Constructor:Moving a section
Contents
Move a section along Х
The function allows to move a section along the Х axis.
To move a section along Х axis:
You can also follow the text menu points “Section/ Move along Х”.
- Specify the section (1). The window for input of data is displayed on the screen:
- Set the movement value in the input line. The movement direction is defined along the Х axis: to the right – positive value, to the left – negative value.
You can input values different in size manually (button
), or from the buffer (button
) .
Set the switch for shifting modes
to a necessary position:
The YES button: move a section with deformation of adjacent sections,
The NO button: move a section without any deformation.
- Press the YES button to confirm input of data, press CANCEL to cancel.
1) You can move several sections of the same piece at once.
To do so, after selection of the function hold the <Shift> key on the keyboard and specify the sections to be moved clockwise.
- The function is applicable to a group of superposed pieces. To do so:
- Create a group of pieces with the help of the commands for superposing ( the buttons
of the screen menu) - Perform the function according to the work description, while holding down the <Shift> key on the keyboard and specifying the sections to be moved on different pieces of the group
- Create a group of pieces with the help of the commands for superposing ( the buttons
Move a section along Y
The function for moving a section along Y axis is similar to the function Moving a section along Х
with the difference in setting the sign for movement: up – positive value, down – negative value (the button
or the menu points “Section/ Move a section along Y”).
Move a section in direction by
The function allows to move a section along the direction of a different section (for example, to move an indention section when correcting the seam length).
To move a section along the direction of a different section:
You can also follow the text menu points “Section/ Move a section in direction by…”.
- Specify the section (1) to be moved.
- Specify the directing section (2) next to the end setting the movement direction.
The window for input of data is displayed on the screen:
- Set the movement value in the input line.
The movement direction is set with a directing section (2): increase a section – positive value, decrease a section – negative value.
You can input values different in size manually (button
), or from the buffer (button
) .
Set the switch for shifting modes
to a necessary position:
The YES button: move a section with deformation of adjacent sections,
The NO button: move a section without any deformation.
- Press the YES button to confirm input of data, press CANCEL to cancel.
1) A place of click on the directing section is important, because positive direction of movement will be calculated based on the specified end.
2) Any other section of any piece contour as well as a section adjacent to the one to be moved can be used as a directing section
Move a section along a curve
The function allows to move a section of an inner contour along a curved section.
To move a section along a curve:
You can also follow the text menu points “Section/ Move along a curve”.
- Specify the section to be moved (1)
- Specify the section on the other contour (2), along the curve of which the movement will be performed.
The window for input of data is displayed on the screen:
- Set the movement value in the input line. The movement direction is defined according to the clock dial direction: move along the section clockwise – plus, move counter-clockwise – minus.
You can input values different in size manually (the [mk:@MSITStore:D:\!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\Лера\help_EN\Maestro.chm::/aaiae_aciuo_aaeeei_ii_aciaai_3.htm button] ), or from the buffer (button ).
- Press the YES button to confirm input of data, press CANCEL to cancel.
The function can be used to move inner contours (model lines, special sight sections - notches, etc.) along the piece contour curve.




