Design:Working with the screen (for operations with a drawing)

From Julivi Help
Jump to: navigation, search

The commands for work with the screen (the left-side button menu) are divided into two groups:

commands of work at the drawing ( design137.png), and commands of work at ready pieces (design138.png).

Disabled command buttons are not relevant for working in this mode.

There are commands (Zoom, Contours Visibility, etc.) that work in both modes. Described below are the commands used in the Work at the Drawing mode.

Zooming an Image

While working with a project on the screen, we have to change the image scale. Such actions are preformed with the help of a group of zooming commands on the button bar:

design139.png

These functions can also be performed through the use of the so-called “Hot” keys, that is, the respective keys of the keyboard. These functions are described separately.

«Microscope»

“Zoom”


Use the “Zoom” function to view a certain screen area zoomed in. For this purpose you have to:

  • Fulfill the “Screen / Microscope” menu item or choose the design140.pngcommand in the button menu. The cursor will look likedesign141.png.
  • Move the cursor intersection in the screen to an imagined angle of the screen area you want to zoom in.
  • Still holding down the left button, move the cursor on the screen. Upon that, the required screen area will be selected with a rectangular frame.
  • Release the mouse button after the part of the screen you want to view has been selected.

Show all on the screen

After fulfilling the “Screen / Show All” menu item or choosing the design142.png command in the button menu, you can see the entire drawing or all the pieces in the screen scale.

Return to previous scale

After the image scale has been changed, you can return to the previous variant. For that purpose, fulfill the “Screen / Return Scale” menu items, or choose thedesign143.png button.

Zoom out

To zoom out gradually, choose the design144.png button, or the “Screen /Zoom Out” menu item. The image size will continue reducing every time the button is pressed.

Zoom in

To zoom in gradually, choose thedesign145.png button, or the “Screen / Zoom In” menu item. The image size will continue increasing every time the button is pressed.

The second method of performing the “Zoom Out” and “Zoom In” functions for the image:

For a mouse with a central scroll wheel: - when the wheel is rotated up, the size of the image around the cursor is reducing; - when the wheel is rotated down, the size of the image around the cursor is increased. This operation is performed simultaneously with the work of other commands: you can use the scroll wheel without the need to stop performing the current command.

Move an Image

If you want to move an image on the screen, perform the following actions:

  • Fulfill the “Screen / Move Image” menu item or perform the design146.pngcommand in the button menu. The cursor will look like design147.png.
  • Point the cursor intersection at any element of the screen and, holding down the mouse button, move the image to the required place on the screen, and then release the mouse button.


The second method of performing this function: For a mouse with a central scroll wheel, -

If you press and hold the wheel, the function of moving the image will be performed;

This operation is performed simultaneously with the work of other commands: you can use the scroll wheel without the need to stop performing the current command.

Operations with Axes

The design148.pngcommand block of the left-side button menu is used for working with coordinate axes on the screen.

  • To display the axes on the screen, choose the design149.pngbutton or fulfill the “Screen / Show / Remove Coordinate Axes” menu items. Then the coordinate axes will be set in a random place of the screen.
  • To set the origin of coordinates into the required point of the screen, choose the design150.pngbutton or fulfill the “Screen / Move the Coordinate Axes into Point” menu items. The cursor will look like design151.png. Click the left mouse button to place the cursor intersection into any required point of the screen or construction element.
  • To rotate a coordinate axis along some line or by an arbitrary angle, choose the design152.pngbutton or fulfill the “Screen / Rotation of Coordinate Axes” menu items. Then the cursor will look like design153.png. Holding the left mouse button, move the X or Y axis line, placing it into the required point or line, and then release the left mouse button.


  • To place the axis into the standard position (angle of 0), to rotate the axis by a defined angle, or to view the angle that the axis was rotated by the “Rotation of Axes” command, you have to fulfill the “Screen / Set Coordinate Axes Angle” menu item or choose the design154.pngbutton. Then a dialog box will be displayed on the screen, where the angle value of the angle rotation is specified (if it was rotated):
design155.png


- After viewing the rotation angle value, press the design156.pngbutton if you need only the information about the angle value. In this case, the axis will remain on the screen unchanged.

- You can enter the axis turn value (45) manually and press the design157.pngbutton.

- You can set the axis into the standard position after the turns by choosing the design158.pngbutton.


