Server:Program loading and functions

From Julivi Help
Jump to: navigation, search

Program is launched automatically after a computer operating system is loaded. The basic window of the program is displayed on the screen.

En server embim14.png

During the program launch, the following operations are automatically performed:

  • Search for a key and license definition.
  • «FireBird» loading (service, providing connection to the databases).
  • Preliminary inspection of the layout database.
  • Database inspection – inspection of compliance between layout database and model database, global settings, user list and space available on the work disk.
  • Backup of changed models - creating backup of models, which were changed.
  • Backup of the database - making a copy of model database with layouts, archiving.
  • Reserve archiving - Layout database is cleared of trash (Backup – Restore), the database indexing is updated every N (10) days.
  • Inspection of database indexes – inspection of index wholeness for layout database, deleting faulty layouts as well as layouts, models of which were deleted.
  • Installation of the latest version of layout database.

At the end of the program loading, the lower area of the window contains message «Waiting», or «Term of license usage», this indicates that process of server launch is completed. Operations with other programs of CAD JULIVI can be performed only after this point.

If the window of the program "SERVER JULIVI", displayed on the screen, is distracting, the program can be minimized by pressing the button En server embim15.png. To display the program window on the screen again, click the program icon in the system tray En server embim16.png in the lower right corner of the screen.

When programs of «CAD JULIVI» are launched, the following information is displayed in the program window of "SERVER JULIVI":

  • name of a running program;
  • work station name;
  • state of access:

Connecting

License

Copy without license

Program barred

User must not exit the program "SERVER JULIVI" before completing the system operations, as this will cause all programs of the JULIVI system to hang-up.

Description

When pressing the button En server embim17.png, user can read description of the operations of the program "SERVER JULIVI" divided into sections.

En server embim18.png

By placing a mouse cursor over the button (or the program window) and pressing the F1 key, a hint for operations with a given function will be displayed on the screen.

Database

When pressing the button En server embim19.png, a window Database information is displayed on the screen.

En server embim20.png

This window displays information about a number of created models, layouts, materials, pattern names, range and tasks for drafting, as well as the number of drafted overlays. Information about models and layouts also contain information about a number of backup copies in the database (displayed after the slash).

The button En server embim21.png allows updating the list of database parameters without exiting the program window.

Messages

If necessary, it is possible to send messages to all work stations from the program "SERVER JULIVI".

For example, if a server must be rebooted, it is possible to send a warning message and then perform forced shutdown of all workstations. To do so, press the button En server embim22.png and enter the text of warning in the available text box.

En server embim23.png

Then press the button Message to all.

To shutdown all work stations, press the button Switch off all.

Managing user list

When the button En server embim24.png is pressed, the window for managing list of users is displayed on the screen.

This window permits to create, change, and delete (user) profiles for the system programs.

En server embim25.png

  • En server embim26.png - if you need to add a user with personal settings in the program (for example, screen settings, batch colors, methods of mouse operations, etc.):
  • En server embim27.png - to delete a user from the list.
  • En server embim28.png - to review and edit a file of user's settings.
  • En server embim29.png - if you do not require to save changes after any actions in the window «User list». The window of the list closes after this button is pressed.
  • En server embim30.png - if you require to save changes after any actions in the window «User list». The window of the list closes after this button is pressed.

Adding a user

On the left side of the window, select with the cursor the main type of the program, to which a user will be added (for example, En server embim31.png).

On the right, press the button En server embim32.png and enter a new name in the text box User name (for example, HPGL). The program name (in the Program text box) is displayed automatically after the main type of the program is selected.

En server embim33.png

To apply changes, press the button En server embim34.png, the window will close. After this, the program shortcut must be created for the new user. See section Сreating a shortcut for a new user.

Creating a shortcut for a new user

After a new user is listed in the server, a shortcut must be created for that user. Open the folder JULIVI on the desktop, point with the cursor the shortcut of the program, to which the user was added and, having pressed the right mouse button, select Create shortcut in the floating menu.

