Constructor:Increment table
Piece grading is performed by entering increments in piece points. For grading select a piece point, enter an increment value in the table and use a grading command.
To open the Increment Table select the button
in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the program text menu. The Increment Table will appear.
Contents
- 1 Increment Table Functions
- 2 Working with the increment table
- 2.1 Open the increment table
- 2.2 Select grading property
- 2.3 Select grading mode
- 2.4 Creating groups of points
- 2.5 Inputting increment of a selected point
- 2.6 Perform grading
- 2.7 Switch to working with other piece points
- 2.8 Switch to a different grading properly: by heights, by corpulence values
- 2.9 Close the increment table
- 2.10 Save graded piece
- 2.11 Grading order in different grading modes
- 3 Special modes of the increment table
Increment Table Functions
The working window "Increment" includes a range of functions and a table of increment values. In the left column the increment values for the X axis are displayed, the right column features increment values for the Y axis.
Depending on the selected grading type( by size
, by height
, by fullness
), the table displays the list of sizes, lengths and fullnesses of the working model:

The increment value of graded pieces in a particular point is displayed, if you move the cursor and left click it.
The basic size is an original grading size, therefore the shape of the basic piece doesn't change during the grading, the row is zeroed in the table. Piece grading in regard to the table data is drafted starting from the basic size, moving upwards and downwards in the scale size by size. The increment sign, indicating the grading direction, is set from smaller to bigger size.

Point parameters control
The increments are set only in End and Control intermediate piece points.
The status of the intermediate point is important for grading:
The increment should be entered in Control intermediate point (
) otherwise all the grading sizes will be limited to one point (zero increment).
Intermediate points (
) don't have increments, they move proportionally to the increment of the adjacent Control points during grading.
This feature of Intermediate points can be used for grading. For example, the increment of the shoulder (1) and lower (2) points of the back armhole is defined. The point in the armhole segment (3) can be automatically graded proportionally between two points (1 and 2), if it has the Intermediate point status. In case of a Control point, the increment should be entered, otherwise all the size lines will be limited to one point.
The function
- "Point/ Change point status" is used to change the point parameters.
Recommendation: When grading is finished, the status of Control intermediate point should be restored for the point (the actual increment is corrected, if needed). Otherwise, according to the Intermediate points characteristics, the point will move with the adjacent shifting points.
Functional points (
), as a type of Intermediate points, don't need grading. Their position in grading depends on the increments of adjacent points and their own functions (segment division in a given proportion or a fixed offset from a point).
The main functions of the Increment table
Operating modes in a coordinate system:
- Increments in inner and screen coordinate systems.
The increment values in an inner coordinate system can be defined in regard to the piece position in the base, in a screen system they are identified in regard to the screen axes position or the piece on the screen.
Piece grading types:
-.by size, by height/ or by fullness
Blocking of these modes is defined by the scale type of the working model:
- The length and fullness modes are switched off in the Size scale;
- The grading by fullness mode, is switched off in the Length size scale;
Piece grading modes:
[[[Image:embim3141.png|embim3141.png]]
- Four piece grading modes
1st: Equal increments for all sizes (for even grading)
2nd: Increments for each size (for uneven grading)
3rd: Increments with steps (for grading by size ranges)
4th: Grading by measurements
Increment types:
File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image024.jpg File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image026.jpg - Interdimensional and Total increment.
The increments, entered into the table, are either distributed between sizes (gradually from size to size) or summarily between extreme grading sizes (then the increment value is divided by the number of intermediate sizes).
Work with point groups functions :
File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image028.jpg File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image030.jpg File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image032.jpg File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image034.jpg - To Set a point group; To Add or Delete a point in a group; To Destroy a group.
The functions allow to create and correct point groups with even increments for simultaneous grading of different points of one or a few pieces.
Grading command:
File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image036.jpg - Perform grading according to selected parameters and values.
Process launch by selected values, with regard to the active operating modes of the table.
