Difference between revisions of "Constructor:Increment table"
Pavel.Gordon (Talk | contribs) (→Specifics of grading by measurement data) |
Pavel.Gordon (Talk | contribs) (→Specifics of grading by measurement data) |
||
| Line 737: | Line 737: | ||
1) Grading must be performed by sizes and heights, as well as by corpulence data precisely in accordance with the type and direction of grading of the measurement property itself. | 1) Grading must be performed by sizes and heights, as well as by corpulence data precisely in accordance with the type and direction of grading of the measurement property itself. | ||
In other words, if a measurement property can be graded by sizes, by heights, horizontally, and vertically, it needs to be input in the increment table in the mode «by sizes», then «by heights», and input data in the cell Х or У – according to the assortment (position) of pieces. | In other words, if a measurement property can be graded by sizes, by heights, horizontally, and vertically, it needs to be input in the increment table in the mode «by sizes», then «by heights», and input data in the cell Х or У – according to the assortment (position) of pieces. | ||
| + | |||
2) ATTENTION! Input of increments in a point must be done considering previously input data in the adjacent points. In other words, consider the REFERENCE point of the increments, and «grow» formulas gradually, adding to the existing sizes the following, new data. | 2) ATTENTION! Input of increments in a point must be done considering previously input data in the adjacent points. In other words, consider the REFERENCE point of the increments, and «grow» formulas gradually, adding to the existing sizes the following, new data. | ||
Example: Grading a neck point vertically (coordinate Y) equal to measurements «Nape to waist» «NW». Then vertical grading of the point of the neck top in the back, equal to 1/3 of neck lsize «[0.3]*NS», must be performed taking into account the first move. As a result, we have an expression: «NW+ [0.3]*NS» | Example: Grading a neck point vertically (coordinate Y) equal to measurements «Nape to waist» «NW». Then vertical grading of the point of the neck top in the back, equal to 1/3 of neck lsize «[0.3]*NS», must be performed taking into account the first move. As a result, we have an expression: «NW+ [0.3]*NS» | ||
Expression for filling in the Y axis cell is composed the same way: | Expression for filling in the Y axis cell is composed the same way: | ||
<center> [[Image:embim3355.png|embim3355.png]] </center> | <center> [[Image:embim3355.png|embim3355.png]] </center> | ||
| + | |||
3) If an expression, valid only for some sizes, must be input, it is possible to use the table «Size database» to input graded values–coefficients. | 3) If an expression, valid only for some sizes, must be input, it is possible to use the table «Size database» to input graded values–coefficients. | ||
For example: for sizes 44-52 an expression 0,5*TA must be input | For example: for sizes 44-52 an expression 0,5*TA must be input | ||
| Line 746: | Line 748: | ||
for 62-68 – expression 0,5*(1,75*TA) | for 62-68 – expression 0,5*(1,75*TA) | ||
Coefficient (К1) must be input in the tab «Variables» of a given size database. Recalculation from 1,25 to 1250 will be performed, so it is necessary to input an expression «К1/1», and fill in the table as a table of linear values (1,25, 1,75,…). | Coefficient (К1) must be input in the tab «Variables» of a given size database. Recalculation from 1,25 to 1250 will be performed, so it is necessary to input an expression «К1/1», and fill in the table as a table of linear values (1,25, 1,75,…). | ||
| + | |||
4) When a model is opened again in the working window of the program, or when performing actions of copying models («Object/ Save as»), set size database and expressions with size properties will be saved. | 4) When a model is opened again in the working window of the program, or when performing actions of copying models («Object/ Save as»), set size database and expressions with size properties will be saved. | ||
ATTENTION! It is important to remember the danger of a repeat grading by these formulas, if after grading a point, increment required correction (by data of the buffer of «Seam algebra», etc.). | ATTENTION! It is important to remember the danger of a repeat grading by these formulas, if after grading a point, increment required correction (by data of the buffer of «Seam algebra», etc.). | ||
| + | |||
5) unctions of transferring increments from a point to a point [[Image:embim3356.png|embim3356.png]] will be blocked. | 5) unctions of transferring increments from a point to a point [[Image:embim3356.png|embim3356.png]] will be blocked. | ||
| + | |||
6) If «Rollback» was performed after inputting a formula and grading, graded nest will be restored to its initial view, but the formula will not be automatically canceled in a given point. It needs to be changed, or input increments in a point using a different mode (for example, size by size). In other words, if the function. «Grade» [[Image:embim3357.png|embim3357.png]] is not performed specifically for this point, grading by formula will not be performed. | 6) If «Rollback» was performed after inputting a formula and grading, graded nest will be restored to its initial view, but the formula will not be automatically canceled in a given point. It needs to be changed, or input increments in a point using a different mode (for example, size by size). In other words, if the function. «Grade» [[Image:embim3357.png|embim3357.png]] is not performed specifically for this point, grading by formula will not be performed. | ||
| + | |||
7) Piece copies will not save a set of input expressions with measurement data. | 7) Piece copies will not save a set of input expressions with measurement data. | ||
| + | |||
8) This grading mode can be used for Children's assortment, or to grade by Measurement table, sent by a client-firm. The program «Size database» has an option to input such a table by following menu points «Data/ File import*.xls». | 8) This grading mode can be used for Children's assortment, or to grade by Measurement table, sent by a client-firm. The program «Size database» has an option to input such a table by following menu points «Data/ File import*.xls». | ||
| + | |||
9) The function of opening a table from file ([[Image:embim3358.png|embim3358.png]]) is performed only for the format ОХР. But if «company» Measurement table, set as a table in Excel format (extension .xls), is opened from file in the program «Size database» and is saved, it will be transformed into the format ОХР and can be used in the Increment table. | 9) The function of opening a table from file ([[Image:embim3358.png|embim3358.png]]) is performed only for the format ОХР. But if «company» Measurement table, set as a table in Excel format (extension .xls), is opened from file in the program «Size database» and is saved, it will be transformed into the format ОХР and can be used in the Increment table. | ||
Latest revision as of 11:16, 24 March 2015
Contents
- 1 Increment Table Functions
- 2 Work with the Increment Table
- 2.1 Open the Increment table
- 2.2 Grading feature choice
- 2.3 Grading mode choice
- 2.4 Creating groups of points
- 2.5 Entering increment of the selected point
- 2.6 Performing grading
- 2.7 Switch to work with other piece points
- 2.8 Transfer to a different increment feature: length, fullness
- 2.9 Close the increment table
- 2.10 Save graded piece
- 2.11 Grading order in different grading modes
- 3 Special Modes of the Increment Table
Piece grading is performed by entering increments in piece points. For grading select a piece point, enter an increment value in the table and use a grading command.
To open the Increment Table select the button
in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the program text menu. The Increment Table will appear.
Increment Table Functions
The working window "Increment" includes a range of functions and a table of increment values. In the left column the increment values for the X axis are displayed, the right column features increment values for the Y axis.
Depending on the selected grading type( by size
, by height
, by fullness
), the table displays the list of sizes, lengths and fullnesses of the working model:

The increment value of graded pieces in a particular point is displayed, if you move the cursor and left click it.
The basic size is an original grading size, therefore the shape of the basic piece doesn't change during the grading, the row is zeroed in the table. Piece grading in regard to the table data is drafted starting from the basic size, moving upwards and downwards in the scale size by size. The increment sign, indicating the grading direction, is set from smaller to bigger size.

Point parameters control
The increments are set only in End and Control intermediate piece points.
The status of the intermediate point is important for grading:
The increment should be entered in Control intermediate point (
) otherwise all the grading sizes will be limited to one point (zero increment).
Intermediate points (
) don't have increments, they move proportionally to the increment of the adjacent Control points during grading.
This feature of Intermediate points can be used for grading. For example, the increment of the shoulder (1) and lower (2) points of the back armhole is defined. The point in the armhole segment (3) can be automatically graded proportionally between two points (1 and 2), if it has the Intermediate point status. In case of a Control point, the increment should be entered, otherwise all the size lines will be limited to one point.
