Constructor:Increment table

From Julivi Help
Revision as of 11:46, 23 March 2015 by Pavel.Gordon (Talk | contribs) (→‎Switch to a different grading properly: by heights, by corpulence values)

Jump to: navigation, search

Piece grading is performed by entering increments in piece points.  For grading select a piece point, enter an increment value in the table and use a grading command.

     To open the Increment Table select the button embim3120.png in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the program text menu. The Increment Table will appear.

embim3121.png

Increment Table Functions

The working window "Increment" includes a range of functions and a table of increment values. In the left column the increment values for the X axis are displayed, the right column features increment values for the Y axis.

Depending on the selected grading  type( by sizeembim3122.png,  by height embim3123.png, by fullnessembim3124.png), the table displays the list of sizes, lengths and fullnesses of the working model:

 embim3125.png

     The increment value of graded pieces in a particular point is displayed, if you move the cursor and left click it.

     The basic size is an original grading size, therefore the shape of the basic piece doesn't change during the grading, the row is zeroed in the table. Piece grading in regard to the table data is drafted starting from the basic size, moving upwards and downwards in the scale size by size.  The increment sign, indicating the grading direction, is set from smaller to bigger size.

 embim3126.png


Point parameters control

     The increments are set only in End and Control intermediate piece points.

     The status of the intermediate point is important for grading:

The increment should be entered in Control intermediate point ( embim3127.png) otherwise all the grading sizes will be limited to one point (zero increment).

Intermediate points ( embim3128.png) don't have increments, they move proportionally to the increment of the adjacent Control points during grading.      This feature of Intermediate points can be used for grading. For example, the increment of the shoulder (1) and lower (2) points of the back armhole is defined. The point in the armhole segment (3) can be automatically graded proportionally between two points (1 and 2), if it has the Intermediate point status. In case of a Control point, the increment should be entered, otherwise all the size lines will be limited to one point. The function embim3129.png - "Point/ Change point status" is used to change the point parameters.

embim3130.png

Recommendation: When grading is finished, the status of Control intermediate point should be restored for the point (the actual increment is corrected, if needed). Otherwise, according to the Intermediate points characteristics, the point will move with the adjacent shifting points.       Functional points (embim3131.png), as a type of Intermediate points, don't need grading. Their position in grading depends on the increments of adjacent points and their own functions (segment division in a given proportion or a fixed offset from a point).   

The main functions of the Increment table

Operating modes in a coordinate system:

embim3132.png embim3133.png - Increments in inner and screen coordinate systems.

The increment values in an inner coordinate system can be defined in regard to the piece position in the base, in a screen system they are identified in regard to the screen axes position or the piece on the screen.

Piece grading types:

embim3134.png embim3135.png embim3136.png -.by size, by height/ or by fullness

      Blocking of these modes is defined by the scale type of the working model:

embim3137.png - The length and fullness modes are switched off in the Size scale;

embim3138.png - The grading by fullness mode, is switched off in the Length size scale;

Piece grading modes:

 embim3139.png embim3140.png embim3141.png embim3142.png - Four piece grading modes

1st: Equal increments for all sizes (for even grading)

2nd: Increments for each size (for uneven grading)

3rd: Increments with steps (for grading by size ranges)

4th: Grading by measurements

Increment types:

embim3143.png embim3144.png - Interdimensional and Total increment.

The increments, entered into the table, are either distributed between sizes (gradually from size to size) or summarily between extreme grading sizes (then the increment value is divided by the number of intermediate sizes).

Work with point groups functions :

embim3145.png embim3146.png embim3147.png embim3148.png - To Set a point group; To Add or Delete a point in a group; To Destroy a group.   

The functions allow to create and correct point groups with even increments for simultaneous grading of different points of one or a few pieces. Grading command:

embim3149.png - Perform grading according to selected parameters and values.

Process launch by selected values, with regard to the active operating modes of the table.

Special functions of the Increment Table

Functions of Increment Copying: embim3150.png embim3151.png embim3152.png - Full increment copying or separate copying by Х, У coordinates. The functions enable copying the increment value from the selected point to a few other points either fully or by one coordinate (X or Y). Increment zeroing modes: embim3153.png embim3154.png - Increment zeroing by all or current sizes.

Point regrading functions:

embim3155.png embim3156.png - Point regrading between sizes and for full piece grading.

The functions allow even distribution of the current increment in the point between two selected sizes or for full grading at once.

      Additional functions:

embim3157.png - Increment calculation in the set direction.

