Constructor:Creating groups of superposed patterns
The commands for screen superposition allow to create temporary screen groups of pieces, to check conjugation and configuration of lines between pieces and their parts. Besides, almost all the program functions cannot only be applied to one piece, but also groups of superposed pieces.
The panel for screen superposition of pieces is represented with the commands
, as well as
.
Contents
Commands for piece superposition
Superpose piece points
To superpose two pieces in one point:
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Superpose pieces/ Superpose piece points”.
· Specify the point (1) on the first fixed piece
· Specify point (2) on the second, unfixed piece
The pieces will be moved to one point (1), shifting without any turnings of pieces.
· To ungroup pieces, select the button
of the screen menu
This button is always activated when the superposition group is displayed on the screen.
Superpose piece sections
To superpose two pieces by sections:
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Superpose pieces/ Superpose piece sections”.
· Specify the first point (1) on the first fixed piece
· Specify the first point (2) on the second, unfixed piece
· Specify the second point (3) on the first fixed piece
· Specify the second point (4) on the second unfixed piece
The pieces are superposed in such a way that only the first pair of points (1+2) matches exactly.
The second fixed point (3) only sets direction along the section for superposition, and if the lengths of superposed sections are different, the points of the second pair (3 and 4) will not match.
· To ungroup pieces select the button
of the screen menu. This button is always activated when the superposition group is displayed on the screen.
Superpose ends of sections
To superpose the pieces by the ends of the sections:
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Superpose pieces/ Superpose ends of piece sections”.
· Specify the end of the line of the fixed piece next to the end point (1).
· Specify the end of the line of the second unfixed piece next to the end point (2).
The ends of the sections are superposed along the vector direction. On curved sections, the pieces are superposed as long as their configuration matches.
To ungroup pieces select the button
of the screen menu
This button is always activated when the superposition group is displayed on the screen.
Superpose ends of sections at their extension
To superpose the pieces by the ends of sections at their extension:
· Select the button
in the screen functions menu. The cursor will be changed to
. You can also follow the menu points “Window/ Superpose pieces/ Superpose ends of sections at their extension
· Specify the end of the line of the fixed piece next to the end point (1).
· Specify the end of the line of the second unfixed piece next to the end point (2)
The lines of the moved group are superposed at extension of the fixed line.
· To ungroup the pieces select the button
of the screen menu. This button is always activated when the superposition group is displayed on the screen.
Rolling” of pieces
The function allows to “roll” (superpose in specified points by turns) the sections of the same group along the sections of a different group, to check conjugation of different items of the garment.
For example, superpose body pieces (first group) and sleeve pieces (second group), compile these groups in a common point, and rotate sleeves along the armhole, inspecting conjugation on the sections of facing.
The function consists of two parts:
1. Setting rolling parameters: selection of fixed and rolled line;
2. Rolling process: specification superposition places between groups one by one
Setting of rolling parameters
· With one of the superposition commands create the first group of pieces File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image001.gif(for example, front, side, back) and the second group of pieces (for example, front sleeve and elbow sleeve).
· Select the button File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image002.gifin the screen functions menu. The cursor will take the view File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image003.gifwithout an arrow
· In the first, fixed group specify the section, along which the pieces must be rolled,
Holding down the <SHIFT> key on the keyboard, you can specify several sections at once (1,2,3) IN CLOCKWISE DIRECTION. The sections are highlighted with color (or example, an entire armhole).
· In the second, unfixed group, specify the section to be rolled.
Holding down the <SHIFT> key on the keyboard, you can specify several sections at once (4,5) IN CLOCKWISE DIRECTION. The sections are highlighted with color (or example, an entire sleeve head).
· Specify the point (6) for superposition on the fixed line (in the first group of pieces)
· Specify the point (7) for superposition on the rolled line (in the second group of pieces)
· The window for selection of the direction for group superposition is displayed on the screen.
File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image004.gif- match of direction for group notches; File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image005.gif- opposite direction for group notches.
Select one of the direction buttons. At the same time the groups are superposed with each other, and you can inspect conjugation of armhole and sleeve head shape visually.
The cursor will be changed to File:C:\DOCUME~1\admin\LOCALS~1\Temp\OICE BC4CCDC3-6AC1-499A-8219-E79830E2BE9D.0\msohtmlclip1\01\clip image006.gif(with an arrow), and you can perform the second part of the function: [javascript:hhctrl_44.hhclick() View]