Plotter:Markers Drawing

From Julivi Help
Revision as of 12:57, 25 January 2017 by ArtemReznikov (Talk | contribs) (Created page with "__TOC__ To go the marker drawing mode, select Marker radio button in the upper left corner.The program window is viewed as below: 642x483px...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

To go the marker drawing mode, select Marker radio button in the upper left corner.The program window is viewed as below:

En plotter embim16.png

Here, you can queue the markers for drawing on the plotter and preview the markers on the screen.

Model Selection

To select a marker (markers) for drawing, first, choose the type of sorting in the sorting window (default setting is the type selected in the Program Settings - Screen - Main Sorting window).

En plotter embim17.png

By Names – in this mode, the Pattern Search of markers is used. To search, enter the first symbols of the marker name and the list of selected markers is formed.

En plotter embim18.png En plotter embim19.png

By Dates – search by date of the marker creation. The markers are stored in the list in the order of their creation for N days as is specified in Program Settings – General – View Markers for the Last… window. The last created marker is listed at the top.

En plotter embim20.png

By Models – when you select this type of sorting, the list of all the models the markers were created in will be displayed in the Models list. After the required model is selected, the names of this model markers will be displayed in the Markers list. If the list of models is longer than the window size, you can use the Scrollbar or the Search Line. Just enter several first symbols of the model name from your keyboard and the program will search for the model automatically.

En plotter embim21.png

By assortment – in this mode, choose the required product type from the dropdown Assortment Selection List opened using En plotter embim22.png virtual button. In the Models List, all the models from the selected Product Range will be displayed. After the required model is selected, the names of this model markers will be displayed in the Markers list.

En plotter embim23.png En plotter embim24.png

By Model Description – in this mode, choose the required model description from the dropdown Models Description Selection List opened using En plotter embim25.png virtual button. In the Models List, all the models with the selected Model Description will be displayed. After the required model is selected, the names of this model markers will be displayed in the Markers list.

En plotter embim26.png En plotter embim27.png

By Orders – in this mode, the markers are selected by the Order No. randomly or by the Pattern Search specified in the Orders List. Orders sorting window is adjusted in Program Settings – Screen – Orders Sorting. The orders in the list are stored for N days as is specified in Program Settings – Screen – View Orders for the Last… window. This mode is available provided the respective setting is selected in Settings – Marker – Planning (Orders Database) window of Server program.

En plotter embim28.gif

By Cutting Statements – in this mode, the markers are selected by Cutting Statements created in Order Planning Workstation program. This mode is available provided the respective setting is selected in Settings – Marker – Planning (Total Planning) window of Server program.

Marker Selection

After the required model is selected (by left-clicking in the list), the names of this model markers will be displayed in the Markers list. Using Materials Names List, you can additionally sort the markers names list by materials. Just open the list of materials and select one of them. In the Markers Names list, the markers of the selected material will be displayed.

En plotter embim29.png En plotter embim30.png

Then, in Markers list, select the marker name (by positioning the cursor on it and left-clicking). The selected marker line will be highlighted in blue and the information about this marker will be displayed in the upper right part of the window (length, width, overlay type, motif parameters, model, name, size-height, material, component parts).

En plotter embim31.png

Update List

In the upper right corner, near the marker parameters, there is En plotter embim32.png virtual button. This button allows for updating of the list of markers created by the designers without exiting the program window.

View Description

Below the marker parameters window, there is En plotter embim33.png virtual button. In the window to the left from the button or in the Marker Description window (by clicking En plotter embim34.png), you can read the description of the marker selected in the list that is created by Marker program.

En plotter embim35.png

En plotter embim36.png

Queue

To queue the selected marker for drawing, highlight the marker name in the list (by positioning the cursor on it and left-clicking) and click En plotter embim37.png virtual button. Now, the name of the selected marker is added to the Queue list. Optionally, the marker name may be added to the Queue list by double clicking the selected marker.

If you click En plotter embim38.png N times, the name of the highlighted marker is added to the Queue N times, too.

En plotter embim39.png

You can delete the marker name from the Queue list. Just highlight the marker name (by positioning the cursor on it and left-clicking) and click En plotter embim40.png virtual button (or double click the selected marker). Now, the name of the selected marker is deleted from the Queue list.

To add (or delete) the all the markers in the list to (from) the Queue list, click En plotter embim41.png virtual button. The pop-up prompts appear when you hold the cursor near the button for some time.

The markers positions in the Queue list show the sequence of their drawing.

En plotter embim42.png

The markers sequence in the queue may be changed. For this, select the marker in the queue and, clicking En plotter embim43.png, reposition the marker up the list (it becomes the first in the list).

Preview

When working with Queue list, you can preview the selected marker that will be displayed in the lower left part of the screen by highlighting its name and clicking Preview. Optionally, you can use Preview command in the pop-up menu (right-clicking the marker in the Queue).

En plotter embim44.png

En plotter embim45.png

Below the marker area, there is the status line with a scrollbar, mouse cursor coordinates and piece name the cursor is positioned on at the moment.

Using the scrollbar, you can view the marker which is longer than the screen window.

At the end of the marker, there is a red vertical line that indicates the location of the legend containing the information about the marker. If you position the cursor on this line and left-click on it, you then can move the legend to a new location. If you right-click, the menu that changes content depending on the menu item selected before is displayed. In this menu, you can change the marker legend view.

En plotter embim46.png En plotter embim47.png

Thus moved and changed legend will be linked with a new location after repeated left-clicking.

