.png

select the model from the list by positioning the cursor on it. If it is difficult to search for the necessary model in a big list, enter its code in fast search field located above the list of models. Alternatively, to facilitate the search, you can use Model Selection radio buttons to select the parameters corresponding to your model.

After selecting the model, click Upload and the measurements table for the selected model will be displayed.

Enter basic set of measurement Command

Clicking En ptabl izm embim32.png in the Main Commands panel of the Main Window , you create new typical measurement sets for various product ranges.

En ptabl izm embim33.png

In the list in the upper part of the window, select the product range group. The measurement set for the selected product range is displayed. If the list has not been made yet or you are not happy with the list, you can add new values clicking Add. Measurement Selection from Directory window is displayed. Find the necessary measurement in the list and click Yes.

Clicking Delete, you remove the unnecessary items from the list.

Arrow buttons allow for changing the positions.

Clicking Copy and Insert, you copy the whole list from one range of products and paste it into the other range of products.

When the list is formed, click Fill In. All the measurements from the table will be transferred into the model measurements list.

Add new blank entry Command

If you need to add an item to the measurement table, click En ptabl izm embim34.png in the Main Commands panel of the Main Window. The default setting is to add a new item to the end of the list. To move the item to another position, specify a new sequence number.

Fill in new entry from the manual Command

When clicking En ptabl izm embim35.png in the Main Commands panel of the Main Window, the directory of measurement names is displayed where you can select the pre-entered measurement entry.

In the left window, the names of measurements are displayed, and in the right window, the names of allowances for processing and working out are displayed; in the upper right corner, the allowance value is displayed. Clicking Yes, you enter the selected measurement name.

En ptabl izm embim36.png

This virtual buttons panel is used to navigate in the measurements names directory:

En ptabl izm embim37.png

Arrows are used to move between the items:

En ptabl izm embim38.png — go to the beginning of the measurement names list;

En ptabl izm embim39.png — move one step to the beginning of the list;

En ptabl izm embim40.png — move one step to the end of the list;

En ptabl izm embim41.png — go to the end of the measurement names list.

To add a new entry into the directory, click En ptabl izm embim42.png, enter the necessary information and click En ptabl izm embim43.png to save the new entry.

To remove the selected item from the directory, click En ptabl izm embim44.png.

En ptabl izm embim45.png - selection field. It is used for selecting certain lines of the directory. Enter a key word or phrase here and click the binocular - only the entries containing the key word (or phrase) will be displayed in the list. To view the whole list again, clean the selection field and click the binocular.

Read Clipboard Command

En ptabl izm embim46.png This command is used when it is necessary to transfer some measurement data from Constructor program.

The measurements are made in Seams Algebra section of Constructor program, then measurements results window is displayed and Save to Clipboard and F Tab virtual button is clicked.

En ptabl izm embim47.png

Then go to Measurements Schedule program and click En ptabl izm embim48.png - Read Clipboard. The measurements matrix will be filled with Constructor program data.

Delete current entry Command

Clicking En ptabl izm embim49.png, you delete the selected item from the measurement table if the measurement name, the processing allowance and the allowance value were entered by mistake.

Save current entry Command

Upon clicking En ptabl izm embim50.png, the changes displayed are written into the table.

Save Table Command

When clicking En ptabl izm embim51.png, the current measurement table is written to the general database stored on the server.

Comments Command

Clicking En ptabl izm embim52.png you enter the list of notes and comments to be printed in the document after the measurements table.

Window for entering comments looks as follows:

En ptabl izm embim53.png

To add an new note, enter its number and content into the respective fields in the lower part of the window and click Add.

If you need to correct the note, select it in the table, edit its number or content in the respective fields in the lower part of the window and click Change.

To remove unnecessary note, select it in the table, click Delete and confirm.

Red arrows allow for changing the notes positions.

Clicking Copy, you copy the information from the displayed table into the clipboard.

Clicking Insert, you paste the information from the clipboard into the displayed table. That is, you can copy one model data into the other model.

After entering and/or correcting all the notes, click Save.

Clicking Cancel, you close the window without saving the changes.

Select Drawing Command

En ptabl izm embim54.png This function is used to add a picture into the print form.

Usually, a picture is used for visualization of the measurements indicated in the table.

En ptabl izm embim55.png

There is a limitation - you can add, maximum, five pictures to a report.

First, you need to create a Pictures Database to select and paste the required pictures from.

Then, you can add the pictures into your report. Just click En ptabl izm embim56.png when working in the Program before making the print form - pictures database view window is displayed:

En ptabl izm embim57.png

The right part of the window displays the pictures stored in the database.To view all the pictures, use the virtual button above the pictures:

En ptabl izm embim58.png - go to the first picture.

En ptabl izm embim59.png - previous.

En ptabl izm embim60.png - next.

En ptabl izm embim61.png - go to the last picture.

To select a picture for the report, find the required picture in the right-hand part of the window and click En ptabl izm embim62.png - the picture is moved to the left-hand part. Thus, you can select up to five pictures to be shown in the report, if necessary. If you need to remove a picture from the selected pictures list, click En ptabl izm embim63.png.

To save the pictures of the model, click En ptabl izm embim64.png.

After selecting the required pictures, click ExitEn ptabl izm embim65.png.

Print Command

When clicking En ptabl izm embim66.png , a print form is displayed.

