Plotter:Program Settings

From Julivi Help
Jump to: navigation, search

The Draftsman Workstation program Settings are added by the service personnel. To open the Settings window, press Ctrl+Alt+F1 together.After pressing these keys, the window with a set of tabs is displayed. The tabs are selected by left-clicking.

En plotter embim120.png

If you need to exit the program Settings without any changes, click En plotter embim121.png.

If you need to save the changes made, click En plotter embim122.png.

The dialog box is displayed where the password is entered by pressing Ctrl+Alt+F12 keys together.

En plotter embim123.png

If the password is accepted, the warning is displayed:

En plotter embim124.png

Then, the program is restarted and new settings become effective.

If the password is not accepted, the message is displayed:

En plotter embim125.png

Re-enter the correct password.

Databases Tab

When Databases tab is selected, the workspace window is as follows:

En plotter embim126.png

Database – the path to the Models Database.

Piece drawing in detail – selection of the pieces drawing database type.

Markers Database/Database type – here the type of the marker drawing database or HP, ISO files are selected.

InterBase

HP file

ISO file

Catalogue with files – the path to the directory with HP or ISO files.

Scale – initial information scale when operating HP or ISO files.

Do not draw text for HP files – the checkbox for selection of either drawing or not the text in HP files.

Server name – the name of the computer where Server Julivi program is installed.

Color Tab

In this tab, you can specify any required number of sets and the color fill of the sets. When Color tab is selected, the workspace window is as follows:

En plotter embim127.png

Each piece set in the marker has its own Color Filling – the color of pieces set in the marker web.

En plotter embim128.gif

To edit the color parameters of the set, select a set in the Color List (position the cursor and left-click on it). Then, using Red, Green and Blue sliders edit the color of the selected set.

If the number of sets is insufficient, you may add a set by clicking Add.

Plotter Tab

When Plotter tab is selected, the workspace window is as follows:

En plotter embim129.png

The list of plotter types is in the left part of the window. Select the appropriate plotter radio button. In the right part of the window the selected plotter type is displayed with all the basic parameter settings required for the accurate plotter operation. After setting all the plotter control parameters, click Ready. In password dialog box, enter Ctrl + Alt + F12.

Frame length – the length of the drawing area that depends on the plotter type.

Selected parameters Exchange Speed and Exchange Control:

Xon/Xof – software exchange control.

DTR – hardware exchange control.

RTS – hardware exchange control.

depend upon the plotter type and COM port of your computer.

Exchange Control and Information Bit depend on the plotter type.

Settings Tab

When Settings tab is selected, the workspace window is as follows:

En plotter embim130.png

Report:

Blanks – for the pieces with the set blank, only the contour of the blank is drawn (in the markers).

Pieces – for the pieces with the set blank, only the contour of the piece is drawn (in the markers).

Blanksand pieces – for the pieces with the set blank, the contour of both the blank and the piece is drawn (in the markers).

Blanksalways, pieces from drawing – for the pieces with the set blank, the contour of the blank is always drawn and the contour of the piece is drawn provided there is a motif (in the markers).

Paper width En plotter embim131.gif(mm) – paper width setting.

Plotter bit gridEn plotter embim132.png – scaling mode setting.

En plotter embim133.pngForm protocol – HPGL file creation (debugging mode).

En plotter embim134.png – path to the HPGL files directory.

Main Pen – the number of the main drawing pen.

Additional Pen – the number of the additional pen (for cutting plotters).

Double markers – drawing of two (three) markers at the same time provided their total width is less than the specified paper width.

En plotter embim135.gif

Between ThemEn plotter embim136.gif(mm) – the distance between the markers in Double Markers mode.

Request for joint detail drawing – request for Double Markers drawing. If this checkbox is selected, the following dialog box appears when the markers queue is drawn:

En plotter embim137.png

If you click Yes, the markers are drawn jointly, if you click No, they are drawn separately.

Rotate marker – the marker is swapped relative to its horizontal axis.

Calibration – drawing of calibration marks spaced 30 cm along the marker length.

Debugging – the data exchange with the plotter is terminated.

Draw Starts – the (right and left) starts of the piece specified in the marker are drawn.

Display fold to full type overlay markers are drawn unfolded. The dialog box is displayed. When clicking Yes, the marker is drawn unfolded, when clicking No, it is drawn plied.

En plotter embim138.png

Create long file names – if this checkbox is not selected, the generated HPGL and ISO files names are limited by 8 symbols.

Draw notches on blanks – transfer the notches from the cuts contours to the blank.

Draw Split Line – used when drawing the markers in two runs if the marker width is bigger than the specified paper width.

En plotter embim139.png

Draw allowances – per marker. If this checkbox is selected, the marker length increases for the required allowance. The marker length allowance is set in the marker program and is drawn in halves in the beginning and in the end of the marker.