  • During the work you can use the cursor coordinates line in the lower right corner of the screen:


design159.png

After calling up the axes onto the screen and placing them into the desired point you can move the cursor arrowhead to the required point of the screen as precisely as possible and, without moving the mouse, find the value:

The first cell shows the Х coordinate value,

The second one shows the Y coordinate value,

The third one shows the straight-line distance from the center of coordinates to the arrowhead.

Clearing the Screen

To clear the screen from temporary selections and “trash”, choose the design160.png button or fulfill the “Screen / Redraw Screen” menu item.

«Rollback» (Cancel Command)

The “Rollback” function allows you to perform step-by-step cancellation of actions from the last work stage to the level of saving into the base. To perform a rollback, do the following:

  • Choose the design161.pngbutton or fulfill the “Project / Cancel a Command” menu items.

When the algorithm is corrected in the “Program Checkout” window (the design162.pngbutton), while being at a certain stage in the middle of the algorithm and performing operations of deleting or replacing an operator, you can cancel an erroneous action. During rollback, the actions of algorithm correction in the middle of the text will be canceled one-by one, and then, as usual, the last commands will be canceled from bottom to top.

When the project is saved into the database (the design163.pngbutton or the “Project / Save” text menu items) the “Rollback” button will be disabled.

Cancellation of “Rollback” (Undo Command)

If “rollback” was performed by mistake, but the project has not yet been saved in the base, you should use the “Rollback” cancellation function. For this purpose, do the following:

  • Choose the design164.pngbutton or fulfill the “Project / Redo a Command” menu items.

The design165.pngbutton becomes active after the first rollback is performed, and enables you to cancel the “Rollback” by redoing its action.

For both the “Rollback” buttons to become disabled again, perform the “Saving into Database” operation (the design166.pngbutton or the “Project / Save” menu items).

Visibility of Various Drawing Elements on the Screen

When there is much visual information on the screen, it can be difficult to figure it out: there are many contours, lines, points, names of lines and points, and so on. There are situations when you need to indicate a certain line for performing a function, but it becomes superimposed on another one. To correct such problems there is a possibility to disable visibility of some contours, lines, points, etc. on the screen.

In the button menu there is a group of buttons meant for working with visibility of construction elements. There are all types of drawing elements represented on these buttons.

design167.png

Successively from left to right, from top to bottom:

1) circles, 2) arcs, 3) curved lines, 4) points, 5) names of points, 6) contours (cuts, inner contours, grains), 7) intervals, 8) straight lines, 9) names of lines,10) elements of basic net, 11) explanatory text.


A button with the image of a construction element allows you to disable its visibility by clicking the left mouse button. The selected element is not cleared from the screen but becomes invisible.

If visibility of an element is disabled, it will not be drawn when the drawing or pieces are printed out on the printer and plotter.

ATTENTION! Do not forget to enable visibility of the element again (by a left-click on the relevant button), otherwise you will not be able to continue working with it.


Screen Shifts (for the Drawing)

In the left-side button menu there is the commands block for screen shifts. They are meant for checking of matching and line configurations between the drawing elements.

These operations are of screen nature, therefore actions performed with the pieces do not impact on their actual state and position on the screen. In fact, they are screen copies of the selected objects (pieces, their parts, and lines) that are displayed on the screen.

In the regular working mode of the program all the commands of screen shifts are disabled, except the command for selecting the required objects for matching, and after choosing the design179.pngbutton, the commands become functional:

design180.pngdesign181.png

Select a Line(s)

In order to perform screen shift on a drawing, you have to select a line or a group of lines.

To select lines, do the following:

  • Press the design183.pngbutton. Then the cursor will look likedesign184.png
  • Select a line or a group of lines, which have to be modified (at that, the selected objects are highlighted in color.) For this, do the following:

Variant 1:

Indicate the required lines one by one by clicking the left mouse button. If a line is selected by mistake, the selection and highlighting in color will disappear after a repeated click on the same line.

Variant 2:

Press and hold the SHIFT key on the keyboard, then seize the group of lines into a frame while holding the left mouse button. After releasing the SHIFT key you can deselect the non-required lines, pointing the cursor at them and clicking the left mouse button.

  • Click the right mouse button after you have selected the lines.
  • In order to create new groups for matching them to one another, repeat this whole process, with other elements already.


Each new group will be colored with a different color. If groups are matched to one another, the group being shifted will acquire the color of the stationary group, and then these groups become an integrated coupling (group) already.


