Constructor:Constructing seams
Contents
Construction of seams
The program enables setting allowances for finishing (seams) all around, on all or individual sections, with a constant or variable seam width.
In order to construct seams, select the SEAMS tab on the screen horizontal panel
A number of parameters need to be set to construct a seam from the main outline:
- Seam width
- Seam construction type (from seam to seam, from cut to cut, etc.),
- Seam construction mode (on one section or around the entire piece).
There are several seam types:
- The seam width is the same on all piece sections
- The seam width is different on all piece sections
- The seam width is variable on the section, i.e. it is different at the beginning and at the end of the section.
Seam parameters are set on the main outline only, for each piece section. A section has its beginning and end – 2 white terminal points. The section beginning or end is determined by the positive piece rounding rule – clockwise.
Seam parameters are set in a special window which can be called up as follows:
The “Seams/Set seam parameters” text menu items can also be executed.
- Hover the cursor crosshair over the piece main outline section where the seam is to be constructed and click the left mouse button.
The section will be highlighted in color and the seam parameter setting window will be displayed on the screen: