Marker:Program
Contents
Selecting Program of the main menu in Automated Workstation «Mark», displays drop down menu, which contains several points.
Layout settings in the program Automated workstation "Mark"
For better convenience, the program has various options of layout window settings. Global settings are selected in the program Server JULIVI, more specific settings - directly in the program Automated Workstation «Mark».
Program settings are selected in the menu point Program-Setting.
It also has several tabs.
Tab "Databases"
This window is informational. It lists path to databases.
Tab "Colors"
This tab can be used for entering a required number of sets and select colors for filling sets, background, and fabric pattern. When the tab Colors is selected, the working window looks as follows:
Use the window Maximum number of sets in special mode with switched off control to set required number.
Add
Number of sets or a layout can be increased up to the maximum number, used by an enterprise. To do so, activate the window
, a new set Set N will be displayed in the window List of colors.
Filling
Using the scrolls (Red, Green, Blue)
filling color of each set in a layout can be determined.
To do so, required set must be highlighted with the left mouse button
, then use the scroll lines to achieve a required color in the window Filling
.
If the window Print
is activated for the set, it is possible to use scrolls to change the intensity of the grey color when this set is displayed in mini-marker.
Colors
Here it is possible to change Background color of the layout from grey to black by using a corresponding switch
.
If necessary, Fabric pattern color can also be set (when working with fabric pattern), by switching on a required option and using scrolls to get a required color.
If the option Differentiate fabric pattern with color is selected, different parts of a combined fabric pattern will be marked not by different types of lines, but with different colors.
type of a line
different colors
Tab "Layout"
When working in this mode, the working window looks as follows:
By using these options, it is possible to set additional functions, which help when forming a layout scheme.
Sound signal – when fixing an active piece, a sound signal is heard.
Do not show pieces at the top – if the options is switched on, when a piece is taken from the piece panel and the contour, where this piece was located, is not shown. With this option switched of, the piece panel will look as follows:
Highlight the closest piece from the top – with the option switched on, when the mouse cursor moves to a piece on the piece panel, piece contour is highlighted with white – this means that this piece can already be used for operations, in other words, it is not necessary to place the cursor directly over a piece contour (this is convenient for placing small pieces).
Highlight the closest piece from the bottom – with the option switched on, when the mouse cursor moves to a piece on the overlay panel, piece contour is highlighted with white – this means that this piece can already be used for operations, in other words, it is not necessary to place the cursor directly over a piece contour.
GERBER emulation. When the switch is activated, while placing pieces in a layout, methods and options of placing pieces used in system GERBER become available (especially for users, who worked with such system before): free placement of pieces to an overlay is performed with a single mouse click, to fix a piece - click the left and right mouse button at the same time or press the button <Space>. Pieces are also fixed on an overlay after being pressed.
Floating menu to the right corner. With this option switched on, floating menu displayed for a piece on the overlay panel is shown in the top right corner of the screen, instead of next to a piece.
Brief form. With the option switched on, the same option in the window Model (order) selection will be switched on by default. Brief form
Rotate pieces. The option is set once in the program Server JULIVI when setting up the complex on a factory; this option is meant for recording specific production for particular factories.
Rotate grain lines. The option is set once in the program Server JULIVI when setting up the complex on a factory; this option is meant for recording specific production for particular factories.
Correct width with hint. When working in the hint mode with a different width of the current layout and layout-hint, width of the hint is expanded/shrunk to the width of the current layout.
Do not scroll screen with pieces. By default, when an active piece is moved to the right edge of the overlay panel, the screen moves, in other words a piece is used as a scroll line. Switching on this option removes such a possibility.
Rotate pieces in automated mode. With this option switched on, a corresponding option for automatic piece layout for the constructor is switched on by default.
Hint in additional window. With this option switched on, layout-hint is displayed not on the overlay panel, but in the additional window in the top right corner of the screen. Hint
Show edge points for binding. If the option is switched on, when setting binding in layouts for fabric with pattern, check points without notches will be displayed as well as points with notches.
Show intermediate binding points. With the options switched on, intermediate points will be displayed for fabric with pattern.
Show slant in degrees. The lower data line when placing pieces to an overlay with grain line slant, the slant value will be displayed in centimeters with reference to the grain line and in degrees. Bottom dividing line
The functions:
- imitate operations of the program Mark of the JULIVI system similar to the system ASSISTA.
Expanded mode of piece selection. With this option switched on when working with a superblank, details captured fully or partially are selected to the superblank. Superblank
Displaying floating menu with Ctrl pressed. With the option switched on, floating menu on the overlay panel is displayed only when the Ctrl key is pressed.
Do not look for place for pieces in hint. With the option switched off, a piece which is being placed is automatically placed on a place it has in the layout-hint.
Do not show blanks on top. With the option switched on, created blank of a piece is not displayed on the piece panel.
Show comments in brief form. With this options switched on, the window of saved layouts in a brief form lists a comment next to the layout.
Fast placement on a part of an overlay. With the option switched on, pieces are placed on a portion of an overlay at once, without an option to select a particular portion.
Attention! Control over the number of placed pieces is performed by the user.
Maximum length. This field contains maximum length of a layout, with which the user can work in the program. If necessary, this parameter can be changed in the program Server JULIVI on the server-computer of the system.
Highlight touching points. If an option is switched on, places of touching points for pieces on the overlay panel will be marked with red, which allows to determine visually, to which side pieces can be pressed.
The field Precision allows setting sizes of a selected touching point between pieces — the bigger the field value, the bigger is the selection area.
Double click. Here the user can set time, during which two clicks on the mouse button are considered a double click.
Outthrust time. Time, during which the program searches a spot for a piece when working in an outthrust mode. If a piece is not placed during this time, it will remain active.
Default allowance. Allowance for layout.
Crossover for section. Crossover value for operations with sections is set.
Font size. Font value for piece title is set.
Show. Here an indicator, which is to be displayed on an information panel in the layout window, can be selected — either percentage of interspace, or percent of raw material usage.
Show layouts in list. Here an indicator, which will be displayed on the information panel, in the selection window of other layouts for the same model or material can be set — constant layouts or temporary copies.
Tab "Columns"
When working in this mode, the working window looks as follows:
Table form of the window of saved layouts is formed in this window. Table form
The right window has a minimal set of table parameters (by default layout name, sets, width, length, scrap percentage). The left window contains additional parameters for forming a table, which can be added or removed with the help of arrow keys. By using arrow keys up-down it is possible to set a required order of forming columns of a table form.
With a switched on function Show layouts in grid the window of saved layouts by dates and models (full form) is displayed as a table forme, with this option switched off - displayed as a brief form.
Tab "Automatic"
When working in this mode, the working window looks as follows:
In this window the user can set mode of compliance for sets and operations, calculation time for automatic layout, as well as storage of catalogues.
Tab "Tables"
When working in this mode, the working window looks as follows:
It shows values for gaps, seam allowances, allowances for super blanks, allowances for sections, permitted cutting for pieces, set in the program Server JULIVI used by the program.
The window Gaps shows various gap options in a layout. The number of the main, additional gap as well as a gap for automated machine is listed as well. Gap
Permitted cutting of pieces. Lists a gap, set in the program Server JULIVI with which pieces can be placed in a layout with crossover.
Pattern repeat distance – shows 8 options of pattern repeat distance to create piece blanks in the program.
Seam allowances – shows possible values of seam allowance for arbitrary cutting of a piece. The option, listed in the window Basic seam, is used by default. When a half of a piece is placed to an overlay, allowance is not set. Cut piece
The number of allowance for superblank while placing a layout is set in the window Basic allowance for super blanks. Superblank
Allowance for sections - shows possible allowance values for a section when creating a section layout. Create section
Tab "New"
When working in this mode, the working window looks as follows:
Default parameters for creating a new layout are adjusted here.
Basic overlay type – out of selected (in the program Server JULIVI) overlay types, the one most frequently used and chosen by default is set.
Show grain line – when a piece is place to an overlay, grain line is automatically displayed on it. Draft grain line
Show last line – overlay displays a line, which determines the current length of the layout by the last piece. Last line
Buttons for changing the scale – with this option switched on, the layout control panel has buttons for changing ratio of layout windows
. Change canvas
Same scale – if the option is switched on, ratio of the windows for a new layout are automatically regulated in such a way, that pieces on the piece panel and the overlay panel were of the same scale.
Sign pieces – sizes are written on pieces. Sign pieces
Basic - for automated machine – layouts, created for basic materials, are automatically assigned the parameter For automated machine.
Show notches – shows notches on pieces.
Show contours – shows inner contours.
Layout view – this switch determines what type of piece output to a layout is set as default (basic or special ). Basic type of piece output Special type of piece output
Intercrossed pieces – position of this switch determines, what to do with pieces, which become intercrossed when a hint is copied (mark them, delete, or place free).
Sort orders – the switch determines the order, in which list of orders will be sorted, when used in the window for creating a new layout.
Set list of models – the switch determines the basic sorting order of models for this window.
Inspect model readiness – with a switched on option, only models, marked by the constructor as ready for layout, are displayed by default.
Selecting layouts by several objects – with this option switched on, it is possible to select layouts, containing sets of several specified models, in the window of layout selection by models in brief form. Selection by objects
Sort sets in ascending order – sets, included in layout by default, are sorted on the piece panel in descending order. With this option switched on, they are sorted in ascending order.
Tab "Keyboard"
When working in this mode, the working window looks as follows:
Settings of «hot keys» can be changed here, in other words, keys, which are used to perform certain functions of the floating menus. This can be useful when changing a different system. To do so, highlight the name of the function in the window List of actions. Information about the hot key for the current action will be displayed in the window Keyboard. To change this information, click the left mouse button to activate the window Keyboard and press the key of the keyboard, which you wish to set as «hot». The window will display a line with required information and the button Delete will become active. To delete old information, highlight a required line and press the button Delete.
Tab "Print"
When working in this mode, the working window looks as follows:
Here default parameters for mini-marker are set. The top section of the window has options, set in the program Server JULIVI (printing grain lines, specification, title rotation, piece filling).
Pinhole size – size for marking pinhole on pieces. Measurement units are internal, based on the program, which are then re-calculated depending on the printer parameters.
Notch length – for pieces of mini-markers, also entered using internal measurement units.
Space on the left (cm) – width of indention from the left edge of the sheet.
Space on the top (cm) – width of indention from the top edge of the sheet.
Paper width (mm) – default value in this field is width of an А4 sheet. If necessary, a different value can be entered.
Font size – font size, used for printing mini-markers.
Line thickness – line thickness, used for printing mini-marker.
Font – font title, used for printing mini-marker.
Printer – if the system has several printers, select the one used to print mini-markers from the window below.
Position of the option Paper type depends on the parameters of a given printer. If the printer is used for web printing, scale can be adjusted with the help of the scale Printing scale.
Parameters of direct printer control are meant for controlling the printer EPSON directly from the program Mark. They are activated by pressing the button Switch on.
Tab "Text"
This window is used for servicing only by program developers.
Tab "General"
When working in this mode, the working window looks as follows:
This window is mainly used to view parameters set in the program Server JULIVI. It is possible to change several basic program parameters:
Cancel rollback (for speed)
Minimize layout
Do not copy information about order
Show orders for the last (time period)
Show layouts (by date) for the last (time period)
Sort pieces in the model window
Minimize layout – option to minimize layout window. Minimize task
Do not copy information about order – by default, when layout information is copied, the same is done with the order, to which this layout refers. With this option selected, order information will not be copied.
Search ignoring letter case. With this option switched off, search will be performed taking into account case of letters in the layout name, if this option is switched on, the search will be performed without taking case of letters into account.
Show orders for the last (time period) - here time period, during which orders were created, is selected.
Show layouts (by date) for the last (time period) – here the user can select time period during which layouts, displayed in the window Layouts - Saved (by date) - Last layouts, were created. Last layouts
Sort pieces in the model window – allows sorting pieces by area, or by specification Model list
By area:
By specification:
Help
Having selected the point Program-Help of the program menu, it is possible to use hints when working with the program.
A hint is displayed on the screen as a window, where required information can be read.
To display a hint for operations with a current command, place the cursor over the button or window and press F1.
Piece parameters
It is convenient to use the function Program- Piece parameters of the main program text menu, if an enterprise is always working with stripes and checks, and has set values of growing pieces for particular types of fabric pattern. View
ATTENTION! When using this function the order of the piece name database and careful input of intervals for pattern repeat distance is important.
When this function is selected, the working window is displayed on the screen
Piece names
The list of piece names of the database is located in the left section of the window Pattern repeat distance for pieces in layout
With the help of the drop down list of material groups Groups, located at the top, the user can select piece names for a particular material.
Blanks
Information about making a blank of this piece for different fabric pattern types can be bound with each piece name. To enter information about piece blanks, select the window corresponding with a required fabric pattern type (For horizontal stripe, For vertical stripe, For check). Enter information about used pattern repeat distance in the selected window. To do so, press the button Add to display data line in the window
To edit information about pattern repeat distance use the windows Pattern repeat distance length (mm), Pattern repeat distance width (mm). Minimal pattern repeat distance value is determined automatically. It equals 0 (for the first entered interval) or maximum previous interval (for all following intervals).
The button Delete is used to delete a previously set pattern repeat distance.
Pattern repeat distance
By using the button Pattern repeat distance, blank size for a specified fabric pattern size is displayed. When this button is pressed, the following window is displayed on the screen
Here it is possible to select blank size by length and width of piece in millimeters or in parts of pattern repeat distance. Switches On the left, on the right, From the top, From the bottom allow excluding growing pieces on one of the sides. The switch Rectangular blank allows creating a blank in a shape of a rectangle with sides equal to maximum values of piece length and width.
To confirm the information, press the button Ready.
The button Cancel cancels the function performance.
So blank size is determined for all entered intervals of pattern repeat distance.
After this information is entered, the following takes place: when creating a layout for a patterned fabric, pattern repeat distance of which is included in one of the specified intervals, if a model has a piece with this name, it is automatically used as blank with specified growing values by length and width.
Cut paired pieces in different direction
When the option Cut paired pieces in different direction is selected, it is possible to set additional information for automatic cutting for a particular piece name - cutting paired pieces in different directions.
After the option is switched on for one piece, this parameter can be set for all pieces by using the button For all.
About the program
When the point of the main menu Program - About the program is selected, information about the program version, development company and contacts (telephones, e-mail) is displayed on the screen.
To exit the window, press Exit
Exit
To exit the program use the menu Exit of the main program menu.








