Repeat sections – if several sections are specified in the marker program, several sections are used when drawing the overlay in a special mode.

Rotate short markers – marker rotation by 90 degrees if the marker length is smaller than the paper width.

En plotter embim140.png

Don’t Draw the Frame on the Marker – when drawing the marker on a cutting plotter and on a plotter with arbitrary paper winding, the frame is not shown.

Draw defect lines – when drawing the marker on a plotter, the reject lines specified in the Marker program are shown.

En plotter embim141.png

Rotate all the markers 90 degrees – if a marker is wide, and a plotter is narrow, you may select rotation checkbox and the marker will be plotted lengthwise (at the same time, remember to select Draw Split Line checkbox, too).

En plotter embim142.png

Label the fold – the ply legend appears on the pieces in the markers (if the piece in the Marker program is used as the upper or the lower half).

En plotter embim143.png

Pen movement optimization – reduces the number of useless plotter movements (may be selected for all frame plotters).

Text Tab

In this window, all the program settings are shown in plain text format for the program builders’ use only.

En plotter embim144.png

Drawing Tab

In Drawing tab, you can print on plotter the size of a check or strip drawing specified in Marker program by selecting the appropriate checkbox.

En plotter embim145.png

Draw a complete drawing – draw the pattern specified in Marker program (check, vertical strip, horizontal strip) on the whole overlay surface.

check En plotter embim146.gif

Draw on the edge – draw the pattern of the overlay edges at a specified distance.

Size En plotter embim147.gif mm – the pattern drawing width at the overlay edge outside.

check En plotter embim148.gif hor. strip En plotter embim149.gif vert. strip En plotter embim150.gif

Mark points in connection with drawing – when working with the pattern, mark the points where the piece is linked to the pattern (as created in Marker program).

En plotter embim151.png

Pieces Tab

In Pieces tab, the piece legend parameters for pieces in the created schemes and designer markers are selected before sending to the plotter. When Pieces tab is selected, the workspace window is as follows:

En plotter embim152.png

Piece Schemes and Designer’s Markers Drawing – pieces legends.

Model – model No. (10B.)

Piece name – the name of the piece (B.Forepart)

Material – (Top)

Size-Height – (88-164)

Number of pieces – (2 pieces)

Object name – (Jacket)

Optimize the Grainline – drawing of a grainline in the best possible position on a piece.

For Created Schemes – contours to be outlined in the plotter.

Seams

Inner contours

Sights

Text – as created in Constructor program

Pinholes – the pin holes punched by automatic cutting machine

Cut lines – the cut lines for automatic cutting machine

Rotation of text for schemes – flip the piece legend if mirror letters are displayed.

Options for piece labeling – selection of one of the piece legend options

Markers Tab

In this tab, you can specify the desired piece legend parameters for the pieces to be drawn that were created in Constructor and Draftsman Workstation programs, and the legends of the pieces in the marker by selecting En plotter embim153.png the appropriate checkboxes. Similarly, you can specify the marker legend and its location. You can select the grainline location when drawing irrespective of the grainline location on the pieces in Constructor program. When working in this mode, the workspace window is as follows:

En plotter embim154.png

Show the Grainline Only for Markers with Motif and Nap

Do not move grainline by width – if this checkbox is selected, the grainline remains as it is in Constructor program.

Grainline length – selection of the grainline drawing location and length.

From Cut to Cut – the grainline length from a cut to a cut.

Less by ? cm – grainline is stops En plotter embim155.gif cm before the cut lne.

Not more than ? cm – the grainline is not more than En plotter embim156.gif cm.

Together – two above parameters together.

Do not draw – no grainline is drawn on the markers.

Without changes – the grainline is the same as in Constructor program.

Label pieces:

Along inner – using the legend point specified in Constructor program.

Along grainline – legend is located along the grainline.

Main Markers – contours drawing on the pieces in the marker:

Seams – seams drawing.

Inner – internal contours drawing.

Sights – trackers drawing.

Text – draw the text type contour as created in Constructor program.

Pinhole – pin holes drawing for automatic cutting machine.

Cut Lines – the cut lines drawing for automatic cutting machine.

Designer’s – drawing of the piece contours in markers for the designer:

Seams – seams drawing.

Inner – internal contours drawing.

Sights – trackers drawing.

Text – draw the text type contour as created in Constructor program.

Pinhole – pin holes drawing for automatic cutting machine.

Cut Lines – the cut lines drawing for automatic cutting machine.

Pinhole size – drawing of a pin hole size in mm.

Pieces Legend in the Marker:

Model – the model code.

Name – the name of the object.

Size – the size of the set.

Height – the height of the set.

Short name – the short name of the piece, if any.

Specification code – the piece number by the specification.

Full piece name – the full name of the piece.

Model and material if more than one – indication of the model code if there is more than one model; indication of the material if more than one material is used in the marker.