En plotter embim48.png

Draw detail

After clicking En plotter embim49.png virtual button, the markers will be sent for drawing in the order of their positioning in the Queue list. Optionally, you can use Draw command in the pop-up menu (right-clicking the marker in the Queue).

En plotter embim50.png

The marker length over the frame size will be divided into respective number of frames.

En plotter embim51.gif

The program checks the markers for readiness. If letter C appears on the left from the marker name in the Queue window, the marker is checked. If a marker is not finished or has overlapping pieces, it is highlighted in red in the list of drawing tasks. When drawing the marker queue, such marker is placed at the bottom of the list with all the finished markers on the top.

En plotter embim52.png

When viewing such marker, the program warning is displayed:

En plotter embim53.png and (or) En plotter embim54.png

Depending on your choice, you either confirm or cancel such marker drawing. If there are several such markers in the queue, the program warning is displayed for each of them. In case you need to plot several unfinished markers running, you can cancel the markers check function. For this, Don’t Check the Marker function in the pop-up menu is used (by right-clicking the faulty marker).

En plotter embim55.png

Then, in the queue, letter C (that stands for “Control”) disappears and the marker is highlighted in black instead of red.

En plotter embim56.png

To reactivate the checking function, select Check the Marker command in the pop-up menu.

En plotter embim57.png

If the marker drawing was interrupted, it may be restarted from the same frame where it was stopped. Just remember the number of the frame the drawing process was interrupted at. Then, after queuing the marker, set this number in Starting frameEn plotter embim58.png line (using the keyboard or arrow buttons En plotter embim59.png) and click Draw. Then, the drawing process will be restarted from the set location.

Stop

To stop the drawing of the current marker, click Stop virtual button.The dialog box where you either confirm the stop or not is displayed.

En plotter embim60.png

If you select Yes, the marker drawing will be stopped.

Stoppage

If you need to stop the queue drawing after a specific marker, you can use Stoppage command in the pop-up menu.

En plotter embim61.png

Then, to the left from the marker, letter S appears that means the plotter will stop after drawing this marker.

En plotter embim62.png

Stoppage command is canceled with Remove Stoppage command in the menu that pops up at right-clicking the marker.

En plotter embim63.png

Continue

After Continue button is clicked, the stopped marker drawing is continued from the place where it was interrupted (by clicking Stop).

Reset

If Reset virtual button is clicked when the marker is drawn, this marker drawing will be stopped and the marker will be removed from the Queue list.

Rewind

To rewind the paper to some set length or by one frame (depending on the plotter type) after the marker is drawn, you need to specify the offset value in Offset – Length window and click Rewind button.

Additional Parameters

If you need to offset the marker location in the drawing field relative to the plotter zero point, enter the offset value into the Shift – Width window from the keyboard.

The grainline location and its drawing in markers depend on the settings in the Program settings – Markers – Grainline length window.If you need to draw a marker without grainlines, you may leave the settings unchanged, and just deselect the Drawgrainline checkbox En plotter embim64.png.

En plotter embim65.png parameter is the paper width specified in plotter settings window: Program settings – Settings – Paper width.

When working with the cutting head, Drawgrainline checkbox is blocked, and Rotate checkbox is active. If this checkbox is selected, the marker beginning and the marker end are swapped.

En plotter embim66.png

Report

When Report button is clicked, a table where you can view the plotter operation report is displayed.

The Report For current marker includes the information about the selected marker drawing. In Successfully window, all the successful drawings of the selected marker with the reference date and time of drawing are displayed. In Not completed window, all the unsuccessful drawings of the selected marker are listed. Under these windows, the following information is displayed:

  • detaildrawing length (the length of the pen travel – ink consumption);
  • marker area (the marker area – paper utilization rate);
  • detaildrawing time (the time of the marker plotting).

En plotter embim67.png

The Report For current day includes information about the markers drawn during the current day. In the list of markers, you can see the marker name, date and time the drawing was started, drawing finishing time. Line length – the length of the pen travel (cartridge ink consumption control). Of paper – paper utilization rate in m.

Under the window, the following information is displayed:

  • total length of detaildrawing (total length of the pen travel, i. e. ink consumption per day control);
  • paper utilization rate (total paper consumption per day);
  • total time of detaildrawing (total time for markers drawing per day).

En plotter embim68.png

The Report For the Selected Period includes information about the markers drawn during the specified period of time. The period is specified in From (the period beginning) and To (the period end) fields. To set the dates, click En plotter embim69.png virtual button and choose the required year, month and day in the dropdown window.

En plotter embim70.png

The Markers list window in the Report for the selected period is analogous to the Markers list for the current day.

En plotter embim71.png

In Selection window, you can make additional selections for your report:

  • by all plotters (by all plotters in the system);
  • by current (by the plotter that is currently connected).

Print

You can print the plotter operation report. Click Print. The dialog box is displayed where you need to specify either the report will be viewed in full or short form, and choose the printer if several printers are connected.

En plotter embim72.png

The report is printed after you click Print in the dialog box.Clicking Exit, you close the dialog box.

Clicking Preview, you can view the selected report on the screen.

full form

En plotter embim73.png

This report may be printed from the preview window using En plotter embim74.gif virtual button.

En plotter embim75.png virtual button closes the preview window.

Help

Additional help as for the program operation is available by clicking En plotter embim76.png. The window that includes all the basic issues of the Draftsman Workstation program operation is displayed.

En plotter embim77.png

In any window of the program, position the cursor on an element and click F1 to display the prompt on the given function operation.

Exit

When Exit is clicked, Draftsman Workstation program operation is terminated.