Constructor:Order of working with a model

From Julivi Help
Revision as of 13:50, 10 February 2015 by Pavel.Gordon (Talk | contribs) (→‎Piece parameters” window)

Jump to: navigation, search

Loading the model for work

To load a model for work (i.e. from the server database to the working window of the program):

·        Select the button embim49.png in the vertical menu of the screen functions, or follow the options of “Object/ Work with the database” text menu

“Work with the database” window is displayed on the screen. embim50.png

·        Go to OBJECT tab, if it is not opened yet

·        Select a model from the list in the left part of the window

For convenient selection, the list of models can be sorted by one of the following parameters:

embim51.png: displays a list of all the models in the database

embim52.png: displays a list of objects by name (according to the assortment). When a name is selected, a list of models of a given type is displayed.

embim53.png: displays a list of size scales. When a scale is selected, a list of models of a given size scale is displayed.

embim54.png: displays a list of constructors' names.  When a last name is selected, a list of models of a given constructor is displayed.

embim55.png: Sorting the list by the last date of work with a model.

The list of models for a specific period is displayed according to the set dates.

When a line with the model name is selected, an internal model number is displayed above the list embim56.png


Below the list the last date of work with the model (any action done) is displayed embim57.png


When clicking the button embim58.png“Make an object working”, the model is loaded into the working window of the program and is called a Working model. The model code and its basic size is given at the top panel of the window. embim59.png

Loading a model to several working windows

If necessary, you can work with several models at the same time loading them into different working windows. In order to do so: • In “Work with the database” window load the first model into the working window by pressing the button. embim60.png At this time, the model code and its basic size are displayed at the top window panel. • Select another model from the list and press the button embim61.png “Make an object working in a new window”. Thus, the second model will be loaded to the second working window, etc.

The total number of opened model windows is displayed at the top panel in square brackets. It is possible to work with different models at the same time by switching between the windows. embim62.png In order to switch between windows, select “Window” tab in the text menu, where the list of working models is shown. The model, active for work at the moment, can be selected by clicking on the line. The selected line is marked with a check mark. embim63.png ATTENTION! If the model line is not active in the list, it means that the model is already loaded in one of the windows. embim64.png Modes for work with graded pieces embim65.pngdo not change over when switching to a different working window. It should be done manually.

Working model and active model

Working model and active model If you do not need to open a piece on the screen, you can work with a model directly in “Work with the database” window without loading the model into a working window. In order to do so, it is enough to activate a model in the list by selecting and highlighting a necessary line, and then view or change model parameters. The background of “Work with the database” window will turn yellow in color, and such model is called Active. You can return to Working object parameters with pressing the button embim66.png in the lower part of the window. This way, when work with models, a Working and Active object are distinguished. embim67.png

Working object is a model loaded into the working window at this moment. Active object is a model not loaded into the working window, but only selected from the list (i.e. it was activated for viewing, opening, copying its pieces, etc.)

Working through network (several workstations)

Working through network (several workstations) When a model already opened at a different workstation, is loaded into the working window, the following message is displayed on the screen:

embim68.png

YES button loads the model into the working window. NO button cancels loading the model. Without loading the model for work, it is necessary to check why the model is used at the other station (the message displayed gives the name of the workstation and the user’s last name). Then one should make a decision whether it is necessary to save pieces in someone else's working window and unload the model from the working window. After this, you can load this model for work at your workstation.

FEATURES When necessary, it is possible to work with different pieces of the same model, if the same model is loaded at several workstations. If work with the same piece at different workstations at once, the copy of the piece, which was saved last, will be stored in the database. Such arrangement of work can be useful if one constructor is work with Top pieces, while the other constructor is work with the Lining.

Order of work with a model

Once the program is launched, the general program window is opened, with only one active button embim48.png the vertical menu to open “Work with the database” window. It is used to load a model for work, and perform all organizational actions with models and pieces: creating a new model, opening pieces on the screen, copying pieces from other models, deleting and making additional grading  of pieces, changing parameters of a model and pieces, sending specification to print, etc.

“Work with the database” window has two tabs: OBJECTS and PIECES.

Work with pieces is done in PIECES tab, and work with models is done in OBJECTS tab (since model can consist of several objects: e.g. a suit consists of a jacket and a skirt).

In Constructor program the work is done separately with each object, and a model, even the one consisting of several objects, is compiled in Marker program and CAM programs. That is why all the text reminders of Constructor program (function names, floating prompts) contain the word “object”  instead of the word “model”, although for one-object models both names mean the same.

 

Opening pieces on the screen

After the model is loaded to the working window (by performing an action in the tab OBJECTS), in order to open working pieces on the screen, it is possible to switch to the tab PIECES without closing the window «Working with the database».

Order of opening of pieces

To open the pieces of the working model on the screen:

·        Open “Work with the database” window (Object/ Work with the database).

·        Go to PIECES tab, if it is not already opened. embim72.png

This window shows a list of pieces sorted by materials, below is the list of these materials.  On the right there is a window for piece preview and a size scale of the model. The panel of modes for work with the piece allows to open pieces on the screen, delete, do additional grading or copying, etc.

“Open pieces” mode embim73.png is switched on automatically when switching to PIECES tab.

The name of the currently selected action is shown above the panel of modes:


·        Select the piece from the list embim74.png

To select all pieces of the same material, put a check mark in the cell with the name of the material. embim75.png

To select several pieces, put a check mark in the cell with the name of the piece embim76.png, or double-click the line.

embim77.pngTo select one piece, click the line with a piece. The line is highlighted with blue, and the cell against the line is not marked.

The buttons for organizing work with the list of pieces are located above it:


embim78.png- select all pieces; embim79.png- cancel selection; embim80.png- cancel highlighting the lines with red (errors and others)

ATTENTION! If one piece is highlighted (with clicking on the line), while the second and the third pieces are selected with a check mark put in the cell, the work will be performed with the checked pieces, not with the highlighted piece.

embim81.png

When a piece is selected from the list, the right side of the window displays this piece's view:

embim82.png

Select the size of the piece to be opened. Basic size – the height of the piece is selected by default.

If you wish to select a different size from the table, put a check mark in the corresponding cell.

If you wish to select an entire row (or column), click the button with the name of size or height.


embim83.png


The button embim84.png- switches on all the size cells; the button embim85.png– cancels selection of all the size cells

·        Perform the command “Open piece” embim86.png

Select one of the two buttons above the command panel: embim87.png

- performing commands for selected pieces.

Opening pieces check marked in the cells, or opening one piece highlighted with blue. embim88.png

- performing a command for all the pieces in the list regardless selection.

Opening all the pieces of a model on the screen without preliminary selection.

A message about performance of the command is displayed on the screen. (Press the button embim89.pngor ОК in the window):

embim90.png

Close “Work with the database” window by pressing the button embim89.png or embim92.png.

If necessary, leave “Work with the database” window open and continue to work in it.

Since “Open piece” mode embim93.pngand basic size selection are set by default in “Work with the database” window, the general process of opening pieces looks as follows:

1) Open “Work with the database” window in PIECES tab;

2) Select pieces from the list with a check mark;embim94.png

3) Open pieces with pressing the button;embim95.png

4) Close “Work with the database” window.

All the opened pieces are displayed in the center of the screen for the working model.

After organization of the screen embim96.png(Window/ Organize the screen, or moving pieces by hand), you can start work with the pieces on the screen.

When pointing the cursor to the piece, its name, number and material of the piece are displayed on the lower panel


You can call on the screen different sizes, heights, or widths of a piece from the size window on the lower panel. embim97.png

embim98.png When an option embim99.pngis switched on, symmetrical pieces stored in the database as a half with a fold line, are displayed in full on the screen. embim100.png This mode for opening pieces is equal to the screen command for unfolding pieces (embim101.png“Window/ Screen actions with a piece/ Unfold symmetrical piece and is only used to view the piece.

FEATURES 1) If you wish to close “Work with the database” window automatically after opening the pieces, uncheck the special option embim103.png(”Setting/ Program parameters”, GENERAL/ Constructor tab)

2) To open a second copy of the piece on the screen, use the command embim104.pngof the vertical button menu while and holding down the <CTRL> key pressed on the keyboard.

The second copy of the piece is used to perform actions for superposed pieces, with their further “Reconstruction” (actions with untitled piece copies cannot be reconstructed)

3) If the piece does not have a basic size, a part of sizes or has no size, you will see the messages: “Piece has no size”, “Piece has no basic size or a part of sizes” in the window of external view.

Sorting the list of pieces

To make selection more convenient, the list of pieces can be arranged according to a number of parameters:

·        Sorting the list by selected materials

You can see the list of pieces for some materials only, if you unmark unnecessary cells in “Materials” window. This way, the list will only consist of selected materials.

embim147.png

·        Sorting the list by piece type embim106.png

MAIN - pieces are used for work in all JULIVI programs embim107.png- AUXILIARY - pieces are only used for work in Constructor program.

