Measurement table:Work Algorithm
Contents
The program may be operated both together with Constructor and in a standalone mode. If you need to transfer some measurements from Seams Algebra of Constructor program to the measurements table, the Constructor program shall be launched, i. e. it is necessary that both programs are operated together.
To start working with a specific model, choose Edit Table ->Load Model or click
in the Main Commands panel and select the desired model.
If the model has not been processed in Measurement Schedule program, its data (object code, object, list of sizes and heights, base size and height, corpulence) are collected from Constructor program. Field
is filled in by the Designer. If the measurement table for the selected model has already been saved in the database, the data will be displayed. All these data may be edited.
The table header - measurements - is filled in (if necessary) manually or using the contextual menu. For more details click here.
It may happen that the current model is very similar to one of those that have been already described, then you may use copy data function. The copied data may be edited and updated.
The table processing algorithm starts from filling in the first name of the measurement. You can fill in Measurement Name, Processing and Working Out Allowances and Allowance fields manually. Alternatively, click
Fill from Directory.
Measurement Values table (matrix) is filled in either manually each cell or by the measurement results in Seams Algebra of Constructor program. In such case, Constructor program shall be launched. In Seams Algebra of Constructor program, the necessary measurements are made and stored in the clipboard. Then, go to Measurement Schedule program and click
- Read Clipboard. The measurement matrix will be filled in with Constructor program data.
After the measurement is filled in using any of the above methods, click
Save Current Item. All the measurements will be saved in the measurements table.
To go to the next measurement name, click
Add New Item and fill it clicking
.
You also can enter the measurements not one by one, but adding a typical list for the selected product range clicking
, and then edit the measurement.
After all the measurements are entered, save the table clicking
.
Add notes to the table, if any, and signature of the Designer.
You may print the table clicking
.
Exit the table clicking either
or
.
Copy Other Model Data
In the Main Window menu, select Edit Table-> Copy from Other Model option.
The window is displayed:
The reference model is selected the same way as when loading model. The radio buttons in the upper right part of the window are used to select if the copied parameters replace the existing parameters or are added to them, and the type of the parameters, actual or planned, to be copied. After the model and copying options are selected, click Copy. Then, in the displayed window
untick the checkboxes for unnecessary data, i. e. leave ticks only in the checkboxes attributed to the data to be copied, and click Next. All the selected information will be copied.
Manual Measurements Entry
In case a measurement has similar value in all the sizes or similar or repeated increments for sizes and heights, you may enter them without Constructor program. In the boxes to the left from the matrix
, enter the values for the base size-height, the size increment (you may enter several values separated with semicolon), click
. The values specified appear in the table. If no increment is specified, i. e. the table is expected to be filled with the same values, the data are entered only to the first box.
When ticking
, you may fill the table with irregular increments by sizes and heights. Holding the left mouse key pressed, select the range of sizes where the increments will be skipped.
In the first box, specify the value for the upper left table cell, in the second box - the size increment, in the third - the height increment, then click
. Go on with the next range of values, if necessary.
In addition, all the values may be entered to the table manually.
Measurement Table Header Filling (Measurements)
Right click above the table of sizes and in the contextual menu displayed select
option. The window where you can select the necessary age-sex group with a standard calculation formula for measurements.
In the formulae, the following variables are used: Size – current size and Corp – current corpulence of a model.
If there isn't the measurement you need in the list, enter the required measurement name and calculation formulae in the panel in the bottom of the window and click
.
To change the existing formulae, select the necessary line in the table, edit the data in the panel in the bottom of the window and click
.
Clicking
, you remove unnecessary lines from the table.
Arrows
help to sort the list of formulae.
Having changed the necessary line, click
to fill in the header (measurements) of the measurement table.
Clicking, you exit the formulae window without changing the measurement table header.
Pictures Database Creation
To create a database of pictures, use the following procedure:
1. Check program settings. Open configuration window by clicking
in the Main Commands panel of the Main Window.
In the window displayed select Pictures Database Editing Mode checkbox, ensure Don't Use Pictures checkbox is not selected, and click Save.
2. In the Main Commands panel click
, Pictures Selection Window is opened:
Click
in the window displayed, pictures entering and editing window is displayed:
Here, you can do the following operation:
- Open file with a picture in .bmp, .emf, .wmf formats.
A standard window of Picture Selection Window is displayed.
Using Document Location element, find and open the folder where the pictures are stored:
Select the desired file by left clicking on it - a picture is displayed in the right-hand part of the window. Click Open.
- open picture file, .jpg, .tif, .gif and other formats. Operations are the same as in the previous item.
- scan new picture (if a scanner is connected).
- choose a scanner if several scanners are used.
- move a picture inside the window (by holding the left mouse key pressed).
- locate the picture in the center.
- return to initial picture size.
- turn the picture 90 degrees clockwise.
- press and hold the right mouse key to select a portion of the picture you want to keep, then click Crop Selected Part.
- this tool becomes active after the previous operation is done.
- save the selected picture for the table directory.
- exit the window without saving the picture.
All the desired pictures are selected and saved in the database following the above procedure.









