Constructor:Commands for organzing work on the screen
Contents
Work with the screen
Opening and deleting pieces from the screen
Open pieces on the screen
To open a piece from the database on the screen, select the command
in the screen functions menu (or follow the points of the text menu “Object/ Work with the database”). The window “Work with the database” with the list of pieces will be displayed on the screen.
Work order in the window “Work with the database” is described in a separate section Order of opening pieces.
ADDITIONAL MODE To open a second copy of the piece:
· Press and hold the <CTRL> key on the keyboard
· Perform the command for opening pieces
. The cursor will look like
· Specify the piece
The second copy of the piece is displayed on the screen. Work with it, as well as with the groups of lines (button
of the screen menu) is a requirement to perform functions for superposed pieces with their further “Reconstruction”. The operations with untitled copies of pieces cannot be “reconstructed”.
Delete one piece from the screen
To delete one piece from the screen:
• Select the command
in the screen functions menu. The cursor will look like
• You can also follow the points of the text menu “Window / Remove piece from the screen”. Specify the piece. The piece will be deleted from the screen
• If you specify a piece from the group of superposed pieces, the following message will be displayed on the screen:
Button
- remove only selected piece of the group from the screen, -
remove the whole group of pieces.
Delete all pieces from the screen
To clear the screen and remove all pieces from it:
· Select the command
in the screen functions menu or follow the points of the text menu “Window/ Clear the screen”. The following inquiry will be displayed on the screen:
· Press the YES button to confirm clearing, NO button - to cancel deletion
This operation clears the screen from all pieces. The button view is changed for the function of restoration
.
ADDITIONAL MODE To remove all pieces from the screen without saving, select the command , while holding down the <CTRL> key on the keyboard.
FEATURES 1) When pieces are removed from the screen (
,
) pieces are automatically saved to the database, if the option is switched on in the program.
(the text menu points “Settings/ Program parameters”, GENERAL/ Constructor )
2) An inquiry about clearing the screen is not displayed, if an option
is switched off (text menu points “Settings/ Program parameters”, GENERAL/ Constructor)
Restore the screen
When the command for clearing the screen is performed, the screen menu button will be changed and take the view ![]()
.
On selection of the command
from the screen menu (or the text menu points “Window/ Restore the screen”) the last cleared screen with pieces (including untitled ones) is restored.
ATTENTION! The pieces restored to the screen are saved as such to the database, if an option
is switched on in the program (text menu points “Settings/ Program parameters”, GENERAL/ Constructor).
FEATURES 1) If you delete a piece located on the last cleared screen from the database (button of the window “Work with the database
), all the pieces, except the deleted one, will be restored upon restoration of the screen, and the following message will be displayed:
The same message will be displayed if the last cleared screen contained untitled pieces.
They remain with screen restoration until a given model is in the working window.
2) The function is automatically activated after the operations with pieces in “Work with the database” window
Delete pieces without saving
To delete pieces without saving in the database:
· Select the command
in the screen functions menu. The cursor will take the following view
.
You can also follow the points of the text menu “Window/ Delete piece without saving”.
· Specify the piece
The piece is removed from the screen, and the last unsaved operations with it are canceled.
The function is only useful in the mode of automatic saving of pieces when deleting them from the screen, i.e. only when the option
is switched on (text menu points “Settings/ Program parameters”, GENERAL/ Constructor
Save pieces in the database
Save pieces
Information about all pieces and models is kept in the database on the server. Pieces changed on the screen must be saved. Saved pieces of the model are stored in the database on the server and are available for further use (for example, in “Marker” program).
To save all changes in the pieces, press the button
in the screen functions menu (or follow the menu points “Window/ Save screen contents in the database”).
All the pieces located on the screen (except untitled pieces), will be saved to the database.
ADDITIONAL MODE
To save one piece on the screen:
· Press and hold down the <CTRL> key on the keyboard
· Press the button
in the screen functions menu. . The cursor will take the following view:
· Specify the piece to be saved .
FEATURES 1) When pieces are deleted from the screen with the help of the screen menu commands
the pieces are saved automatically, if the option
is switched on
(text menu points “Settings/ Program parameters”, GENERAL/ Constructor
2) Pieces are only saved when changes are made to the piece. I.e., when being saved, the version of the piece is observed, and if it was not changed, a repeated entry to the database will not be made.
Save pieces with creation of a back-copy
Sometimes you will not need the last version of a piece, but its previous version called a Back-copy.
The program creates an Automatic and a Manual Back-copy, depending on setting selection (text menu points “Settings/ Program parameters”, GENERAL\ Constructor
Automatic Back-copy is a previous, a last but one saved version of a piece.
When saving pieces with the help of the command
, a previously saved copy of the piece also remains in the database.
This version of the piece is displayed when opening a Back-copy.
Upon next saving of the piece, the Back-copy is replaced automatically.