En server embim35.png

Then, click the new shortcut with the right mouse button, select Properties, add space, then enter USER=HPGL (name of the new user) in the text box Object.

En server embim36.png

Press Apply and OK.

Now the new user can apply personal settings to the program by using this shortcut.

Deleting a user

Highlight the line with the name of a user and the program name (except Main) and then press the button Delete user.

En server embim37.png

Line containing the user name will be highlighted with red and will not be deleted at once. Title En server embim38.pngwill be displayed instead of the button Delete user for potential restoration of the selected user.

En server embim39.png

To apply changes, press the button En server embim40.png, the window will close.

When the window En server embim41.png is opened again, removed object will no longer be in the list.

Changing and saving settings as a separate file

On the right, highlight the line with the name of a user and the program and press the button En server embim42.png. The window User settings is displayed on the screen, this window allows reviewing and editing contents of the settings file of a given user.

En server embim43.png

It is possible to copy settings file, receive via E-mail for example, to the current user by pressing the button En server embim44.png and press the button Open after specifying a path to the received file. To save new setting parameters, press the button En server embim45.png.

If necessary, it is possible to record settings in a new file. To do so, press the button En server embim46.png, then press the button Save after entering a file name.

In order to join settings saved under a particular name (User name – for example Arm1-marker) with a corresponding program, click the right mouse button on the program shortcut at the work station. Then press the button Properties. In the text box Object, which contains path to the work file of the program, add space and then a corresponding user name C:\Julivi\Raskl\Pver3201.exe USER=Arm1 (for more details see section Сreating a shortcut for a new user. ).

Servicing model database

During operations it might be necessary to service the model database of the system. Program for servicing model database is launched by pressing the button «Model database» in the window of the program «SERVER JULIVI».

En server embim47.png

Servicing layout database

When the button «Service» is pressed, the window of the program which services layout database is displayed.

En server embim48.png

En server embim49.png

The program «Servicing layout database» allows restoring layout database from backup copies, if necessary - clean the layout database and update its indexing.

If you wish to clear layout database (Backup – Restore) and update its indexing, press the button Delete trash in the tab Layout database in the period between automatic clearance (parameter, set in the mode Program settings).

Index inspection is performed by system administrator if a problem with layout database arises.

If operations with the layout database are hindered, the database can be restored from a backup copy. To do so, highlight in the list of the window Database servicing the date when backup copy was created then press the button

«Restore». All programs, using layout database, must be switched off when this action is performed.

Layout database restoration can also be used to restore plotter settings, because these settings are recorded in the layout database.

License control

One of the program functions is license control, permitting operations of the CAD JULIVI programs. By pressing the button En server embim50.png, you can view a list of permits, listed in the key.

En server embim51.png

Maximum number of launched programs is listed for each program. A list of formats, allowed for model conversion, are specified for the program Converter. Types of plotters, permitted for connection, are specified for the program Plotter.

Getting and updating a license

License can be emailed or sent via electronic carrier (floppy disk, cd or flash-disk).

License is presented as a Timer.lcn file. License file can be packed with an archiving program Zip, in this case license file will appear as Timer.zip, which must first be unpacked.

To install the license, switch on the program, when the program is loaded, press En server embim52.png button in the message window.

Then press the button En server embim53.png in the displayed window «List of permits»:

En server embim54.png

press the button En server embim55.png, in the window of Windows NT Explorer

En server embim56.png

specify the location of the license file Timer.lcn, press the button En server embim57.png.

A message about license update will be displayed.

After this, close the window «List of permits» and you must restart the program «Server JULIVI».

System settings

The window of the main system settings is opened by pressing the button Settings in the button menu of the program.

En server embim58.png

The settings window is divided into several parts by categories.

En server embim59.png

Functional buttons for changing settings are places at the lower section of the window:

En server embim60.png

Should any changes be made to settings in any of the tabs, press the button En server embim61.png, a window with password request will be displayed

En server embim62.png

To confirm settings change, press the Ctrl + Alt + F12 key combination.

