Plotter:Pieces Drawing

From Julivi Help
Revision as of 12:58, 25 January 2017 by ArtemReznikov (Talk | contribs) (Created page with "__TOC__ To go to the piece drawing mode, select Piece radio button in the upper left corner.The program window is viewed as below: 656x467px...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To go to the piece drawing mode, select Piece radio button in the upper left corner.The program window is viewed as below:

En plotter embim78.png

The pieces created in Constructor and Draftsman programs are sent for drawing on the plotter the same way as the markers.Pieces Drawing Letter K to the left from the piece name listed in the Queue list means designer’s pieces.

Remove

To remove the piece, select it in the list by left-clicking and click En plotter embim79.png.

En plotter embim80.png

The following dialog box is displayed:

En plotter embim81.png

If you click Selected, only the selected piece will be removed. Choosing All, you remove all the piece of the given model. Cancel virtual button helps to exit the dialog box without removing any piece.

Create the Markers Scheme

The program allows for creating schemes of pieces to be drawn on the plotter. Just click Create. Creating Pieces Schemes for Drawing window will be displayed.

En plotter embim82.png

Operations procedure for the window:

  • choose the models sorting type (By Size Scales, By Name, General List);
  • choose the size scale or the model name;
  • select the model by left-clicking it; to search the list, use the fast search line or the scrollbar;in Cloth Type list, select the required material then the names of the pieces that are linked with the given material are displayed in the list;
  • in the Pieces Names list, select the name or names of the pieces you want to include into the scheme.In Size and Height lists, select the required sizes and heights. The default size-height table is displayed it with all the boxes selected (i. e. all the size-height options are selected); basic size is highlighted in red; successive clicks on All virtual button either remove the selections from or place them into the size-height table; clicking on any size button either selects or deselects all the heights in the given size line; clicking on any height button either selects or deselects all the sizes in the given height column;
  • to relocate the selected pieces to the Names of Pieces for Drawing list, use one of the arrow buttons depending on your choice:

En plotter embim83.png - the selected pieces are relocated to the list of pieces for drawing in form of a graded nest. The pop-up prompt appears when you hold the cursor near the button for several seconds.

En plotter embim84.png

Pieces presentation in the graded nest scheme:

En plotter embim85.png

En plotter embim86.png - the selected pieces are relocated to the list of pieces for drawing one by one.

En plotter embim87.png

Pieces presentation in one by one scheme:

En plotter embim88.png

En plotter embim89.png - all the pieces of the selected material are sent to the list in form of a graded nest;

En plotter embim90.png - all the pieces of the selected material are sent to the list one by one;

If any mistake is made, you can remove a piece from the Names of Pieces for Drawing list by selecting it and clicking En plotter embim91.png. To remove all the pieces from the list, click En plotter embim92.png.

  • click En plotter embim93.png. Then, the Pieces Lay in the Scheme window is displayed.

Pieces Arrangement in the Scheme

A click on En plotter embim94.png displays the Pieces Lay in the Scheme window.

En plotter embim95.png

The pieces selected for the scheme are displayed considering the grainline. At the bottom of the window, the scheme length in cm is shown considering the paper width specified in Program Settings – Settings window.For more efficient paper utilization, you may select En plotter embim96.png checkbox. When the checkbox is selected, the pieces in the scheme may be turned 90 degrees relative to the grainline. Just tick the Turn Pieces checkbox and click En plotter embim97.png. Now, the pieces in the scheme are re-laid taking into account the permission to swap.

En plotter embim98.png

If you are happy with the created scheme and want to store it, click En plotter embim99.png. The Scheme Name dialog box is displayed with automatically generated scheme name.

En plotter embim100.png

You can change the name, entering the desired name from the keyboard. After clicking OK, the dialog box is closed and the created piece scheme with the specified name appears in the pieces schemes list in the main pieces drawing window.

En plotter embim101.png

By clicking Cancel, the Scheme Name dialog box is closed.

When clicking En plotter embim102.png, the pieces scheme creation mode is exited to the main pieces scheme drawing window without the scheme creation.

Contours types

Virtual buttons En plotter embim103.png located at the bottom of the window help to form the pieces scheme with the contours necessary for the plotting visible. Clicking on one of the virtual buttons makes a displayed contours either visible or invisible. Contours types:

En plotter embim104.png - seams

En plotter embim105.png

En plotter embim106.png - additional contours

En plotter embim107.png

En plotter embim108.png - sights

En plotter embim109.png

En plotter embim110.png - text contours

En plotter embim111.png

En plotter embim112.png - pinholes

En plotter embim113.png

En plotter embim114.png - cut lines

En plotter embim115.png

En plotter embim116.png - grainline

En plotter embim117.png

En plotter embim118.png - piece labelling

En plotter embim119.png