Constructor:Piece Grading
The lines comprising a piece are represented with the contours of different types. It allows to separate their functions and specialize the contours by purpose.
The system contains the following contour types:
| Contour type | Contour purpose | Number in a piece | Notes |
| 1)
Main contour, on the top of which a copy is automatically created - Cut contour, and a derivative contour of Finished view is created with the functions for seam construction |
1 | A compulsory element.
An initial cut view, excluding the commands for Cut design (indentionations, corners...)
| |
| 2) Not available if Finished view is the main contour | |||
|
1)
Main contour, from which Cut contour is constructed outwards with the functions for seam construction
|
1
|
A compulsory element
|
|
2) A Derivative contour constructed inwards from the main Working contour with the functions for seam construction.
|
1
|
An optional element
| |
|
Cut
|
1) Main contour – Working:Allowance for piece processing. Aderivative outer piece contour created automatically as a copy
over the Working contour used for end piece processing: construction of indentions, cusps, bottom flap |
|
|
|
2) Main contour – Finished view:
| |||
|
Grain line
|
Direction of the base thread
|
1
|
A compulsory element. Determines placement of the piece in the layout
|
| Inscription | Location of the piece inscription: name, model, material, size, etc. | 1 | A compulsory element. Three inscription options (coordinated with the client) |
| Inner | Working lines of the inner elements of the construction (notches, pockets, etc.);
Lines for screen folding of the pieces and for modeling operations |
Any | Not visible on pieces when drafting layouts. |
| Sight | Inner elements of the construction (pinholes, cuts) | Any | Visible on pieces when drafting layouts. |
| Text | Putting text, inscription of sizes and heights when drafting a layout. | Any | To draft inscriptions for cuts on pieces and marking lines on secondary pieces |
| Direction of rough cut | Same as grain line for rough cuts set in the window “Piece parameters” | 1 |
Direction for making allowances on rough cuts set in the window “Piece parameters”
|
|
“Shadow”
|
A blocked copy of the last (or specially saved) version of each piece contour
|
By the number of contours
|
To compare piece view before and after the actions performed with the contours
|
|
Cut line
|
Line for performing automatic cutting
|
Any
|
Only for automatic cutting systems
|
|
Pinhole
|
Cross for performing an automatic pinhole
|
Any
|
Only for automatic cutting systems
|
Compulsory for the piece are the contours of Grain line (determines placement of the piece), Inscription (includes piece parameters) and the main contour (determines the piece shape): Finished view or Working cut. You can use both types of the main contour when working with the model.
Cut
contour is always derivative!
It is constructed and is based on the main contour, which can be
either Finished view or Working cut.