Special feature

The colors of groups on the screen are set in the “Pieces Group” field of the design185.pngconfiguration window.

design186.png


Here the desired colors for the first 20 groups are assigned, and the 21st group will be colored with the 1st group’s color. To set the color, click the left mouse button on the square of the color that needs to be changed. At that, the screen for setting colors will be displayed, where you have to choose the required color and press the ОК button.


  • After viewing the matching (or making adjustments, as will be described below), you need to deselect the groups. To do so, press the design187.pngbutton, and point the cursor intersection at the group to be deleted. If it is only one, it will be deleted automatically.

At that, screen copies disappear, and changes in the original pieces remain.


  • To cancel each matching and return the actions with the given group one step back, choose the design188.pngbutton of the left-side button menu and indicate a certain group.

It is after performing some command that the button becomes active.


For example, a project of a jacket (Fig.1) is displayed on the screen:


design189.png
Fig.1



  • Using the design190.pngbutton (as described above), select the scye line (1) and the shoulder line (2) in the front drawing – see Fig.1a.
  • Click the right mouse button to stop selecting lines.

The selected line(s) will be highlighted in color.

This is the first group for screen matching.

design191.png

Fig. 1a

  • Using the design192.pngbutton (as described above), select the lines of shoulder (3), scye (4) and scye dart (5) in the back drawing – see Fig.1b.
  • Click the right mouse button to stop selecting lines.

The selected line(s) will be highlighted in a different color.

This is the second group for screen matching

design193.png


Fig. 1b

Screen Moving

The command block situated in the left-side button menu of the program is used to work with moving of pieces: design194_1.png

Arbitrary Moving

If the drawing is overloaded, you can move the selected group into an unfilled area of the screen.

For this purpose, do the following:

  • Select the lines, as described above.
  • Press the design194.pngbutton. Then the cursor will look like design195.png.
  • Set the cursor intersection at a line or a point of a group and, holding the left mouse button, move the group arbitrarily into the required area of the screen.
  • Release the left mouse button, and this move will be fixed.
  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
design196.png

Rotation by 90 Degrees

To rotate the selected lines by 90 degrees, do the following:


  • Select the lines as described above.
  • Press thedesign197.png button. Then the cursor will look likedesign198.png.
  • Set the cursor intersection at a line or a point of a group and click the left mouse button. Then the group will be rotated by 90 degrees clockwise. Each new click of the mouse will continue rotating the object clockwise.
  • You can continue working with this command, pointing the cursor at an element of another group.
  • To quit the command, press the right mouse button.
  • For step-by-step cancellation of actions with the given group, select the design199.pngbutton and point the cursor intersection at this group.


design200.png

Arbitrary Rotation

To rotate the selected lines by an arbitrary angle, do the following:


  • Select the lines as described above.
  • Press the design201.pngbutton. Then the cursor will look likedesign202.png.
  • Set the cursor intersection into the center of rotation – point (1) of the group – and click the left mouse button on it.
  • Point the cursor at any element of the group at the point or line (2) and, still holding the left mouse button, rotate the group arbitrarily by the desired angle.
  • Release the left mouse button. This rotation will be fixed.
  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, select the design203.pngbutton and point the cursor intersection at this group.
design204.png

Mirror

To mirror the selected lines, do the following:


  • Select the lines as described above.
  • Press the design205.pngbutton. Then the cursor will look likedesign206.png.
  • Click the left mouse button on one of the sections of the group being rotated. A window containing variants of rotation will be displayed:

design207.png

  • Choose the button of vertical design208.pngor horizontal design209.pngflip by clicking the left mouse button on it. (The third variant of rotation design210.pngis disabled for the drawing)

As the result, the group will be flipped.


For a vertical flip (Fig.1) and a horizontal flip (Fig.2) it does not matter, which exactly line or point you specify, because the flip will be performed about the center of the piece.

design211.png

Fig.1 Fig.2

  • You can continue working with this command, pointing the cursor at an element of another group.
  • To cancel quitting the rotation query window, choose the Cancel button.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design212.pngbutton and point the cursor intersection at this group.

Fold a Piece

To rotate the selected lines about a bending line, do the following:

  • Select the lines as described above.
  • Press the design213.pngbutton. Then the cursor will look likedesign214.png.
  • Set the cursor on the Folding line (1), then on the point of the group that is being Folded t (2).

At that, the group will be Folded in the point (2) about the bending line.