The function
- "Point/ Change point status" is used to change the point parameters.
Recommendation: When grading is finished, the status of Control intermediate point should be restored for the point (the actual increment is corrected, if needed). Otherwise, according to the Intermediate points characteristics, the point will move with the adjacent shifting points.
Functional points (
), as a type of Intermediate points, don't need grading. Their position in grading depends on the increments of adjacent points and their own functions (segment division in a given proportion or a fixed offset from a point).
The main functions of the Increment table
Operating modes in a coordinate system:
- Increments in inner and screen coordinate systems.
The increment values in an inner coordinate system can be defined in regard to the piece position in the base, in a screen system they are identified in regard to the screen axes position or the piece on the screen.
Piece grading types:
-.by size, by height/ or by fullness
Blocking of these modes is defined by the scale type of the working model:
- The length and fullness modes are switched off in the Size scale;
- The grading by fullness mode, is switched off in the Length size scale;
Piece grading modes:
1st: Equal increments for all sizes (for even grading)
2nd: Increments for each size (for uneven grading)
3rd: Increments with steps (for grading by size ranges)
4th: Grading by measurements
Increment types:
- Interdimensional and Total increment.
The increments, entered into the table, are either distributed between sizes (gradually from size to size) or summarily between extreme grading sizes (then the increment value is divided by the number of intermediate sizes).
Work with point groups functions :
- To Set a point group; To Add or Delete a point in a group; To Destroy a group.
The functions allow to create and correct point groups with even increments for simultaneous grading of different points of one or a few pieces. Grading command:
- Perform grading according to selected parameters and values.
Process launch by selected values, with regard to the active operating modes of the table.
Special functions of the Increment Table
Functions of Increment Copying:
- Full increment copying or separate copying by Х, У coordinates.
The functions enable copying the increment value from the selected point to a few other points either fully or by one coordinate (X or Y).
Increment zeroing modes:
- Increment zeroing by all or current sizes.
Point regrading functions:
- Point regrading between sizes and for full piece grading.
The functions allow even distribution of the current increment in the point between two selected sizes or for full grading at once.
Additional functions:
- Increment calculation in the set direction.
The point increment moves along the line, selected on the screen (tangentially in the end point).
- Increment calculation by two adjacent points.
Proportional calculation of the point increment between the increments of two selected segment points.
Table completion functions:
- Fill in the table with initial increments
- Destroy the point link (the recent increments are cleared in the table)
- Move the values from the value input box by Х, У into the table cells
- Change the increment sign by Х, У
- Insert the increments by Х, У from the program "Calculator"
- Save the increment in the buffer and calculate the current increment from the buffer
Increment table movements on the screen
To move the table window to a suitable place, do the following:
- Click the upper panel of the table window.
- Holding the mouse button, move the table to the suitable place.
- Release the mouse button to fix the window position.
During next display, the table will appear in the set position, unless the program has been restarted.
Work with the Increment Table
Main working plan:
1. Open the Increment table
2. Select the grading feature: grade
3. Select the grading mode: even, unven, with steps, by measurements
4. Select the increment type: interdimensional or total
5. Create point groups
6. Select a grading point
7. Enter an increment of the selected point
8. Perform grading
9. Move to the next piece points
10. Move to drop, spec grading
11. Close the Increment table
12. Save the piece
Open the Increment table
To launch the Increment Table window, select the button
in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the text menu.
The Increment table will be displayed:
Grading feature choice
For piece grading by size, by length or by fullness choose the button
,
, or
of the corresponding grading feature should be switched on.
By size grading is turned on by default, the mode is enabled automatically, when the table is launched. If only by size grading is applied, length or by fullness features are blocked.
Grading mode choice
The grading mode is enabled by choosing one of the four buttons of the table
, for even grading,
unven grading, grading with steps, by measuring of the program "Size base".
