Constructor:Functions, which service performance of all commands

From Julivi Help
Jump to: navigation, search

Functions responsible for performance of all commands The program has a number of service functions used during performance of different commands.

«Redraft» the screen

With the help of the button embim1035.pngon the lower panel, you can clear the screen of color highlights, which appear during performance of some functions while selecting points, sections, contours and pieces.

Messages

 

If incorrect operations have been done while performing a function, a message window is displayed on the screen including information about error in the process, or a user warning, etc.

The program has two options for displaying messages, depending on selection of the setting (text menu points “Settings/ Program parameters”, GENERAL/ General tab):

 
embim1036.png

1)    When working with the “Screen” type, messages are displayed in the center of the working screen at once.

2)    When working with the “Button” type, information (message) command embim1037.png becomes active in the screen button menu only if an error took place when performing the command, or a user warning needs to be displayed.

Upon the button selection, the message with the information why the function cannot be performed etc. is displayed on the screen.

  embim1038.png

An experienced user, who understands the error, does not have to use this button, but continue work with the program, using the function correctly.

Information messages can be removed from the screen with pressing YES button in the information window, or with the help of ESC and ENTER keys on the keyboard (like in the dialogue windows of the commands)

Blocking mode

When you need to switch off sensitivity of a piece (or a group of pieces), you can use the blocking mode for making changes (“Blocking mode”).

To switch off piece sensitivity on the screen:

·        Select the button embim1039.png in the screen functions menu. The cursor will be changed to embim1040.png.

You can also follow the text menu points “Window/ Block/allow making changes to the piece”.

·        Specify the piece on the screen

The piece (or the group of superposed pieces) is highlighted with a duller color.

 

ADDITIONAL MODE Working with superposed pieces, you can switch off only one, specified, piece of the group. To do so, perform the command holding down the <CTRL> key after selection of the function embim1042.png.

Similar to “Uniform pieces” (reference pieces from other models), “Blocked” pieces cannot be altered, but they can be used for the screen functions of rotation, shift, making measurements in “Seam algebra”, etc.

Color selection of pieces in the blocked mode is set in the program setting “Color” (text menu points “Settings/ Program parameters”, COLOR GAMUT tab)

embim1043.png

Selection of piece color on the screen

The command allows to select a necessary color for the piece and the groups of lines (the button embim1044.pngof the screen menu).

To select a new color for the piece or the group of lines:

·        Select the button embim1045.png in the screen functions menu. The cursor will be changed to embim1046.png.

You can also use the text menu points “Window/ Set the piece color”.

·        The window for color selection is displayed on the screen with a highlighted color cell .corresponding to the selected piece.

·        Select the desired color with specifying one of the cells in the window.

The piece becomes of selected color and the window for color selection is closed.

embim1047.png

·        Specify the next piece to continue work, or click the right mouse button to stop the function.

The button for color selection embim1048.png is only active when the setting Color gamut is on in “Pieces” mode (the menu points “Setting/ Program parameters”, GENERAL/ Constructor tab).:

  embim1049.png

Set of colors and their order in the selection window is set in COLOR GAMUT tab in “Pieces (Materials)” column:

embim1050.png

Abort the function

Upon selection of the button embim1051.png in the screen functions menu, the function selected is stopped.

This button is activated upon selection of the program functions.

For example, when assembling the piece (embim1052.png - “Piece/ Model/ Assemble a piece”) and making an obviously wrong selection of sections you can abort the function, so that an incorrect piece will not be displayed on the screen.

Cancel selection of elements on the screen

If while performing the function a number of elements are selected, the button embim1053.pngallows to deselect chosen elements step-by-step (one button click is one step back).

After this you can continue the function selecting the necessary elements, i.e. you don’t have to stop the main function.

For example, when assembling a piece (embim1054.png - “Piece/ Model/ Assemble a piece”) and making an incorrect selection of a section, you can cancel your selection and specify a different section without having to abort the assembly function.