Set code – the code of the set (A,B…) if the marker includes N identical sets.

Through Name – the pieces of each set are identified using a letter (A, B, C…) irrespective of the sets repetition.

Vertically – legends arrangement either along the horizontal or vertical line.

Material – the name of the material.

Dimensions – the piece length and width.

Spacer – between the parameters when the information is displayed in a line En plotter embim157.png.

Optimize label location – inside the piece contour.

Minimal letter size – minimum size of the piece legend characters.En plotter embim158.png

Row rotation – mirror the characters of a piece legend and overlay legend.

Marker Legend:

Display the Marker Legend – the marker legend is displayed either bottom-up or top-down (along the horizontal line).

Material – the name of the material.

Marker name

Model code – for the markers with one model.

Model name – for the markers with one model.

Drawing – repeated motif parameters.

Length and Width – the size of the overlay.

Notes – the marker description.

Drawing Time – date and time the drawing was finished.

Order Name – the order No.

Overlay Type – the type of the cloth overlay, shorted form.

Sets – the number of the identical sets.

Size/Height – size and height for each set.

Repeat Sets – code of the model in the marker considering repetitions.

Set Model Code – code of the set model in the marker.

Label HPGL and ISO files – signing of the markers when working with HPGL and ISO files.

Label Marker – location of the marker signature:

Behind the Overlay at the Top

Behind the Overlay at the Bottom

In Front of the Overlay at the Top

In Front of the Overlay at the Bottom

In the Beginning of the Overlay at the Top

In the End of the Overlay at the Top

In the Beginning of the Overlay at the Bottom

In the End of the Overlay at the Bottom

Drawing Accuracy – the piecewise-linear approximation deviation from the spline (the lower the accuracy, the faster the plotting).

Screen Tab

In Screen tab, the default markers sorting parameters for the Draftsman Workstation program are specified. To choose the needed parameter, select the appropriate radio button En plotter embim159.png.

En plotter embim160.png

Basic sorting:

By dates – by the date of the marker creation.

By all models – by the name of the model from the general list.

By assortment – by the range of the products.

By Object Name – by the object name.

By order – by the orders used.

By model name – by the model name.

By Cutting Statements – by the statements of cutting operations.

Orders sorting:

By dates – by the date of the order creation.

By names – by the order No.

Generate names – when the markers are sorted either by model, by product range, by name or by order, a new name is generated in the markers list instead of the marker name.

This name includes:

The list of sizes and heights of the laid sets indicating (in brackets) the number of the repeated sets.

The marker width.

Shorted designation of the cloth type.

En plotter embim161.png

With Generate names radio button selected, the selected sorting method for the marker name list is activated.

Sort marker:

By names – by the whole newly generated name.

By sizes – by sizes and heights.

By widths – by the marker width.

Show orders within last – the appropriate number of days is specified.

Show the Last Designer’s Drawings – the number of pieces is specified.

Time of creating piece scheme – the time of creation is specified.

Show markers within last – in the markers sorting mode, the markers created during the last N days are displayed in the By date list.

General Tab

When working in this mode, the workspace window is as follows:

En plotter embim162.png

Notches Length – in 0.01 mm.

Notches Width – in 0.01 mm. The box becomes active when one of the Notch Type radio buttons: Line, Triangle, T-Shaped, U-Shaped is selected.

Width Deviation – the drawing area deviation by width relative to the reference point (cm).

Letter size – font height (mm).

Distance between lines – pieces legends (mm).

Distance between symbols – in the legend line (mm).

If the pieces drawn on the plotter do not correspond to their dimensions, i. e. their length and width, the drawing width and/or length factor shall be adjusted. The drawing factor may depend on the paper thickness and on the paper slipping ratio (i. e. when the paper is change, check the piece and, if necessary, correct the length and width).

Correction by length – length drawing factor.

Correctionby width – width drawing factor.

Reference Line – the reference line is shown at a set distance from the cut inside the piece (mm).

Between the Markers (mm) – the distance between the markers, by the drawing length.

Notches type on the marker – selection of the notches type: Line, Triangle, T-Shaped, U-Shaped.

Notches for the Designer’s Pieces – selection of the fixes type: Line, Triangle, T-Shaped, U-Shaped.

Cut-Through – only for the cutting plotter. These are created to hold the piece when cutting and to prevent from its getting under the knife when moving.

Size – the distance between the cut lines.

Distance – the cut line length.

Draw notches – if this checkbox is selected, the notches are drawn; if this checkbox is not selected, the notches are cut.

Exchange Protocol – service function. For service personnel’s use.

Drawn edge (cm) – the fillet drawing at the edges of the overlay at a specified distance.

Program Header – the program window header.

Drawing symbols in line – selection of the symbols drawing type depending on the plotter type.

Minimize task - selection of the task reduction location: To the Toolbar or to the Sys Tray.