1st mode
: Even increments for all sizes
Building of even piece grading, one increment value is entered for all sizes.
Interdimensional increments
: the value is set between the sizes, from small to big size.
Total increments
: the value is set summarily between extreme grading sizes and is evenly divided by the number of intermediate sizes
2nd mode
: Increments for each size (for uneven grading)
Creating uneven grading, different increment values are entered for each size.
3rd mode
: Increments with steps (for grading by size ranges)
Creating grading by size ranges, with increment steps.
Interdimensional increments
: the increment value is set between sizes in the selected range, from small to big size.
Total increments
: the value is set summarily between extreme range sizes and is evenly divided by the number of intermediate sizes inside each range.
To set increment steps, select the grading range limits by clicking the row with the required size, starting from the outer size of the first range. The row choice is canceled by right-clicking the mouse. The selected rows are highlighted.
Don't select the very first row of sizes, but select the bigger size row of the first range (as the smaller size is always the upper limit of the first range).
Functions of work with ranges:
- The list of increment range variants
- Clearing the lists of increment range variants.
A few range variants can be created for a single model grading.
Having created the first range (as described above), in order to enter a new range, select the command
and enter the limits of increment steps. This variant is described in a list of ranges as
.
<cenetr>
</center>
Additional grading range, in which the abbreviations of measurements are entered instead of numerical values (Bs – Breast semicircumference, Sw – Shoulder width etc.).
The work in this mode is described in detail in the chapter about Increment table special functions.
Creating groups of points
Different piece points can have identical increment values. In this case they can be merged into groups, and the increment value can be set for the whole group at once.
The point groups are created separately for grading by size, length or fullness.
To create a point group:
- Select the points of one or a few pieces in turns, for which one increment value should be entered. The selected points are highlighted.
- Finalize the choice by right-clicking the mouse button and repeat the steps for all other points.
If the wrong point has been selected for the group, use the commands
of the screen menu to cancel the operation.
|
A point group can be set by highlighting the capture area in the screen. Do the following:
After selecting the function button
press (without holding) the <SHIFT> key on the keyboard.
- Holding the left mouse button, move the cursor across the screen, highlighting the area around the points of one group.
- Release the mouse button to fix the area.
Commands for work with point groups:
1) Adding new points to an old group:
Select any point in the group.
- Select a point or a few points in different pieces, which have to be included in the group.
- Finalize the points choice by right-clicking the mouse button.
2) Deleting the point from the group:
- Indicate a point or a few points to be deleted from the group.
- Finalize the points choice by right-clicking the mouse button.
3) Destroying the point group:
|
Select a point in the group to be deleted
If you select a point, holding the <CTRL> key,
all the groups of the selected piece will be destroyed (but
by a single working grading feature: grading by size, length or fullness).
If the groups are created for a few pieces, they'll be destroyed in the selected piece, but preserve in the others.
ATTENTION! If a piece and its copy ("no name" or with a name) are in the screen, and there are point groups, both pieces will be graded simultaneously.
It helps to grade "common" points of Top and Lining simultaneously, without creating special point groups for them.
If such parallel grading isn't needed, only one piece should be displayed in the screen. If point groups aren't created, the pieces will grade independently.
Entering increment of the selected point
To enter increments do the following:
- Indicate grading point in the piece.
ATTENTION! Work with the Main contour points (Working and Ready View), the secondary contour will be changed automatically. If you try to select the secondary contour Cut, nothing happens in the Action table.
- Input the increment value separately for X and Y coordinates accordingly in the left and right windows of the lower part of the table.
Press the button
to transfer this value into the table cells.
You can also click the button with the required size or enter the values separately in each cell to fill in the table after entering the data in the lower windows. Click in the required cell and enter the increment value.
The value is entered by the selected mode and grading type (interdimensional and total).
ATTENTION! In all the grading modes
the sign of the entered values ("+" or "-") sets the direction of the grading. The increment sign by X (left column) or by Y (right column) is set by the coordinate axes, from smaller to bigger.