The point increment moves along the line, selected on the screen (tangentially in the end point).

embim3158.png - Increment calculation by two adjacent points.

Proportional calculation of the point increment between the increments of two selected segment points.


     Table completion functions:

embim3159.png - Fill in the table with initial increments

embim3160.png - Destroy the point link (the recent increments are cleared in the table)

embim3161.png - Move the values from the value input box by Х, У into the table cells

embim3162.png - Change the increment sign by Х, У

embim3163.png - Insert the increments by Х, У from the program "Calculator"

embim3164.png embim3165.png - Save the increment in the buffer and calculate the current increment from the buffer

Increment table movements on the screen

To move the table window to a suitable place, do the following:

·         Click the upper panel of the table window.

·         Holding the mouse button, move the table to the suitable place.

·         Release the mouse button to fix the window position.

During next display, the table will appear in the set position, unless the program has been restarted.

Work with the Increment Table

     Main working plan:

1.      Open the Increment table

2.      Select the grading feature: grade

3.      Select the grading mode: even, unven, with steps, by measurements

4.      Select the increment type: interdimensional or total

5.      Create point groups

6.      Select a grading point

7.      Enter an increment of the selected point

8.      Perform grading

9.      Move to the next piece points

10.  Move to drop, spec grading

11.  Close the Increment table

12.  Save the piece

Open the Increment table

To launch the Increment Table window, select the button embim3166.png in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the text menu.

 The Increment table will be displayed:

embim3167.png

Grading feature choice

For piece grading by size, by length or by fullness choose  the button embim3168.png, embim3169.png, orembim3170.png of the corresponding grading feature should be switched on.

By size grading is turned on by default, the mode is enabled automatically, when the table is launched. If only  by size grading is applied, length or by fullness features are blocked.

Grading mode choice

The grading mode is enabled by choosing one of the four buttons of the table embim3171.png embim3172.png embim3173.png embim3174.png, for even grading,

unven grading, grading with steps, by measuring of the program "Size base".

1st mode embim3175.png: Even increments for all sizes

Building of even piece grading, one increment value is entered for all sizes.

Interdimensional increments embim3176.png: the value is set between the sizes, from small to big size.

embim3177.png

Total increments embim3178.png: the value is set summarily between extreme grading sizes and is evenly divided by the number of intermediate sizes

embim3179.png

2nd mode embim3180.png: Increments for each size (for uneven grading)

Creating uneven grading, different increment values are entered for each size.

embim3181.png

3rd mode embim3182.png: Increments with steps (for grading by size ranges)

Creating grading by size ranges, with increment steps.

Interdimensional increments embim3183.png: the increment value is set between sizes in the selected range, from small to big size.

embim3184.png

Total increments embim3185.png: the value is set summarily between extreme range sizes and is evenly divided by the number of intermediate sizes inside each range.

embim3186.png

     To set increment steps, select the grading range limits by clicking the row with the required size, starting from the outer size of the first range. The row choice is canceled by right-clicking the mouse. The selected rows are highlighted.

     Don't select the very first row of sizes, but select the bigger size row of the first range (as the smaller size is always the upper limit of the first range).

embim3187.png

        Functions of work with ranges:

embim3188.png - Set the increment ranges

embim3189.png   - The list of increment range variants

embim3190.png - Clearing the lists of increment range variants.

 

A few range variants can be created for a single model grading.

Having created the first range (as described above), in order to enter a new range, select the command embim3191.png and enter the limits of increment steps. This variant is described in a list of ranges asembim3192.png. <cenetr> embim3193.png </center>

4th mode embim3194.png: Grading by measurements

Additional grading range, in which the abbreviations of measurements are entered instead of numerical values (Bs – Breast semicircumference, Sw – Shoulder width etc.).

The work in this mode is described in detail in the chapter about Increment table special functions.

Creating groups of points

Different piece points can have identical increment values. In this case they can be merged into groups, and the increment value can be set for the whole group at once.

The point groups are created separately for grading by size, length or fullness.

To create a point group:

·         Select a button in the table embim3195.png. The cursor will change like this embim3196.png.

·         Select the points of one or a few pieces in turns, for which one increment value should be entered. The selected points are highlighted.

·         Finalize the choice by right-clicking the mouse button and repeat the steps for all other points.

 If the wrong point has been selected for the group, use the commands embim3197.png of the screen menu to cancel the operation.

ADDITIONAL MODE

 

 

A point group can be set by highlighting the capture area in the screen.               Do the following:

After selecting the function button embim3199.png press (without holding) the <SHIFT> key on the keyboard.