For example, you cannot see such pieces in Marker program.embim108.png - PERFORMANCE OPTION- pieces are sorted by performance options.

embim109.pngUNIFIED – sorting of output in the list of unified pieces

Type and Performance Option are set in embim110.png“Piece parameters” window (Pieces/ Piece parameters

Pieces are marked as Unified when copying links from other models embim111.png

·        Sorting the sequence order of pieces

The sequence order of pieces in the list can be changed according to the setting embim112.png:

Database – the sequence is arranged according to the list of names of the pieces composed in the Utilities program.

Creation – the pieces in the list are displayed by order of their creation within the model.  For example, when copying a large number of pieces from a different model, new pieces are displayed at the end of the list.

Piece parameters in the list

The list of pieces can provide information set in Piece parameters window (embim113.png) embim114.png

embim115.png SHORT NAME - additional short name of a piece input in “Utilities”. It is registered in piece layouts. For example: BC and TC are short names for bottom and top collar.

QUANTITY embim116.png- number of cut details per item.

OPTION embim117.png - option of piece performance not equal to 0.

Piece code is displayed at the very end of the line (if it was input for a given piece).

Information about parameters for each piece in the list is displayed in letter symbols:

FU or FD – piece arrangement on the screen: FU – face up, FD – face down.

S – the piece is symmetrical (with a given fold line).

U – the piece is unified (copied as a link from a different model).

RC – the piece has allowance for rough cut, it will be traced while drawing .

PRC– the piece has allowance for rough cut and “Draw piece and rough cut” parameter is switched on

Х – the piece has a parameter “Do not draw notches”

SHC – shrinkage coefficient is set for the piece

?????? – the piece has grading limitations. О – cannot be graded, S, H, W – can be graded by corresponding parameters: 1st position - size, 2nd - height, 3rd  - width

D – the piece was acquired from Designer program.

A – the piece is considered Auxiliary (is not displayed in Marker program)

Functions of “Open pieces” mode

 

When “Open pieces” embim118.png mode is activated, “Work with the database” window can be used to change parameters of the pieces, learn the history of their creation, send to print specifications of cut details and pieces.

It can also be used to open a Back-copy of the piece, or open pieces from a different model on the screen. embim119.png


Opening Back-copy of the piece

Sometimes, you can need a previously saved copy of the piece, or a Back-copy, instead of the latest copy of the piece from the database.

To open a Back-copy, open the piece after putting a check mark near the option “Back copy": embim120.png embim121.png

You can remove a Back-copy from the screen without saving (embim122.png - Window/ Remove piece without saving) or, on the contrary, save it instead of the latest piece copy (embim123.png- Window/ Saving pieces).

If you try to open a Back –copy for a piece that does not have one, the line with the piece name will be highlighted with red.

It is possible to open a Back-copy of a piece after performing the commands embim124.png- “Delete sizes”, embim125.png,embim126.png - “Size/height shift”, embim127.png- “Additional size grading”.

Back-copy is not created after performing the commandembim128.png- “Set material” or making changes to piece parameters (embim129.png and embim130.png in “Work with the database” window and on the screen), except when a symmetry line is set.

FEATURES embim131.pngBack-copy type depends on the mode, in which it was created.

The program has options for creation of Automatic and Manual Back-copies, depending on the settings selected (Settings/ Program parameters, GENERAL\Constructor tab) embim132.png

Аutomatic Back -copy is the last but one view of the piece saved with the command embim133.png.

Manual Back-copy is the view of the piece needed by the constructor and specially saved with the command embim134.png.

In other words, when opening a manual Back-copy, the copy you need, not the last but one copy of the piece will be opened.

"Piece parameters” window

Apart from opening piece parameters on the screen (embim135.png - Pieces/ Piece parameters), piece parameters can be changed without being opened on the screen with pressing the button embim136.pngin “Work with the database” window.

It is also possible to change parameters of another, Active model (with selecting it in the list, without loading it for work).

ADDITIONAL MODE embim137.pngWhen using the command embim138.pngwhile holding down the <CTRL> key, the screen displays a blank window called “Piece parameters” to input the name of a fake piece. This piece is not physically present in the model. Fake piece only exists in the list (to be reflected in the specification of pieces which are cut with the help of cardboard templates, without input of pieces into the laying out).

Window «Piece history»

Print specifications of cutting the parts

Print piece area

Finishing work with a model

Saving and deleting pieces from the screen

Finishing work with a model

Finishing work with several models