  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design215.pngbutton and point the cursor intersection at this group.
design216.png

Restore a Piece to Initial State

To return the lines to their original state after screen operations, do the following:

  • Press the design217.pngbutton. Then the cursor will look likedesign218.png.
  • Set the cursor intersection at any element of the group. Then the object will be returned to its original state provided that it has been changed.

If several groups were matched to one another, first they will be disconnected in turn, acquiring their initial color, and the last stage will be their return to the original positions on the drawing.

  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.

Screen Overlapping

Except the commands of moving, there are also commands of screen overlapping in the left-side button menu, used for working with selected groups:

design219.png

Overlapping Points of Pieces

To overlap a point of a line or of a group of selected line into a certain point, do the following:

  • Select the lines as described above.
  • Press the design220.pngbutton. Then the cursor will look like design221.png.
  • Indicate a stationary point (1), into which the overlapping will be performed.

The stationary point can either belong to a certain selected group, or not belong.

  • Specify the point to be moved (2) (a point that necessarily belongs to the selected line or group of lines). Then the selected objects will be matched into one point (1) without rotation of elements (that is, they will be moved in a parallel way on the screen)
  • You can continue working with this command, pointing the cursor at another point.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design222.pngbutton and point the cursor intersection at this group.

After viewing the matching (or making adjustments, as will be described below), deselect the groups. For this purpose, press the design223.pngbutton and specify the group that needs to be deleted. If it is only one group, it will be deleted automatically.

At that, screen copies disappear, and changes in the original pieces remain.


design224.png

Matching Piece Sections

To match a line or a group of selected lines, matching them by two points, do the following:

  • Select the lines as described above.
  • Press the design225.pngbutton. Then the cursor will look like design226.png
  • Specify the first stationary point (1).
  • Specify the first point to be moved of the selected element of drawing (2).
  • Specify the second stationary point (3).
  • Specify the second point to be moved of the selected element of drawing (4).


As the result of that, the first point of the selected lines will be precisely matched into the first stationary point, and the second stationary point will set the direction for rotation of the selected element.

  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design227.pngbutton and point the cursor intersection at this group.
  • After viewing the matching (or making adjustments, as will be described below), deselect the groups. For this purpose, press the design228.pngbutton and point the cursor intersection at the group to be deleted. If it is only one group, it will be deleted automatically.

At that, screen copies disappear, and changes in the original pieces remain.

design229.png

Matching Ends of Sections

To match a group of lines, matching its end with the end of a stationary line, do the following:

  • Select the lines as described above.
  • Press the design230.pngbutton. Then the cursor will look likedesign231.png
  • Specify the end of the stationary line (1а) not far from the end point (1).
  • Specify the end of the line being moved or the group of selected lines (2а) not far from the end point (2).

When this command is working, the lines are matched by their ends, that is, by their vector direction. The lines are matched for as long as their configuration coincides.

design232.png
  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design233.pngbutton and point the cursor intersection at this group.
  • After viewing the matching (or making adjustments, as will be described below), deselect the groups. For this purpose, press the design234.pngbutton and point the cursor intersection at the group to be deleted (if it is one group, it will be deleted automatically).

At that, screen copies disappear, and changes in the original pieces remain.

Matching Ends of Sections on Extension

To match a group of selected lines, matching the ends of the lines on the extension, do the following:

  • Select the lines as described above.
  • Press the design235.pngbutton. Then the cursor will look like design236.png
  • Specify the end of the stationary line (1а) not far from the end point (1).
  • Specify the end of the line being moved or the group of selected lines (2а) not far from the end point (2).

At that, the line of the group being moved will be matched on the extension of the stationary line.

  • You can continue working with this command, pointing the cursor at an element of another group.
  • Press the right mouse button to quit the command.
  • For step-by-step cancellation of actions with the given group, choose the design237.pngbutton and point the cursor intersection at this group.
  • After viewing the matching (or making adjustments, as will be described below), deselect the groups. For this purpose, press the design238.pngbutton and point the cursor intersection at the group to be deleted (if it is one group, it will be deleted automatically).

At that, screen copies disappear, and changes in the original pieces remain.

design239.png
Special feature

It is a characteristic feature of all screen matching commands that when screen groups are created, their colors are different. If they are matched to one another, the color of the group being matched (moveable group) is changed for the color of the stationary one, and now it is a unified group. For functioning of the screen moving commands it will not be important, an element of which exactly part of this group is specified. When a screen group is deleted, if there is only one group on the screen at the moment (though it consists of several groups matched to one another), it will be deleted automatically.