This will close the window System settings and apply the changes.

Tab "General"

The tab of general settings has information about the version of system database, number of license renewal, information about the version of database structure (for developer), as well as adjusted parameters: number of records in the protocol of operations for the program «Server JULIVI», memory volume for operations of the program «Server JULIVI», parameters of connection between workstations and the server program.

En server embim63.png

Tab "Database"

«JULIVI» system consists of three main components – the program catalogue, the catalogue containing database information, and the catalogue of backup copy.

The program catalogue is installed by default to C:\Julivi. Catalogue, containing the databases – D:\Baza.

When location of the catalogue with databases changes, settings of the program «Server JULIVI» must be changed for correct operations. Changes refer to the settings of the path to the catalogue, which has database information.

A button «Set by default» can be used to set paths to command databases of the programs «APM Constructor» and «APM Construction of basic patterns», as well as to projects created in the program «APM Constructing basic patterns».

Line Backup location is used to adjust location of the catalogue for database backup copy.

Line Location of model backup is used to adjust location of catalogue for models backup copy.

Location of the main database (location of the file JULIVI.GDB) is listed in the line - main database. Below, available disk volume is listed.

En server embim64.png

Tab "Layouts"

Tab Layout allows editing global parameter of settings for the program APM Mark: set necessary capabilities of a layout, edit gaps in the tables, section allowances as well as seam allowances, used for creating layouts. This tab contains several tabs.

En server embim65.png

Tab "Layout"

The following parameters can be adjusted in the tab Layout:

En server embim66.png

  • Sections – option to form sections (repetition of a layout portion N number of times);
  • Overlays - option to form overlays (placing a layout portion on a different number of layers);
  • Overlay portion – option to place a pattern on a portion of an overlay;
  • Printing coordinates – printing coordinates of pattern location in mini marker;
  • User protocol – keeping a user protocol (is used upon layout launch);
  • Warp line defect – user defined lengthwise boundary for placing pieces;
  • Automation – selecting parameters to form layouts for an automated cutting system;
  • Sort by sizes – in the short version of layout list, used to form sequence by size increase;
  • Half for the fold – with this setting selected for layouts with overlay type FOLD or ROUND, an option of Bigger half is displayed upon pattern cutting, this allows folding a pattern in half and place on an overlay as a whole.

En server embim67.png

  • Half batches for entire overlay – with this parameter switched on and with the parameter Half batches (in layout) selected, pattern with the parameter Number of cutting parts – 1, is placed on the entire overlay;
  • Account for gap on the sides – when piece is laid on the side of an overlay, the program accounts for a set gap in the place of contact between a piece and overlay border;
  • Advanced cutting management – option for optimizing layout for automated cutting complex;
  • Display pieces in blanks – show piece and blank in the marker;
  • Show gaps on forms – information about gap value is displayed in brief output of created layouts;
  • Additional information about pieces – when a piece is highlighted in the marker, piece name, it's length and option of possible placements on an overlay are displayed in the top section;
  • Rotate pieces at the top by 90 degrees – in the marker, if a piece at the bottom is rotated by 90 degrees, top parts of all batches are rotated accordingly by the same angle.
  • One pattern for constructor layouts – when the layout optionEn server embim68.pngis selected, patterns which have the parameter Number of cutting details – 2, only one detail is output.
  • Unfold batches – when 2 batches are selected for a layout, patterns of the 1 and 2 batches are flipped face to face;
  • Reverse grainline – with this option switched on, grainline arrows (pile direction) are directed to the right;
  • Usage per item – parameter of fabric usage per one item is added in a brief form of layout list;
  • Overlaps – option to include pattern overlaps;
  • Account for allowance – when length of layout is determined, layout allowance is accounted for;
  • Super blanks – forming common blank around several patterns;
  • Cut patterns – option to cut patterns in the marker program taking into account seam allowance;
  • Change width from the top – when overlay width is edited in the mode of placing patterns on the layout cloth, it is possible to change overlay width along the top overlay border;
  • Half-batches – with the option switched off, option to include half-batches in a layout is excluded (in case the list of overlay types does not include overlay type «In fold»)
  • Join patterns – with the option switched on, when placing details on an overlay portion in the marker it is possible to place only two details on top of each other
  • Fold face down – when patterns are placed on the layout face down.
  • Calculating cutting weight – this option is used by knitting factories, where cutting must be calculated by cloth weight. Upon reviewing ready layouts, a section «Weight» is displayed, in this section information about fabric is written in g/m2. This allows calculating usage per unit in grams. If necessary, contact the developers.
  • Sections with crossing over – switched on option allows partial placement of patterns on a section. With the option switched off, pattern can be placed on a portion of a section only by setting a cross over value for a section in layout settings;
  • Gap for blanks - account for (do not account for) gap when placing blanks;

