Utilities:Size Scale

From Julivi Help
Jump to: navigation, search

Term Size Scale is used for size, height and corpulence series to scale the pieces.

A Scale is based on one of the figure size attributes, a set of measurements.

For example, for shoulder products, it is the chest; for headwear, it is the head, etc.

In the system, different type Scales are used:

En utilits embim89.png - the Scale that consists of sizes (88, 92, 96, 100,…) and heights (164, 170, 176,…).

En utilits embim90.png - the Scale that consists of sizes only (34, 36, 38, 40, 42, 44,…).

En utilits embim91.png - the Scale that consists of sizes, heights and corpulence measures (2,3,4,…).

En utilits embim92.png - the Scale that transforms the linear size group grading (17, 18, 19, 20 and 34, 36, 38, 40 and 68, 72, 76, 80) into size and height grading (breakdown by heights 0,1,2,…).

So, models of foreign companies (give and take basis) are developed in a linear scale, but, actually, they imply the height increments, too. Such models are unhandy to work with, it is difficult to trace their height grading. When using ‘pseudo’ type scales, the linear scale is presented in size and height format.

En utilits embim93.png - the Scale for children’s garment product range. The children’s product range is characterized by wide range of sizes and heights with “non-existent” size and height combinations.

For example, the Scale includes sizes from 28 to 72 and heights from 92 to 170, but, in practice, not all the sizes are used: according to OST Standard, size 28 does not exist in height 170. The work with such a big range is complicated (big table is displayed when sizes are selected). When using Children’s Scale, you can select only “existent” under the standards size and height combinations. They will be displayed in linear type, without sizes (size-and-height instead of size).

Size Scale Creation

To create a new Size Scale:

  • Select Size Scales tab. In this tab, the program window has a violet background.

En utilits embim94.png

  • Enter the name of a new Scale in Name field (40 characters).
  • Define the Scale type by selecting an appropriate radio button in Type area.
  • Enter size range.

Depending on the Scale type selected, the sizes, heights or corpulence windows are displayed in the lower part of the tab. Sizes are separated with commas (size, comma, next size). No spaces are permitted between the sizes. Paired sizes are entered slash (/) separated.

For sizes both digits and characters may be used.

Recommendation: Enter a maximum possible size range because some restrictions are applied when ready Scales are corrected.

En utilits embim95.png

For a new model created in Constructor program, only required sizes will be taken from this range.

  • If necessary, enter additional parameters: Measurement attribute and GOST name.

En utilits embim96.pngEn utilits embim97.png

  • Click En utilits embim98.png in the bottom bar.

The new entered Scale will appear in the general Scales list.

Creation of Pseudo Size-Height Scale Type

  • Enter the first line of the smallest sizes. This is the first (0) basic height of the scale.
  • Move to the second line using <Enter> key.
  • Enter the second line of sizes. This is the second (1) height of the scale.

Middle height sizes shall be entered under the respective sizes of small height.

  • Similarly, enter the next lines of the scale (the third and so on).

En utilits embim99.png

In Constructor program, when this Scale is selected, the size-and-height table is displayed as follows:

En utilits embim100.png

Creation of Children’s Size Scale Type

To create a Children's Scale, enter the list of sizes and heights and click En utilits embim101.png.

The lower part of the tab window is viewed as follows:

En utilits embim102.png

In the spreadsheet, select only “existing” combinations putting ticks into respective boxes by mouse clicks.

If you don’t click En utilits embim103.png (Recompose Existence Table), the Scale will stay linear, but non-existing combinations won’t be excluded.

In Constructor program, when this Scale is selected, the size-and-height table is displayed as follows:

En utilits embim104.png

Size Scale Change

You can edit the Scale that is not used in models without any limitations.

For the Scale that is already used in model, you can ONLY add the sizes after the biggest (the last) size in the line. You can neither delete a size form the Scale (the last or the first size), nor add a size before the smallest size. you also can rename the Scale plus to the adding of sizes to the end of the list. This operation won’t result in breaking of the markers for the models that use this Scale.

Size Scale Removal

To remove Scale, select it in the list and click En utilits embim105.png.

1) If the Scale is not used in the models, the dialog box is displayed:

En utilits embim106.png

Clicking Yes, you confirm the Scale removal from the list, clicking No, you cancel the removal.

2) If the Scale is used in models and markers, it cannot be deleted at once.

The window with the list of these models is displayed. The models ticked red include markers.

If such ticked line is selected, the list of the respective model markers is displayed in the right-hand part.

En utilits embim107.png

To remove this Scale, you need to choose another Scale for these models (or remove them).