No changes happen to the pieces (originals) during screen matching, so these actions will not be included in the algorithm window.

But when the Deformations commands are used in the Lines tab, the essence of the actions being performed is reduced to the following: Matching of objects is performed on the screen, but these actions are not included in the algorithm because moving on the screen does not introduce any changes in the pieces. But in case if the pieces, or selected areas of the pieces (or rather, their screen copies), after they have been matched on the screen in some way, will be changed and corrected through the use of the Deformations commands (move points while deforming lines, etc.), these actions will be performed in a parallel way on the very pieces in the drawing (the originals), and included in the algorithm.


Program Settings

In the program there is a possibility of changing some operating settings. The program settings allow the work to be organized in such a way that it would be as convenient as possible.

To call up the settings, choose the design240.pngbutton. At that, the settings window is displayed on the screen.

design241.png

For the customized settings to be saved and called up next time the computer is powered, make sure to press the Save button before you quit the settings window.


1). You can change the general parameters of the program in the “General” tab.

Click at the appropriate switch to set the desired parameter.


design242.png

The tab is divided into 2 more tabs: “General” and “Design”


а) In the “Design” tab there is the Automatic Object Naming switch.

design243.png

In this mode (the Yes button), the window with the name of the future element is not displayed for commands that do not require entering any additional parameters except the name (and a comment if necessary), because the program will assign names automatically in sequence.

For example, when the “Arbitrarily Positioned Point” command is chosen in the design244.pngbutton menu, the window for naming the new point will be displayed in the general naming mode:

design245.png

In the automatic naming mode, the following text will be displayed on the help bar for such commands:

design246.png

Now when this command is chosen it is enough to specify a position for the new point on the screen, without filling in a dialog box. Its name will be assigned by the program automatically in sequence.

If you have changed your mind about performing a certain command in the automatic naming mode (for example, if you want to make a comment), press the Alt key on the keyboard. At that, the help in the bottom of the screen will be rewritten:

design247.png

Now the command functions in the usual mode, with dialog boxes displayed where you can control the names, or change them into other names manually.


To work in the usual naming mode, set the switch for the No button.

In this mode, dialog boxes will always be displayed, and you will have the choice: either to enter names for the elements manually, or simply to confirm the names assigned by the program automatically.

If there is a need to activate the automatic naming mode for some command in the usual naming mode, press the Alt key on the keyboard after pressing the button of this function (by analogy with the auto mode), and then choose the object and perform the function.


б) In the “Design” tab there is the setting for displaying Algorithm Scrolling on the screen

design249.png

If the Yes switch has been activated, scrolling of project stages will be displayed on the right side of the bottom panel of the screen, similar to scrolling in the “Program Checkout” window.

design250.png

в) In the “Design” tab there is the Automatic Project Execution setting when it is called up, which is meant for viewing the construction on the screen without the additional design131.pngexecution command.

design131_1.png

In the “General” tab there are the following settings:

a) The Precision of Linear Dimensions Output setting

design251.png

b) The Measurement Units setting

design252.png

For temporary transition into other measurement units, you can use the switch in the bottom panel of the screen. If you set the parameter in the settings window and save the settings, then the measurement units chosen for working will be active at once when the program is started.

c) The setting of variants for displaying Error Messages

design253.png

For the “Pushbutton” variant: if the design254.pngbutton has been chosen, messages will be displayed on the screen when the functions are being performed. It becomes active exactly at the moment when the message appears:

design255.png

For the “Screen” variant: Messages are displayed at once in the middle of the working screen:

design256.png

d) The Beeping setting

design257.png

Depending on the status of this switch, the setting allows the user to work either with sounds or without them during execution of commands. If beeping is disabled in the program, the sounds remain for messages and queries display on the screen.


e) The Grain Direction setting, established automatically when the piece is assembled.

design258.png

f) The Point Size on the Screen setting

design259.png

It allows the user to adjust the value for the point size on the screen (The average values are 3-4 pix)


g) The setting of Pop-up Prompts Display Time (sec).

design259_1.png

It allows the user to set the display time for pop-up prompts in the button menu. For example, you can increase the time of their display for the period of learning to use the program.


h) The Auto Saving setting design259_3.png

When the time interval value (in minutes) is entered in the window, the construction will be automatically saved in the base with the chosen periodicity.


i) The Input Language Switch setting

design259_4.png

It allows the user to set the required pair of input languages to be switched automatically in the cells of numerical and text values.

