Constructor:Contour modifications
From Julivi Help
Contents
- 1 Construct an indention
- 2 Construct a corner
- 3 «Fox ear»
- 4 Construct a cusp
- 5 Figured cutout
- 6 Construct a cusp on a corner
- 7 Constructing a cuff (fold)
- 8 Corner of a sleeve vent
- 9 Growing a contour
- 10 Cone
- 11 Processing a dart
- 12 Processing a box pleat
- 13 «Bezier» curve
- 14 Constructing corners and indents equal by height
- 15 Draw (remove) a gash on a cut
- 16 Insert a gash at a cut
- 17 Point at a line crossing
- 18 Point at a normal to a line
- 19 Move a point along XY
- 20 Move a point in a direction by...
- 21 Aling a cut point vertically (horizontally)
- 22 Deleting indents, corners
- 23 Aling a dart point
- 24 Canceling a performed modification
- 25 Reconstructing a performed modification
- 26 Examples of modifications
Construct an indention
Construct a corner
Corner
If the seam allowance is to reproduce the piece outline precisely when pressing, a “corner” is constructed. This seam is used when constructing items without lining where seams are to look neater. A corner is created based on the specified seam width, the mirror-reflected forming side of the seam. In order to construct a seam corner:
“Seams/Create a corner” text menu items can also be executed.
- Specify the cut section (1), relative to which a seam corner is to be constructed mirror-reflected (1).
- Specify the adjoining section (2). Then, a data input window will be displayed, where the width of the seam on the first specified section is to be entered.
- Press (“Yes”) button to confirm the data input and (“CANCEL”) to cancel.

When button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.