Constructor:Contour modifications

From Julivi Help
Revision as of 10:25, 16 March 2015 by Pavel.Gordon (Talk | contribs) (→‎«Fox ear»)

Jump to: navigation, search

Step

The step (which is used for convenience of side aligning when stitching) is constructed based on the set seam width perpendicular to the specified side. In order to construct a seam step:

  • Select the SEAMS tab and embim2773.png button in this tab. The cursor will take the form ofembim2774.png. “Seams/Create a step” text menu items can also be executed.
  • Specify the section of the Cut (1), the seam step is to be constructed perpendicular to
  • Specify the second section (2), adjoining the first one. Then, a data input window will be displayed where the width of the seam on the first specified section is to be entered.
embim2775.png 
  • Press (“Yes”) button to confirm the data input and (“CANCEL”) to cancel.
embim2776.png 

On the variable seam section, the option should be activated (embim2777.png), and data are to be entered at the beginning and at the end of the section:

embim2778.png 

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image013.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created

Construct a corner

Corner   

If the seam allowance is to reproduce the piece outline precisely when pressing, a “corner” is constructed. This seam is used when constructing items without lining where seams are to look neater. A corner is created based on the specified seam width, the mirror-reflected forming side of the seam. In order to construct a seam corner:

  • Select the SEAMS tab and embim2779.png button in this tab. The cursor will take the form of embim2780.png.

      “Seams/Create a corner” text menu items can also be executed.

  • Specify the cut section (1), relative to which a seam corner is to be constructed mirror-reflected (1).
  • Specify the adjoining section (2). Then, a data input window will be displayed, where the width of the seam on the first specified section is to be entered.
embim2781.png   
  • Press (“Yes”) button to confirm the data input and (“CANCEL”) to cancel.
On the variable seam section, the option should be activated (embim2782.png), and data are to be entered at the beginning and at the end of the section:    
embim2783.png

When  [[Image:]] button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

«Fox ear»

 “Fox Ear” construction is a corner cut as per the set width parameters of adjoining sections. In order to construct a “Fox Ear”:

  • Select the SEAMS tab and embim2784.png button in this tab. The cursor will take the form of embim2785.png.   

“Seams/ ‘Fox Ear’” text menu items can also be executed.

  • Specify the first (1) section of the Cut and the second (2) adjoining section (clockwise).  

A window is displayed on the screen where values are to be entered instead of default ones:

embim2786.png
  • To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.
embim2787.png
Apart from the standard “Fox Ear” construction, other construction designs can be selected: cutout of an allowance on seam continuation and perpendiculars to seams; corner cutting of with the specified offset value; corner rounding with the specified offset value or with the specified radius.

On the variable seam section, the option should be activated (embim2788.png), and data are to be entered at the beginning and at the end of the section    

embim2789.png

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image013.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.


FEATURES:

 

 


                                    1. Sections (1, 2) are to be specified next to their common terminal point.


2. Sections are to be specified clockwise, especially on open inner outlines.  

Construct a cusp

Figured cutout

Construct a cusp on a corner

Constructing a cuff (fold)

Corner of a sleeve vent

Growing a contour

Cone

Processing a dart

Processing a box pleat

«Bezier» curve

Constructing corners and indents equal by height

Corner by a second piece

Equated indent by a second piece

Equated corner by a second piece

Draw (remove) a gash on a cut

Insert a gash at a cut

Point at a line crossing

Point at a normal to a line

Move a point along XY

Move a point in a direction by...

Aling a cut point vertically (horizontally)

Deleting indents, corners

Aling a dart point

Canceling a performed modification

Reconstructing a performed modification

Examples of modifications

Example №1

Example №2

Example №3