For example, in the cells of program functions where it is necessary to input text there will be the Russian language, and in the cells of numbers input there will be English. The main input language on the computer (for input of numbers) has been set as English, and you can choose any language of those set on the computer, from the drop-down list in the setting, as an additional language (for input of texts): Ukrainian, or Russian.

To cancel such switching you have to establish the setting into the No position. For example, in the English-language version of the program such a switch makes no sense.


j) The setting of Dialog Boxes Positioning on the Screen: (displayed when functions are called up)

design259_2.png


k) The setting of Line Direction output

design259_6.png design259_5.png

Output of the positive direction of lines (shown as arrows) when a piece element is selected

l) The setting of Synchronization of text menu and button menu functioning

design259_7.png

When a function in the text menu is selected, the function of the button menu will be chosen automatically.


m) The setting of screen scaling parameters

design259_8.png

The setting defines the value of the maximum scale of image on the screen (up to 10:1).

If limitation of scale is disabled, such inaccuracies at performing of functions will be visible, the values of which are actually equal to zero and do not require adjusting.


n) The Panel Coloring setting for the tab of the horizontal menu that is active at the moment

design259_9.png

The order of colors corresponds to the colors setting for Piece Groups in the COLOR PALETT tab.

design259_10.png

2) The Color Palette tab allows the user to edit the program color score.

To do so, click on the image of the element, the color of which you want to change. The program will show the name of the chosen element in the bottom of the settings window:

design261.png

You can open the list in the elements window, and choose the required element. By clicking on the Color box, you can change the color of the object. For that purpose, the program will display the standard color palette where you can choose a different color for any element by clicking on it.

You can also change the line type:

design259_11.png


3) The Plotter tab defines the information printout parameters.


design262.png

a) Printout in the program can be performed directly to the printer, to the plotter, and also to the task base of the plotter (for the industrial versions of CAD). Projects can be printed out both at actual size and in the established scale.

After making changes, the program settings can be applied temporarily (until the moment of program reset) by pressing the Yes button. For these settings to be applied permanently you must record them into memory by pressing the Save button.

The ways of project printout are described in more detail separately.


b) Size setting for the Text contour

design263.png

This setting works with the “Explanatory Text” function of the Lines tab (the design264.pngbutton).

It allows the user to set the sizes of symbols (letters and numbers) in the “Size” field, and the distances between them in the “Step” field (in the same measurement units, in which all the work in the project is set).


c) The Rough Cutting Parameters setting.

design265.png

This setting allows the user to create circular allowances around the piece contour in order to form rough cutting (so-called “Drafts”).

«Hot» Keys

For the sake of convenience, some functions of scaling, piece organization, etc., except the button menu and the text menu, are also presented with the so-called “Hot” keys. You have to press a certain key on the keyboard to perform a command.

The “Hot” keys are set in the “Utilities” service program design266_1.png, the HOT KEYS (DESIGN) tab. For this purpose you need to choose one of the keys on the keyboard in the tab window and the corresponding command name line in pairs.


You can assign the keys on your own, or use this preset setting:

design266_2.png

Color highlighting of the keyboard in the picture correspond to the topic sections of the program:

design266_3.png- Measurements (Identifiers); design266_4.png- Visibility of Elements; design266_5.png- Lines;

design266_6.png- Work with Screen; design266_7.png]- Pieces; design266_8.png- Modifications; design266_9.png- Points;

For example, thedesign266_10.png] buttons correspond to the functions of shifting the image on the screen: up, left, down and right.

Attention


For a mouse with a central scroll wheel, there are additional capabilities:

- when the wheel is rotated up, the image around the cursor is reduced ;

- when the wheel is rotated down, the image around the cursor is enlarged;

- if you press and hold the wheel, the image will be shifted;

These operations are performed simultaneously with operation of any other commands in the program, you don’t have to stop performing the current command to use the scroll wheel.


Screen Call-Up of Construction by Size / Height / Fullness

In the bottom panel of the screen there is the screen call-up of construction by size, height, and fullness. design279.png

That is, except the possibility of setting the required project parameters in the “Initial Data” Table, you can click the left mouse button on the indicator near the required parameter (height, size, fullness). Or choose the required line by a click, or navigate “up” and “down” through the entire scale with the help of the “Up” design280.pngand “Down” design281.pngkeys on the keyboard.



Screen scrolling of a project

Screen rotation of a drawing

Sketches in a project