There are three print forms that are set by clicking En ptabl izm embim67.png.

Before printing the table, it shall be saved as only a saved form may be prepared for printing. To pint a table, follow the procedure below.

Click En ptabl izm embim68.png,

orEn ptabl izm embim69.png,

or En ptabl izm embim70.png,

or En ptabl izm embim71.png,

the Measurement Table Print Form is displayed.

En ptabl izm embim72.png

This preview form has a number of window control commands.

When clicking En ptabl izm embim73.png, the list for scale selection is displayed:

En ptabl izm embim74.png

When clicking En ptabl izm embim75.png, Open File window is displayed:

En ptabl izm embim76.png

position the cursor on the file you need and left click it (the file line is highlighted blue), then click En ptabl izm embim77.png, the print form saved before is opened.

When clicking En ptabl izm embim78.png, the window below is displayed:

En ptabl izm embim79.png

in the field pointed with the cursor, enter the file name (model code, object name, etc.) and click En ptabl izm embim80.png. The current print form is saved.

After clicking En ptabl izm embim81.png, the print form is sent for printing. A standard dialog box with print parameters is displayed: printer selection, print range and number of copies.

To close the print form, click En ptabl izm embim82.png.

Program Settings Command

The program configuration is set in Program Parameters window. To open this window, click En ptabl izm embim83.png in the Main Commands panel of the Main Window or select Settings/Program Parameters function in Main Window menu. The following window is displayed:

En ptabl izm embim84.png

In the upper part of the window, there is the main program setting: Database Initialization File Path.

Below, there are control elements allowing for changing some program functions:

En ptabl izm embim85.png Using this panel radio buttons, you determine if the rounding mode panel will be displayed in the workspace window or not.

En ptabl izm embim86.png This panel is used to define the default measurement type at program launching.

En ptabl izm embim87.png This panel is used for changing the text description of size parameters (Chest, Hips, and Waist). For example, when working with Headwear articles, the size parameter is head circumference, therefore instead of Chest parameter enter Head Circumference from the keyboard, Hips parameter may be deleted. After the changes are made, the table will look as follows:

En ptabl izm embim88.png

In Measurement Values field, you may enter 2 values separated with a double vertical line. In such case, the first value will be used for men's range of products and the second - for women's range of products.

In En ptabl izm embim89.png line, you may enter any text to describe the model, such as Materials Group or Range of Products.

En ptabl izm embim90.png Allowance to be automatically added if the user misses the parameter.

En ptabl izm embim91.png Clipboard values accuracy when transmitting from Constructor program.

En ptabl izm embim92.png The first line defining the report header text (with an empty line, the default header is FINISHED PRODUCT MEASUREMENT TABLE (CM)). If you are not happy with this header, enter you own into the first line of the block. The second line is used for entering you own header subject to En ptabl izm embim93.png mode actuation.

En ptabl izm embim94.png This checkbox is used for switching on or off the Pictures mode and Pictures Database Editing mode.

En ptabl izm embim95.png This panel is used for setting offset values (in mm) from the respective paper edges when printing the report.

En ptabl izm embim96.png Paper layout when printing the report.

En ptabl izm embim97.png This block allows the Designer to control the data display in the print form.

En ptabl izm embim98.png - with this checkbox selected and En ptabl izm embim99.png radio button actuated, the measurement difference for both products and pieces will be indicated in the print form.

En ptabl izm embim100.png - This checkbox defines whether the object data will be printed or not.

En ptabl izm embim101.png

En ptabl izm embim102.png If the size range is too big and cannot be inserted into the print form, the table may be divided into two parts: small and big sizes data separately. To do so, select this checkbox. When the print form is created, Select Size/Height Rage for Printing window will be displayed:

En ptabl izm embim103.png

Using arrow En ptabl izm embim104.png, move the sizes to be shown in the print form from Print Sizes window to the adjacent window. The same is applied to the heights.

En ptabl izm embim105.png - This checkbox allows the Designer to enter the comments to the table clicking En ptabl izm embim106.png.

En ptabl izm embim107.png Selection of the measurement table print form type.

En ptabl izm embim108.png These radio buttons are used to select whether object name is displayed in the print form or not.

En ptabl izm embim109.png These parameters define the font size of the headers, table header and measurements values when printed in the report form. The bigger the value, the bigger the font size.

En ptabl izm embim110.png Selecting this checkbox, you define whether Processing and Working Out Allowances column is displayed in the print form or not.

To save the changes in the program settings, click Save.

If you click Apply, the changes will be applied to the program settings only till the program is closed. With a program restart, previous settings will be restored.

Clicking Cancel, you exit the window without saving the changes.

If Database Initialization File Path parameter was changed, restart the program!

Rounding Mode Panel

Rounding Mode Panel is located in the lower part of the program window.

En ptabl izm embim111.png

The program allows for selecting the units of measurement and for rounding the values up to integral units or to tenth.

The panel includes the following rounding options (let's consider the example with rounding up to tenth):

  • Standard - rounding up using standard rules: if the hundredth part is less than 5, the hundredths are simply discarded (for example: 5,24 = 5,2), if it is equal to or more than 5, the tenth are increased by one (for example: 5,26 = 5,3);
  • To smaller - rounding by simple discarding the hundredth parts (for example: 5,26 = 5,2);
  • To larger - rounding by increasing the tenth parts by one (for example: 5,24 = 5,3);