En server embim69.png – setting maximum length of an overlay;

  • Groups – with the option switched on, it is possible to create and operate with several groups of details in the program Mark.

En server embim70.png – setting types of an overlay, which can be used in a layout;

En server embim71.png – options for rounding layout length;

En server embim72.png – measuring units of pattern area;

En server embim73.png – options for coordinating programs «APM Mark» and «Planning orders» as a part of the system.

Tab "Tables"

The tab Tables allows setting parameters of gaps, repeats, seam and section allowances, used for creating layouts. Working window looks as follows:

En server embim74.png

Table of gaps.

Six types of gaps are suggested for using in a layout.

Gap values must be set in ascending order, in other words: gap 1 – smallest of the gaps used, gap 2 – the next gap in value, and so on.

There are two options of measurement units for gaps – 1 mm and 0,1 mm.

Placement with superposing with a specified possible gap allows to place patterns in a layout one over another with a gap, specified on the server.

Table of repeats (allowances).

To adjust allowance values for patterns (to fit details on a printed fabric, or for processing during production), used in layouts, four options are suggested for repeats of a set value, and four options o repeats which depend on the size of fabric print.

Table of seam allowances.

To adjust stitching (seam) allowance of cut patterns in the program «APM Mark», four options of allowances are available. An option of allowance, used by default, is selected in the section «Basic seam».

Table of section allowances.

Six options of section allowances are suggested for using in a layout. Allowance values should also be adjusted in ascending order.

Tab "Layout name"

Parameters of automatic forming of a layout name are set in the tab Layout name.

En server embim75.png

A required component is highlighted in the left side of the window and by pressing the button En server embim76.png is then transferred to the right side of the window, where a user specifies, what will form a layout name. This way user creates sequence and list of parameters, from which a new layout name will be formed.

If an element was selected by error, it can be returned to the left side of the window by highlighting an element in the right side of the window and pressing the button En server embim77.png.

  • Limit name length – format of layout name – 8 symbols, point, 3 symbols;
  • Transform Russian symbols into English – Russian font is transformed into Latin;
  • Transfer in upper case – letters included in the layout name are all transformed into upper case;
  • Only letters and numbers – do not use additional symbols (space) in the layout name;
  • Use heights in sets – use heights and sizes in a layout name.
  • Divider – if batches from different materials are included in a layout, a divider is set between them in the window.

Tab "Print"

Parameters of forming mini layouts are set in the tab Print.

En server embim78.png

Working window looks as follows:

En server embim79.png

Column Title – forming a title of a mini layout:

  • a required component is highlighted and by pressing the button En server embim80.png is transferred to the lower section of the window, where a user specifies elements, which will form a title.
  • the button En server embim81.png is used to remove an element from the list if it is selected by error.

Column Sets – forming a list of parameters for every batch, listed in the mini layout.

Column Pieces - information, which will be printed on every piece:

Model >1 – model code will be printed on a piece, if 2 or more different models are selected in the layout.

