Constructor:Basic information about contours

From Julivi Help
Revision as of 10:37, 5 March 2015 by Vladislav (Talk | contribs) (→‎Concept of the main contour of a piece)

Jump to: navigation, search

Concept of the main contour of a piece

It is possible to use two types of the main contour in the program – Finished view or Working (in other words, Cut in its initial view, without piece processing constructions – indents, corners, bottom flaps, etc). It is possible to set seam allowances in outward direction from the main contour Finished view, creating a derived (dependent) Cut contour. And vice versa, it is possible to set seams in inward direction from the main Working contour, creating a derived contour Finished view. Another contour - Cut - dependent on the main contour is automatically created over the Working contour, and copies it in any actions, except functions of the SEAM tab (commands of the final piece processing, meant specifically for the Cut contour) ATTENTION! It is possible to differentiate the main piece contour on the screen. Contour of the Title point is Yellow for the Finished view, Pink - for the Working contour (according to the color setting “Contours” for main contours) Work with a piece is done on the main contour (points are shifted, lines are deformed…), and derived contour is automatically reconstructed as per the main contour. An exception to this is the tab SEAMS, used specifically for the derived contour Cut. An emblem of a given construction is created on the screen, by clicking the emblem it is possible to delete or reconstruct the construction according to new parameters. For example, division of two contours: Cut and Working contour (it maintains view of the initial cut state, without an indent) is done in a piece with the Working contour as the main one when creating an indent (function Embim1582.png «Seams/ Create indent»):

Embim1583.png

When the shape of the Working contour is changed, Cut contour will be automatically reconstructed along with creating an indent, and it will not need to be created again from the new, changed shape of a piece.

Embim1584.png Functions of the tab SEAMS can be performed right on the main contour, construction sections are a part of the main contour excluding modification reconstruction (as with derived contour). Two options for working with the main contour are seen on the example of processing a vent of the top sleeve:

Embim1585.png

Title contour