Constructor:Constructing seams

From Julivi Help
Revision as of 13:54, 27 March 2015 by Pavel.Gordon (Talk | contribs) (→‎Select the seam type)

Jump to: navigation, search

Construction of seams

      The program enables setting allowances for finishing (seams) all around, on all or individual sections, with a constant or variable seam width.

In order to construct seams, select the SEAMS tab on the screen horizontal panel   

embim2651.png  A number of parameters need to be set to construct a seam from the main outline:

  • Seam width
  • Seam construction type (from seam to seam, from cut to cut, etc.),
  • Seam construction mode (on one section or around the entire piece).

     

     There are several seam types:

  • The seam width is the same on all piece sections
  • The seam width is different on all piece sections
  • The seam width is variable on the section, i.e. it is different at the beginning and at the end of the section.

     Seam parameters are set on the main outline only, for each piece section. A section has its beginning and end – 2 white terminal points. The section beginning or end is determined by the positive piece rounding rule – clockwise.

Seam parameters are set in a special window which can be called up as follows:

  • Select the SEAMS tab and embim2652.png button in this tab. The cursor will take the form of embim2653.png.

The “Seams/Set seam parameters” text menu items can also be executed.

  • Hover the cursor crosshair over the piece main outline section where the seam is to be constructed and click the left mouse button.

            The section will be highlighted in color and the seam parameter setting window will be displayed on the screen:

embim2654.png

Work order in the window «Seam parameters»

  • Set the seam width
  • Select the seam type
  • Save the specified seam parameters
  • Construct the seam
  • Pass on to the next section and repeat all the operations

Set the seam width

In the left window of the seam width setting embim2655.png click the left mouse button and enter the seam parameter considering the sign: positive value if the seam is to be constructed inward the main outline, and negative if it is to be constructed outward. 1cm width is automatically set.

Select the seam type

The seam type determines the seam boundaries on the section: to the level of the adjacent section cut, to the level of the adjacent section seam, to a particular point, to the inner outline, etc.

The level to which the seam will be extended has to be set individually for the beginning and the end of the section. The left row of the seam type buttons in the “Seam parameters” window specifies parameters at the beginning of the section, while the right row is for the section end.

 

At the beginning of the section:                 And (similarly) at the end of the section:    

  

embim2656.png- from the cut;                                                                                                             to the cut - embim2657.png  

embim2658.png - from the seam                                                                                                     to the seam - embim2659.png

 

embim2661.png- from the normal line to the section beginning point;       to the normal line to the section end point - embim2662.png

 

embim2663.png- from any point on the section;                                                       to any point on the section- embim2664.png

 

embim2665.png- from the inner outline;                                                                               to the inner outline- embim2666.png

 

 

Setting Different Seam Types

 

 “From cut to cut” seam type:

 

After specifying the main outline section (1) and setting the seam width:  

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image012.jpg 

This results in constructing a seam from the section where the seam limiting points reach adjacent sections.

 

 

“From seam to seam”  seam type:

    

After specifying the main outline section (1) and setting the seam width:    

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image018.jpg     This results in constructing a seam of the section where the seam limiting points reach the level of seams on adjacent sections.  

     The “seam to seam” type construction is used most frequently; therefore, this parameter is activated in the window automatically.

 

 

 “From normal line to normal line” seam type:

 

After specifying the main outline section (1) and setting the seam width:    

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image024.jpg     This results in constructing a “hanging” seam from the specified section where the seam limiting points reach the level of the normal lines (perpendiculars) from the section terminal points.

 

 “From point to point” seam type:

 

     After specifying the main outline section (1) and setting the seam width:

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the first point of the section (2) –the seam starting point.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

 The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the second point of the section (3) –the seam end point.

     The parameter window, where the second selected button is also highlighted, is displayed on the screen again.

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image030.jpg                

     This results in constructing the seam on the part of the specified section where the normal lines from the section Intermediate points are the seam limiting points.


NOTE

 

 

 

 


1.      The starting and end points of the seam are to be specified considering the positive rounding of the outline – clockwise.

2.      When performing this construction from the section Terminal points instead of Intermediate points, the “from normal line to normal line” seam type will be actually obtained.

3.      When two points on different sections are specified, construction will not be performed.

 

 

 “From line to line” seam type:

    

After specifying the main outline section (1) and setting the seam width:

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the first contour line (2) crossing the section – the seam starting line.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

 The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the second contour line (3) crossing the section – the seam end line.

      The parameter window, where the second selected button is also highlighted, is displayed on the screen again.

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image036.jpg     This results in constructing the seam on the part of the specified section where the levels of contour lines crossing the working section are the seam limiting points.


NOTE

 

 

 

 


1.      The starting and end contour lines are to be specified considering the positive rounding of the outline – clockwise.

2.      When two contour lines on different sections are specified, construction will not be performed.

3.      The contour lines crossing the section may not reach the section level precisely.

 

Seam types are specified individually for the section beginning and end, therefore any combinations of different seam types are possible, for example:

 

 “From cut to seam” type:

 

After specifying the main outline section (1) and setting the seam width:    

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image040.jpg 

     This results in constructing the seam where the limiting point reaches the section preceding the construction at the beginning and the seam following the construction section at the end.

 

 

“From point to line” seam type

 

After specifying the main outline section (1) and setting the seam width:

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the point of the section (2) – the seam starting point.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

 The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.

 

  • Specify the contour line (3) crossing the section – the seam end line.

  The parameter window, where the second selected button is also highlighted, is displayed on the screen again.

File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image042.jpg This results in constructing the seam where the seam limiting point reaches the point perpendicular to the specified intermediate point at the beginning, and to the specified line at the end.

 

Save set seam parameters

Construct seams according to saved parameters

Moving to a different section of a piece

Closing the window of setting parameters

Special modes of setting seams

Mode «Variable width»

Mode «Ignore section»

Mode «Rounding»

Organizing work with seams

Constructing seams by saved parameters

Deleting seams

Visibility of seam parameters

Example of constructing a seam

Example of using various seam types