Constructor:Rotating a section
Contents
Rotate a section arbitrarily
The function allows to set arbitrary rotation of a section around a specified point. For example, set a small bell shape along the skirt bottom moving a side seam.
To rotate a section arbitrarily:
- Select the SECTION tab and the button
in the tab. The cursor view is changed to
. You can also follow the text menu points “Section/ Rotate arbitrarily”. - Specify the point (rotation center)
- Specify the section and drag the cursor with the section around the screen without releasing the mouse button. Release the button when the necessary rotation is set. The following request is displayed on the screen:
- Set the switch for shifting modes to a necessary position:
- Press the YES button to confirm input of data, press CANCEL to cancel.
You can rotate several sections at once.
To do so:
- After selection of the function press the <CTRL> key and release it at once.
- Specify the point (rotation center).
- Specify the first section to be rotated (clockwise)
- Specify the last section to be rotated and set rotation of the section without releasing the mouse button.
This option of the function is not applicable to superposed pieces.
Rotate a section by an angle
The function allows to rotate a section by a certain angle. To do so:
- Select the SECTION tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Section/ Rotate by an angle”. - Specify the point (rotation center), then specify the section. The window for input of data is displayed on the screen:
- Set the rotation angle in the input line. The rotation angle is determined by clock direction (using the hint image
): clockwise - “plus” sign, counter-clockwise – “minus” sign.
You can input values different in size manually (button
), or from the buffer (button
) .
Set the switch for shifting modes
to a necessary position:
The YES button: move a section with deformation of adjacent sections,
The NO button: move a section without any deformation.
- Press the YES button to confirm input of data, press CANCEL to cancel.
You can rotate by an angle several sections at once.
To do so:
- After selection of the function press the <CTRL> key and release it at once.
- Specify the point (rotation center).
- Specify the first and the last sections to be rotated (clockwise)
- Set the rotation angle.
This option of the function is not applicable to superposed pieces.
The maximized window for input of data (the button
) for this function is displayed on the green background, since the table contains nonlinear values – angles. When creating the “Seam algebra” buffer for this function, you have to work taking into account the tab type. To change the tab type “Linear value” (i.e. lengths) to “Angle value” and vice versa, click the right mouse button in any place of the value table.
An additional menu is displayed on the screen, where the tab type can be changed with clicking the line:
Rotate a section by a value
The function allows to rotate a section by a certain value. To do so:
- Select the SECTION tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Section/ Rotate by a value”. - Specify the point (1) (rotation center), then specify the section (2) and the point (3) of the section where the value will be set. The window for input of data is displayed on the screen:
- Set the rotation angle in the input line. The rotation direction is determined by clock direction (using the hint image
): clockwise - “plus” sign, counter-clockwise – “minus” sign.
You can input values different in size manually (button
), or from the buffer (button
) .
Set the switch for shifting modes
to a necessary position:
The YES button: move a section with deformation of adjacent sections,
The NO button: move a section without any deformation.
- Press the YES button to confirm input of data, press CANCEL to cancel.
You can rotate several sections at once.
To do so:
- After selection of the function press the <CTRL> key and release it at once.
- Specify the point (rotation center).
- Specify the first and the last sections to be rotated (clockwise)
- Set the distance reference point and the rotation value.
This option of the function is not applicable to superposed pieces.
Example: Rotation of the side seam section of a skirt with setting the rotation value in different points.
Mirror a section
To mirror a section:
- Select the SECTION tab and the button
in this section. The cursor view is changed to
. You can also follow the text menu points “Section/ Mirror”. - Specify the section (1). It will be mirrored around an imaginary line joining its end points. If necessary, the function can be repeated
This function can be used, for example, after copying similar sections between the pieces with different sorting on the screen (left/right), after copying a side seam section from back to front, when transferring vertical sleeve seams, etc.
Set an angle between the sections
The function allows to set an angle between the sections with one contour and the sections with two contours of different type joined in one point.
To set an angle between two sections:
- Select the SECTION tab and the button
in this tab. The cursor view is changed to
. You can also follow the text menu points “Section/ Set an angle between the sections”. - Specify the ending of the fixed section (1) next to the end point
- Specify the ending of the section to be rotated (2) next to the end point.
The window for input of data is displayed on the screen:
- Set the angle between the sections in the input line
You can input values different in size manually (button
), or from the buffer (button
) .
- Press the YES button to confirm input of data, press CANCEL to cancel.
- The window for selection of deformation mode is displayed on the screen:
If the mode
Rotate the whole section is selected, the whole section to be moved will be rotated (2). If the mode is not selected, only a part of the section next to their common corner point will be rotated.
- To confirm the rotation mode press the YES button, to cancel press CANCEL.
For quick setting of a 90 degrees angle without opening the data window, press and hold the <СTRL> key on the keyboard after selection of the function and then specify the sections.
1) When an angle is set between the sections of two different contours, the sections must have an exact connection meeting in one end point.
2) This function is not applicable to the sections of superposed pieces.
3) In the mode for rotation of a part of the section
Rotate the whole section, there can be an error in performing the function up to 0,4 degree due to deformation of the part of the section to be rotated. If you increase precision (in the program settings), the time for performance of the function will be increased significantly.
5) A maximized window for input of values (the button
) for this function is displayed on the green background, because the table contains nonlinear values (angles). When creating a “Seam algebra” buffer for this function, you have to work taking into account the tab type. To change the tab type from “Linear value” (i.e. lengths) to “Angle value” and vice versa, click the right mouse button in any place of the value table.
An additional menu is displayed on the screen, where you can change the tab type with clicking the line:








