Constructor:Creating groups of superposed patterns

From Julivi Help
Revision as of 22:25, 27 February 2015 by Pavel.Gordon (Talk | contribs) (→‎"Rolling” of pieces)

Jump to: navigation, search

The commands for screen superposition allow to create temporary screen groups of pieces, to check conjugation and configuration of lines between pieces and their parts. Besides, almost all the program functions cannot only be applied to one piece, but also groups of superposed pieces.

The panel for screen superposition of pieces is represented with the commands embim881.png, as well as embim882.png.

Commands for piece superposition

Superpose piece points

To superpose two pieces in one point:

·        Select the button embim883.png in the screen functions menu. The cursor will be changed to embim884.png. You can also follow the menu points “Window/ Superpose pieces/ Superpose piece points”.

·        Specify the point (1) on the first fixed piece

·        Specify point (2) on the second, unfixed piece

The pieces will be moved to one point (1), shifting without any turnings of pieces.

embim885.png

·        To ungroup pieces, select the button embim886.png of the screen menu

This button is always activated when the superposition group is displayed on the screen.

Superpose piece sections

To superpose two pieces by sections:

·        Select the button embim887.png in the screen functions menu. The cursor will be changed to embim888.png. You can also follow the menu points “Window/ Superpose pieces/ Superpose piece sections”.

·        Specify the first point (1) on the first fixed piece

·        Specify the first point (2) on the second, unfixed piece

·        Specify the second point (3) on the first fixed piece

·        Specify the second point (4) on the second unfixed piece

The pieces are superposed in such a way that only the first pair of points (1+2) matches exactly.

The second fixed point (3) only sets direction along the section for superposition, and if the lengths of superposed sections are different, the points of the second pair (3 and 4) will not match.

embim889.png

·        To ungroup pieces select the button embim890.png of the screen menu. This button is always activated when the superposition group is displayed on the screen.

 

Superpose ends of sections

To superpose the pieces by the ends of the sections:

·        Select the button embim891.png in the screen functions menu. The cursor will be changed to embim892.png. You can also follow the menu points “Window/ Superpose pieces/ Superpose ends of piece sections”.

·        Specify the end of the line of the fixed piece next to the end point (1).

·        Specify the end of the line of the second unfixed piece next to the end point (2).

The ends of the sections are superposed along the vector direction. On curved sections, the pieces are superposed as long as their configuration matches.

embim893.png

To ungroup pieces select the button embim894.png of the screen menu

This button is always activated when the superposition group is displayed on the screen.

Superpose ends of sections at their extension

To superpose the pieces by the ends of sections at their extension:

·        Select the button embim895.png in the screen functions menu. The cursor will be changed to embim896.png . You can also follow the menu points “Window/ Superpose pieces/ Superpose ends of sections at their extension

·        Specify the end of the line of the fixed piece next to the end point (1).

·        Specify the end of the line of the second unfixed piece next to the end point (2)

The lines of the moved group are superposed at extension of the fixed line.

embim897.png

·        To ungroup the pieces select the button embim898.png of the screen menu. This button is always activated when the superposition group is displayed on the screen.

"Rolling” of pieces

The function allows to “roll” (superpose in specified points by turns) the sections of the same group along the sections of a different group, to check conjugation of different items of the garment.

For example, superpose body pieces (first group) and sleeve pieces (second group), compile these groups in a common point, and rotate sleeves along the armhole, inspecting conjugation on the sections of facing.

The function consists of two parts:

1.     Setting rolling parameters: selection of fixed and rolled line;

2.     Rolling process: specification superposition places between groups one by one

 

Setting of rolling parameters

 

·        With one of the superposition commands create the first group of pieces embim899.png(for example, front, side, back) and the second group of pieces (for example, front sleeve and elbow sleeve).

·        Select the button embim900.png in the screen functions menu. The cursor will take the view embim901.png without an arrow

·        In the first, fixed group specify the section, along which the pieces must be rolled,

 

Holding down the <SHIFT> key on the keyboard, you can specify several sections at once (1,2,3) IN CLOCKWISE DIRECTION. The sections are highlighted with color (or example, an entire armhole).

·        In the second, unfixed group, specify the section to be rolled.

Holding down the <SHIFT> key on the keyboard, you can specify several sections at once (4,5) IN CLOCKWISE DIRECTION. The sections are highlighted with color (or example, an entire sleeve head).

embim902.png

·        Specify the point (6) for superposition on the fixed line (in the first group of pieces)

·        Specify the point (7) for superposition on the rolled line (in the second group of pieces)

 
embim903.png

 

·        The window for selection of the direction for group superposition is displayed on the screen.

embim904.png

embim905.png- match of direction for group notches; embim906.png- opposite direction for group notches.

Select one of the direction buttons. At the same time the groups are superposed with each other, and you can inspect conjugation of armhole and sleeve head shape visually.

  embim907.png

The cursor will be changed to embim908.png (with an arrow), and you can perform the second part of the function.

Specify the place for superposition

For further inspection, specify a fixed line in the necessary place (A, B, C, D) one by one. The rolling line will be laid on it along the tangent (as much as the shape of both lines can match in a given point), taking into account the distance from the point of group superposition.

embim909.png embim910.png

Switch for direction allows to perform superposition of the pieces in a necessary manner, depending on the piece arrangement on the screen

 
embim911.png
Matching direction of notches
embim912.png
 
Opposite direction of notches

To stop the function, ungroup the pieces with pressing the button embim913.png

If there are several different groups on the screen, specify any piece of the necessary group.

FEATURES

·        The function is not only performed for the groups of superposed pieces, but for free pieces as well.

·        Rotation of piece for superposition is performed both with screen rotation and sorting in the database.

·        When the length limit for the rolled section is achieved, there will be no piece movement

ADDITIONAL MODE

1) When performing the function, holding down the <CTRL> key on the keyboard before selecting the command button, you can specify the areas to superpose by previously specified lines.

For example, you can specify the fixed and rolling lines, then perform the other program functions, and return to “Rolling” again only specifying the places for superposition of the lines.

2) When performing the function, you can specify fixed and rolling sections holding the <ALT> key on the keyboard. In this mode, when one section is specified, the other sections on the same tangent to it are highlighted.

For example, after one section of an armhole is specified, the entire armhole is highlighted in the pieces of the group.

Specifics of working with superposed pieces

Deleting and cancelling actions with groups

Cancelling the last command for a group

Ungrouping pieces