Constructor:Measuring lengths in "Seam algebra"
Contents
- 1 Measure length of asection
- 2 Measuring a portion of section length
- 3 Measuring distance between points in a straight line
- 4 Measuring a projection of a distance between points to Х (or Y) axis
- 5 Measuring distance along a curve from a point to a crossing with a line
- 6 Measuring distance between two lines along a curve
- 7 Output of section lengths of a contour and of distance between gashes
Measure length of asection
Measurement of distance between two End points of a section along a curve. To measure length of a section:
- Select the command
”Seam algebra”. The cursor view is changed to
. - Select the measured section (1). The selected section is highlighted with color on the screen.
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.

Measuring a portion of section length
Measurement is done for Intermediate points of any type:
,
,
,
- Checkpoint, Intermediate, Functional(“In
set ratio”, “At a set distance from a point”)
Measured is a part of one section between two Intermediate points or between an Intermediate and an End point of one section (along a curve).
To measure the distance between two points (notches) of a section:
- Select the command
”Seam algebra”. The cursor view is changed to
. - Specify the first point (1) and the second (2) point or a notch of a given section
At the same time the section part selected for measurement is highlighted with color on the screen.
You can view the results for the working size (in the window for display
of measurements) or for a graded piece
.

Measuring distance between points in a straight line
Measurement is done along a straight line between any points of a piece. To do the measurement:
- Select the command
of “Seam algebra”. The cursor view is changed to
. - Specify the first (1) and the second (2) points of any type.
A screen measurement line (a straight line between specified points) is displayed
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.
.ADDITIONAL MODE Measurement of distance between any two screen points (in any place of a section or between sizes of a graded piece).
1) To measure the distance along a straight line between two points in any place of a section:
- Specify the first (1) and the second (2) section in the place of measurement (a point is unnecessary there).
The sections are highlighted with color, and a straight screen measurement line is displayed.
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.
2) Tomeasure the distance between the points of different sizes of a graded piece:
- Specify the first (1) and the second (2) point in different sizes of the graded piece.
The sections are highlighted with color, and a straight screen measurement line is displayed. The measurement results is displayed on the grey background in the results window.

ADDITIONAL MODE Measurement of the distance between the point and the curve border (the most concave or most prominent part of a section):
- Press the <CTRL> key on the keyboard and while holding it down select the command
of the “Seam algebra”
- Specify the point (1) and the section in any place (2) of the curved (concave) area of the section.
The sections are highlighted with color, and a straight screen measurement line is displayed.
You can view the results for the working size (in the window for display
of measurements) or for a graded piece
.

FEATURES You can measure distances between the points on the group of superposed pieces and in rotated coordinate axes.
Measuring a projection of a distance between points to Х (or Y) axis
Measurement of projection is often used to define width or length of the garment etc. Measurement is done between the points on the bias, but measured is the projection of this distance on X, Y axis.
To measure projection on Х, Y axis:
- Specify the first point (1), from which the projection will be drawn
- Specify the second (2) point, which limits the level of drawing the projection
The points are highlighted with color, and a straight screen measurement line is displayed on the screen.
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.

ADDITIONAL MODE
1) Like with the command
- “Measure distance between points”, you can measure the distance between any points of the screen with these functions (the
<CTRL> mode)
2) Like with the command
- “Measure distance between points”, you can measure the distance between a point and the border of the section curve with
these functions (the <ALT> mode).

FEATURES You can measure distances between the points on a group of superposed pieces as well as in rotated coordinate axes.
Measuring distance along a curve from a point to a crossing with a line
This measurement is applied if a line of an inner contour (section of a dart side, section of a slanted pocket entry) is drafted on the piece, and you need to measure the distance along the curve from a point to crossing with this line. The crossing does not have to be evident, but it can be located on the line.
To measure distance from a point to crossing with a line:
- Specify the point (1) as beginning of measurement along the curve.
- Specify the line (2) up to crossing with which measurement is done.
The measured part of the section is highlighted on the screen.
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.
ATTENTION! This measurement is done between a point and a line of the same section.

FEATURES When in some sizes a line goes to the other side of the End point, the measurement value in such sizes will equal 0.
Measuring distance between two lines along a curve
This measurement is used to measure (along a curve) a part of a section between crossings of the inner contour with two lines. The crossing does not have to be evident, but it can be located on the lines.
To do the measurement:
- Specify the first limiting line (1), specify the measurement section (2) and the second limiting line (3).
The measured part of the section is highlighted on the screen.
You can view the results for the working size (in the window for display of measurements) or for a graded piece
.
ATTENTION! This measurement is done between the crossings of two lines of the same section.

Output of section lengths of a contour and of distance between gashes
To display on the screen lengths of all the sections of a specified piece contour:
- Specify any contour of the piece.
The lengths of all the sections and the distances between the notches are displayed on the screen

- To view lengths in a different size, use the window of sizes
(“size scroll”) on the lower panel of the
working window
- To remove lengths displayed on the screen, click the contour again after selection of the same command.