Constructor:Piece Grading

From Julivi Help
Revision as of 14:22, 5 March 2015 by Artur (Talk | contribs)

Jump to: navigation, search

 

Contour type

 

Contour purpose

 

Number in a piece

 

Notes





Working

1) Main contour, on the top of which a copy is automatically created - Cut contour, and a derivative contour of Finished view is created with the functions for seam construction

1

A compulsory element.

An initial cut view, excluding the commands for Cut design (indentionations, corners...)

2) Not available if Finished view is the main contour

-

-





Finished view

1) Main contour, from which Cut contour is constructed outwards with the functions for seam construction

1

A compulsory element

2) A Derivative contour constructed inwards from the main Working contour with the functions for seam construction.

1

An optional element

It is reconstructed when the main contour is changed

Cut

1) Main contour – Working:

Allowance for piece processing.

A derivative outer piece contour created automatically as a copy over the Working contour used for end piece processing: construction of indentions, cusps, bottom flap







1



A necessary element, since it is displayed for drafting in the layouts.



The contour for performing the commands for end piece processing: indentions, corners… (SEAMS tab)



It is reconstructed when the shape of the main contour is changed (Finished view or Working)

2) Main contour – Finished view:

Allowance for piece processing.

A derivative outer piece contour received from the Finished view with the help of the functions for seam construction and the commands for end piece processing

Grain line

Direction of the base thread

1

A compulsory element. Determines placement of the piece in the layout

Inscription

Location of the piece inscription: name, model, material, size, etc.

1

A compulsory element. Three inscription options (coordinated with the client)

Inner

Working lines of the inner elements of the construction (notches, pockets, etc.);

Lines for screen folding of the pieces and for modeling operations

Any

Not visible on pieces when drafting layouts.

Sight

Inner elements of the construction (pinholes, cuts)

Any

Visible on pieces when drafting layouts.

Text

Putting text, inscription of sizes and heights when drafting a layout.

Any

To draft inscriptions for cuts on pieces and marking lines on secondary pieces

Direction of rough cut

Same as grain line for rough cuts set in the window “Piece parameters”

1

Direction for making allowances on rough cuts set in the window “Piece parameters”

“Shadow”

A blocked copy of the last (or specially saved) version of each piece contour

By the number of contours

To compare piece view before and after the actions performed with the contours

Cut line

Line for performing automatic cutting

Any

Only for automatic cutting systems

Pinhole

Cross for performing an automatic pinhole

Any

Only for automatic cutting systems