Constructor:Screen movements of pieces (shifts, rotations, folding, etc)
Contents
- 1 Arbitrary movement
- 2 Move pieces by a set value
- 3 Screen turn of symmetrical pieces
- 4 Screen rotation of a piece around its center
- 5 Screen rotation of a piece around a point
- 6 Screen rotation of a piece by 90 degrees
- 7 Screen mirror
- 8 Fold a part of the piece
- 9 Restore the piece to its initial state
Arbitrary movement
To perform arbitrary movement of a piece (or a group of superposed pieces) across the screen:
· Select the button
in the screen functions menu. The cursor will be changed to
You can also follow the menu points “Window/Screen operations with a piece/ Move a piece”.
· Specify the piece and, without releasing the left mouse button, move the cursor around the screen to the necessary area
· Release the mouse button after setting the necessary movement of the piece or the group of pieces
· If necessary, you can repeat the function for other pieces
To stop the functions and switch off the cursor, click the right mouse button.
ADDITIONAL MODE To move several free pieces:
· Select the function for moving pieces
· Press the <SHIFT> button on the keyboard and, while holding it down, select the free pieces one by one (i.e., those which are not grouped) to move.
· Release the <SHIFT> button and, while holding down the mouse button on the last specified piece, drag the cursor around the screen to the necessary area.
· Release the mouse button after making the necessary movement of the selected pieces
ADDITIONAL MODE To create a copy of the moved piece:
· After selection of the function
press the <CTRL> key on the keyboard and, while holding it down, specify the piece. An untitled copy of the piece is created and this copy will be moved.
· If the function
is performed while holding down <CTRL> and <ALT> keys at the same time, the piece will maintain its screen position (rotations, etc) while a moveable copy is created.
Move pieces by a set value
To move a piece (or a group of superposed pieces) on the screen by a set value:
· Select the button
in the screen functions menu. The cursor will be changed to
.
You can also follow the text menu points “Window/Screen operations with a piece/ Move piece by…”
· Specify the piece. The window is displayed on the screen
· Set the movement value relative to the coordinate axis in the input window
· Press the YES button to confirm or CANCEL button to cancel movement.
Switch
becomes active, if a piece from a group of superposed pieces is specified. On switching off this option, you can move only one specified piece from the group of pieces.
For example, you can create a new piece with the command for assembling (
- “Piece/ Model/ Assemble piece”) placing the pieces from the group at a distance from each other with the help of the given function.
Screen turn of symmetrical pieces
Symmetrical pieces can be stored in the system as a half, with “Fold” indication at the fold line. To unfold a symmetrical piece on the screen:
· Select the button
in the screen functions menu. The cursor will be changed to
.You can also follow the menu points “Window/ Screen operations with the piece/ Turn the symmetrical piece”.
· Specify the symmetrical piece. The piece is unfolded to full.
· To return the piece to the initial state, specify the piece on its initial part.
ATTENTION! The function is only used to view symmetrical piece as unfolded.
You cannot see any notches on the second, unfolded half of the piece. This half of the piece is inactive for work.
The function
-“Piece/ Unfold to full is used for full unfolding of a piece in the database.
Screen rotation of a piece around its center
For arbitrary rotation of a piece (or a group of superposed pieces):
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Screen operations with the piece/ Rotate the piece around its center”.
· Specify the piece and while holding down the left mouse button drag the cursor around the screen
· Release the mouse button, after setting arbitrary rotation.
The piece (or the group of pieces) rotates on the screen around its center.
To distinguish pieces with screen rotation, the signature point (
) is double outlined (
).
· To restore the piece to its initial state, select the button
of the screen menu or follow the text menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state
Screen rotation of a piece around a point
To rotate a piece (or a group of superposed pieces) around a point:
· Select the button
in the screen functions menu. The cursor will be changed to
.
You can also follow the menu points “Window/ Screen operations with the piece/ Rotate the piece around a point”.
· Specify the point (1) - rotation center on the piece.
· Specify the piece (2) and drag the cursor around the screen, while holding down the left mouse button.
· Release the mouse button, after setting an arbitrary rotation
The piece (or the group of pieces) rotates around the point.
To distinguish pieces with screen rotation, the signature point (
) is double outlined (
).
· To restore the piece to its initial state, select the button
of the screen menu or follow the text menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state
ADDITIONAL MODE To rotate only one of the superposed pieces, perform the command with pressing the <CTRL> key after selecting the function
.
Screen rotation of a piece by 90 degrees
To rotate a piece (or a group of superposed pieces) on the screen by 90 degrees:
· Select the button
in the screen functions menu. The cursor will be changed to
.