When saving pieces with the help of the command
the version of the piece is monitored, and if it was not changed, a repeated copy is not created in the database. That is why, for example, when saving the piece and removing it from the screen immediately (when automatic saving is switched on), a Back-copy is not lost.
Manual Back-copy is a specially saved version of a piece necessary by a constructor.
The command for saving
works in this mode, but does not change automatically the view of the Back-copy.
A Manual Back-copy is created by the constructor himself, saving not the last but one view, but any necessary version of the piece as a Back-copy, which can be used as needed. Upon next saving of a manual Back-copy a previous version of the Back-copy is deleted.
To save a piece with creation of a manual Back-copy:
· Switch on the mode for manual saving in “Save a Back-copy” setting
(text menu points “Settings/ Program parameters”, GENERAL\ Constructor
The button
of the screen menu is switched on (it is blocked in the automatic mode):
· Call the command
of the screen menu, which is active in this mode. The cursor will take the following view:
It is also possible to follow the menu points “Window/ Save screen contents in the database with the Back-copy”.
· Specify the piece. A piece will be saved in the database and become a Back-copy
Saving of the pieces with creation of their Back-copy
saves any version of the piece, regardless of whether it was changed or not. It allows to open pieces on the screen for the first time, and save these pieces as Back-copies without changing them, in order to be able to return to the initial view of pieces.
ADDITIONAL MODE To save all pieces of the screen with creation of Back-copies, select the following command
, while holding down the <CTRL> key of the keyboard.
So, two saving commands are available in the mode of manual creation of a Back-copy:
Function
- saves a piece, and also saves this version of a piece as a Back-copy
One saving command is available in the mode of automatic creation of a Back-copy:
Function
- saves a piece, automatically saving a previously saved copy as a Back-copy
Calling of a Back-copy of a piece to the screen is done in the window “Work with the database”
- Object/ Work with the database) when an option
is switched on. The back-copy can be removed from the screen without saving (
) or saved instead of the last version of a piece.
Canceling actions with a piece (rollback)
Operations with pieces on the screen can be canceled with the function of return of operations called “Rollback”.
There are two types of rollbacks in the screen menu of the program - Step by step rollback and screen rollback, as well as the function for operation return: Cancel rollback
Screen rollback
With the help of the button
of the screen functions menu (or text menu points “Window/ Step back”) the last operation on the screen is undone:one step back.
The command is activated after performing the operations with a piece, and is blocked again after rollback is done, until the next change in the piece. With this option, the screen rollback is done one step back.
Two options are possible within this function, depending on selection in the program setting:
(text menu points “Settings/ Program parameters”, GENERAL/ Constructor
1) Only changes and modifications of the piece are canceled;
2) Modifications and screen operations (superposition, rotations, etc.) are canceled.
In “Modifications” rollback mode, the rollback function is blocked when performing screen operations (shift, rotations etc.). After modification of the piece, both this operation and the screen function performed after this modification are undone.
In “All” rollback mode some screen commands like “Scaling”, “Screen organization” etc will not be possible to undo.
FEATURES 1) When untitled pieces are displayed on the screen, screen rollback is blocked!
For example, when creating an untitled copy of a piece, applying a macrocommand, etc, the rollback function will be blocked and it will only be possible to use step by step rollback, specifying exact pieces.
2) With any change done to the piece contents on the screen, rollback will be blocked (deleting pieces from the screen, opening pieces on the screen (opening from the database, digitizing, applying macrocommands, creating copies).
3) With the function of screen rollback, it is possible to cancel an operation without losing the cursor of a given command and do it in a different way with different values (error in data input, element selection).
Step by step rollback
To cancel the last command (or several last commands) for a piece:
· Select the button
in the screen functions menu. The cursor will be changed to
You can also follow the text menu points “Window/ Cancel last command”.
· Specify the piece. The piece will change its view to the view it had before the last modification.
· Each click on the piece cancels one operation.
You cannot undo screen operations (shifts, rotations, folds) do not have, since they do not change the piece.
· When all the operations have been canceled, the rollback command is blocked and the following message is displayed:
| |
Depending on the setting
(text menu points “Settings/ Program parameters”, GENERAL/ Constructor , there are two working modes:
1) When the option is switched on, the rollback limit is the last saved version of a piece (
- “Window/ Save screen contents in the database”). All piece modifications can be canceled until they are saved. After the piece is saved, the rollback function will be blocked.
2) When the option is switched off, the rollback limit is the version of opening the piece on the screen (
- “Window/ Work with the database”). That is why the rollback option is available up to opening the piece from the database, even if the piece is saved many times during work.
Cancel rollback
Cancel rollback To restore a canceled operation with a piece:
• Select the button
in the screen functions menu. The cursor will be changed to
• Specify the piece The function is only active after rollback is done for the piece. When cancellation limit is reached, the function will be blocked.