·         Holding the left mouse button, move the cursor across the screen, highlighting the area around the points of one group.

·         Release the mouse button to fix the area.

Commands for work with point groups:

1) Adding new points to an old group:

·          Select a button in the table embim3200.png. The cursor will change like this embim3201.png.

Select any point in the group.

·         Select a point or a few points in different pieces, which have to be included in the group.

·         Finalize the points choice by right-clicking the mouse button.

 

2) Deleting the point from the group:

·         Select a button in the table embim3202.png. The cursor will change toembim3203.png.

·         Indicate a point or a few points to be deleted from the group.

·         Finalize the points choice by right-clicking the mouse button.

 

3) Destroying the point group:

·         Select a button in the table embim3204.png. The cursor will change to embim3205.png.

·        

ADDITIONAL MODE

 

Select a point in the group to be deleted

If you select a point, holding the <CTRL> key,

all the groups of the selected piece will be destroyed (but

by a single working grading feature: grading by size, length or fullness).

If the groups are created for a few pieces, they'll be destroyed in the selected piece, but preserve in the others.

 

 

ATTENTION! If a piece and its copy ("no name" or with a name) are in the screen, and there are point groups, both pieces will be graded simultaneously.

It helps to grade "common" points of Top and Lining simultaneously, without creating special point groups for them.  

If such parallel grading isn't needed, only one piece should be displayed in the screen. If point groups aren't created, the pieces will grade independently.

Entering increment of the selected point

            To enter increments do the following:

·         Indicate grading point in the piece.

ATTENTION! Work with the Main contour points (Working and Ready View), the secondary contour will be changed automatically. If you try to select the secondary contour Cut, nothing happens in the Action table.

 

·         Input the increment value separately for X and Y coordinates accordingly in the left and right windows of the lower part of the table.

Press the button embim3207.png to transfer this value into the table cells.

embim3208.png

You can also click the button with the required size or enter the values separately in each cell to fill in the table after entering the data in the lower windows. Click in the required cell and enter the increment value.

The value is entered by the selected mode and grading type (interdimensional and total).

ATTENTION! In all the grading modes embim3209.png embim3210.png embim3211.png embim3212.png the sign of the entered values ("+" or "-") sets the direction of the grading. The increment sign by X (left column) or by Y (right column) is set by the coordinate axes, from smaller to bigger.

     Table completion functions:

embim3213.png - Fill in the table with initial increments

After entering the new increments in a previously graded point, this function can help to view the initial increments in the point by restoring the previous table data view.

embim3214.png - Destroy the point link (the recent increments are cleared in the table)

The table data are cleared, the increment of the last selected point isn't displayed.

embim3215.png - Change the sign of the entered increment in Х or У column.

embim3216.png - Save the increment in the inner buffer of the table; embim3217.png - Take the values from the buffer table to copy the increments from point to point.

embim3218.png - Paste into the column Х or У the increment values, saved in the buffer of embim3219.png "Seams algebra" and "Calculator". These data are used in the 2nd grading mode only (by size).

For example, to grade the pieces by the Measurements sheet, enter the actual Sheet data in the "Calculator" tab embim3220.png "G", in the other tab "Н" calculate the increment, using the function f6, and save the data in the buffer embim3221.png. The table command embim3222.png enters these data in the required column (Х, У).

embim3223.png

Performing grading

     To grade by input increments select the commandembim3224.png.

The point will get increment by the grading modes in the table, the grading by the current feature (grading by size, length or fullness) will be displayed.

During grade piece grading embim3225.png only grade grading is displayed, during drop grading embim3226.png only drop grading is displayed, the same refers to spec grading.


ADDITIONAL MODE

 

To display full grading use the command embim3228.png,

                                                           holding the <CTRL> key.

Switch to work with other piece points

By indicating other points and point groups of the piece, all the required increment values are entered by the grading schemes.

Transfer to a different increment feature: length, fullness

     For models of the length scale move to   grading by size mode, by turning on the button embim3229.png and repeat the whole grading cycle.

     Then, for models of the fullness scale, move to grading by fullness, by turning on the button embim3230.png, and repeat the whole grading cycle.

Close the increment table

Save graded piece

Grading order in different grading modes

Special modes of the increment table

Special functions

Coping increments

Nullifying increments

Regrading point increments

Increment in a set direction

Increment, calculated by two adjacent points

Grading pieces in screen coordinates

Grading of a piece, rotated on the screen

Grading in rotated coordinate axes

Grading pieces by measurement properties

Grading order by measurement data

Specifics of grading by measurement data