You can also follow the menu points “Window/ Screen operations with the piece/ Rotate the piece by 90 degrees”
Specify the piece. The piece or the group of pieces will rotate by 90 degrees clockwise.
Every new cursor click continues rotation of the piece clockwise.
To distinguish pieces with screen rotation, the signature point (
) is double outlined (
).
· To restore the piece to its initial state, select the button
of the screen menu or follow the text menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state
ADDITIONAL MODE To rotate the piece counter-clockwise, select the function
. while holding down the <CTRL> key at the same time
ATTENTION! To rotate a piece with resorting in the database, the command
. - “Piece/ Resort is used instead of the given screen function.
Screen mirror
To mirror a piece (or a group of superposed pieces) on the screen:
· Select the button
in the screen functions menu. The cursor will be changed to
.
You can also follow the menu points “Window/ Screen operations with the piece/ Mirror the piece”
· Specify the piece. The options for mirroring are displayed on the screen
· Select the rotation option:
- vertically
- horizontally
- around a specified line
Mirror of the piece or the group of pieces will be performed according to the option selected.
For the screen mirrored pieces, the signature point (
) is displayed as an ellipse (
).
If in addition the piece is rotated on the screen, the signature point is displayed as a double outlined ellipse (
).
· To restore the piece to its initial state, select the button
of the screen menu or follow the text menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state
You can also perform the function
for this piece once again.
The group of superposed pieces can be restored to their initial view only after this function is performed again.
FEATURES For the mirrored pieces, the functions (positive skipping, etc.) are performed according to position of the piece on the screen, not in the database.
ATTENTION! To mirror pieces with the following resorting in the database, the function
“Piece/ Resort” is used instead of the given screen function.
Fold a part of the piece
To fold a part of the piece (or the group of superposed pieces) along the fold line:
· Select the button
in the screen functions menu. The cursor will be changed to
.
You can also follow the menu points “Window/ Screen operations with the piece/ Fold the piece”
· Specify the fold line (1) on the contour of any type
· Specify the part of the piece to be folded (2)
The specified part of the piece is folded on the screen along the fold line.
ATTENTION! If the fold line is figured (curved), it is important to select the click point on the fold line, because folding along the fold line is performed relative to the tangent in the point specified.
· To restore the piece to its initial state, select the button
of the screen menu or follow the text menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state
You can also perform the function
for this piece once again.
The group of superposed pieces can be restored to their initial view only after this function is performed again.
ADDITIONAL MODE Two additional function modes are switched on when pressing the <CTRL> key after selection of the command
:
The first pressing of the <CTRL> key: Folding relative to the tangent in the end point of the fold line. To perform this command, specify the section close to the end point as well as the part of the piece to be folded.
You need to use this option for pieces with a figured fold line, because in this case, the click close to the fold line instead of its very end (in the end point) has a significant effect on precision of the fold.
The second pressing of the <CTRL> key: Folding relative to the line set by two points on the piece. In this case, two points defining the fold line and the part of the piece to be folded are specified.
FEATURES 1) Folded piece can not be folded relative to a different line.
2) All the commands are applicable to folded pieces, except some functions:
CONTOUR,
,
,
SECTION,
LINES,
,
POINT and
SEAMS. The following message is displayed on the screen:
|
3) While performing the command, specify the part to be folded as far from the fold line as possible.
Otherwise, the tangent on the figured fold line can invade the other part of the piece, and the other half will be folded. For example, to fold the piece on the side of a figured dart, you can specify the part to be folded ON THE SAME SECTION in such a way that the click will be the one and on the other side of the tangent and correspondingly, folding of different parts will be performed.
It is also necessary to specify the part to be folded as far from the fold line as possible to make sure that the folded part is not located in different sections of the piece in the gradation.
4) The function
- “Point/ Move point to point” can be used with folded pieces, for example, to correct allowance s for hem.
Always specify the point on the folded part as the POINT TO BE SHIFTED (2).
(The fixed point (1) is located at the crossing of the side cut and equidistant from the hem.
Equidistance width in this place equals the value of double hem.).
Restore the piece to its initial state
After performing screen rotations
, folding
, symmetrical spread
, you can restore the piece to its initial state according to its position in the database. To do so:
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Screen operations with the piece/ Restore the piece to its initial state”.
· Specify the piece
The piece is restored to the position, in which it is stored in the database.
FEATURES The function is not applicable to superposed pieces. To use it, you should first ungroup the pieces (the button
of the screen menu), and then perform the function
.