Size >1 - size is printed on a piece, if pieces of 2 different sizes are selected in the layout.

Height >1 - height is printed on a piece, if pieces of 2 different heights are selected in the layout.

Set >1 – batch number is printed on a piece, if 2 or more batches of the same size-height are selected in the layout.

1. Do not show blanks:

  • switched on - cancels drafting of a pattern contour. Only blank contour is drafted.
  • switched off – contour of a pattern and a blank is drafted.

2. Title rotation:

  • switched on – title of mini layout is printed in the top left corner of a sheet, landscape page alignment.
  • switched off – title of a mini layout is printed in the top left corner of a sheet, portrait page alignment.

Diagram of a mini outline is always placed lengthwise on a page.

3. Specification - allows printing specifications of patterns, placed in a layout, for mini layout.

4.Rotate horizontally and rotate vertically - with these options selected, layout diagram is rotated with reference to horizontal and vertical axis, accordingly, when mini layout is printed.

5. Separate printing of sections – option to print separately mini layouts, which contain several sections.

6. Print all contours – printing in mini layouts all construction contours.

7. Color pieces – with this option, patterns of different batches are filled with different colors (gradation of grey), several batches of the same size are filled with the same color.

8. Grainlines – drafting grainlines on mini-marker.

9. Total coloring of sets – with this option selected, patterns of various batches, as well as batches of the same size, are filled with different colors (gradation of grey)

10. Print defect lines – option for printing defect lines.

11. Print section list – section number is printed after a layout title during separate printing.

12. Length of model code – number of symbols in model code, which are printed on a pattern in mini marker.

En server embim82.png - setting to select printing option of a contour with pin hole characteristics.

Tab "Cutting"

Options for optimization of an automated cutting complex are set in the tab "Cutting". Working window looks as follows:

En server embim83.png

In the selection field Entry point by default – point of knife entry (start of cutting) of the cutting complex is selected.

In the selection field Direct cut by default – parameters of pattern cutting are set:

  • Different direction for pairs – for paired details, one is cut in a clockwise direction, another one - in a counter-clockwise direction;
  • All counter-clockwise – all details in a layout are cut in a counter-clockwise direction;
  • All clockwise – all details in a layout are cut in a clockwise direction;
  • Pair by numbers – cut in the same direction odd and even pattern numbers;
  • Pair by sets – cut in the same direction patterns of the same batch;
  • Do not change – cut layout patterns without changes.

Tab "System"

ATTENTION! This tab is for system administrator use only.

En server embim84.png

Tab "Additional"

ATTENTION! This tab is for system administrator use only.

En server embim85.png

Tab "Reports"

The tab Reports allows editing the form of reports (outgoing documents) in the Programs Mark and Plotter. Meant for experienced PC users.

En server embim86.png

Tab "Backup"

This tab contains information about location of catalogues for backup copy of database and models, time of database backup, as well as time of regular database servicing.

En server embim87.png

About the program

When the button En server embim88.pngis pressed, data about the program version, developing company and contacts (telephone number, e-mail) are displayed on the screen.

En server embim89.png

Press En server embim90.pngto exit the window.

Exiting the program

User must not exit the program "SERVER JULIVI" while the system is running, because this will cause all programs of the JULIVI system to hang up.

If an attempt to exit the program, while other system programs are running, is made, a warning is displayed on the screen – You can not exit the program, stations are working.

En server embim91.png

Any program, which is a part of the system, can be switched off through the program Server JULIVI.

To do so:

  • select a program - click the left mouse button on the line with the program information;
  • click the right mouse button to display pop-up menu.

En server embim92.png

Switch of with warning – a warning is displayed on the screen of the workstation «Program will be shut down in 10 seconds» and the running program will be switched off automatically.

Switch off immediately – switches off the program without a warning.

Message – send an optional warning to the work station.

Clear blocks – if an error occurs while copying models at the work station or a computer is hung up, block can be cleared.