Table completion functions:
- Fill in the table with initial increments
After entering the new increments in a previously graded point, this function can help to view the initial increments in the point by restoring the previous table data view.
- Destroy the point link (the recent increments are cleared in the table)
The table data are cleared, the increment of the last selected point isn't displayed.
- Change the sign of the entered increment in Х or У column.
- Save the increment in the inner buffer of the table;
- Take the values from the buffer table to copy the increments from point to point.
- Paste into the column Х or У the increment values, saved in the buffer of
"Seams algebra" and "Calculator". These data are used in the 2nd grading mode only (by size).
For example, to grade the pieces by the Measurements sheet, enter the actual Sheet data in the "Calculator" tab
"G", in the other tab "Н" calculate the increment, using the function f6, and save the data in the buffer
. The table command
enters these data in the required column (Х, У).
Performing grading
To grade by input increments select the command
.
The point will get increment by the grading modes in the table, the grading by the current feature (grading by size, length or fullness) will be displayed.
During grade piece grading
only grade grading is displayed, during drop grading
only drop grading is displayed, the same refers to spec grading.
|
To display full grading use the command
,
holding the <CTRL> key.
Switch to work with other piece points
By indicating other points and point groups of the piece, all the required increment values are entered by the grading schemes.
Transfer to a different increment feature: length, fullness
For models of the length scale move to grading by size mode, by turning on the button
and repeat the whole grading cycle.
Then, for models of the fullness scale, move to grading by fullness, by turning on the button
, and repeat the whole grading cycle.
Close the increment table
Having finished the increments input, close the table by clicking the button
on the upper panel of the table. You can also click the table launch button repeatedly
in the screen button menu or go to steps of the text menu "Window/ Display (Hide) increment table".
Save graded piece
To save the piece in the base, select the button
in the screen button menu or go to steps of the text menu "Window/ Save the screen contents in the base".
Grading order in different grading modes
1) To grade in the 1st grading mode do the following:
- Launch the Increment table. The operating modes in the inner coordinate system are turned on automatically
, the grading by size is set. 
- Turn on the 1st grading mode by clicking the button

- .Select interdimensional or total increments by clicking the button
or. 
- Indicate grading point in the piece.
- Fill in the table: input the increment values in the lower input windows, move the values in the left (X) or right (Y) size column by clicking the button.
- Perform the grading in the point by clicking the button

- Continue increment input by sizes, indicating other points of the piece.
Set the grading by length
(if available), then fullness grading
(if available) and repeat the process, having selected the grading mode and having created new point groups.
Save the graded piece in the base by clicking the button
of the screen button menu.
2) To grade in the 2nd grading mode do the following:
- Launch the Increment table. The operating modes in the inner coordinate system are turned on automatically
, the size grading is set. 
Grading in the 2nd mode
is also automatically set during table launch.
- Indicate grading point in the piece.
- Fill in the table: input the increment values in the left (X) and right (Y) size columns
- Continue increment input by sizes, indicating other points of the piece.
- Set the length grading
(if available), then spec grading
(if available) and repeat the process, having selected the grading mode and having created new point groups.
3) To grade in the 3rd grading mode do the following:
- Launch the Increment table. The operating modes in the inner coordinate system are turned on automatically
, the by size grading is set. 
- Set the ranges of sizes for grading by clicking the buttons of the extreme range sizes (except the first size).
- Indicate grading point in the piece.
- Fill in the table: input the increment values manually or enter them in the lower input windows, move the values to the left (Х) and right (У) columns by clicking
.
- Continue increment input by sizes, indicating other points of the piece.
- Set the by length grading
(if available), then by fullness grading
(if available) and repeat the process, having selected the grading mode and having created new point groups.
Save the graded piece in the base by clicking the button
of the screen button menu.
Special Modes of the Increment Table
Special Functions
Increment copying
To copy increments from one point to another (or a few points) do the following:
- Indicate a piece point (1) with an increment, which needs to be copied.
- Select copying increments function in the table:
- Copy increment value by coordinate Х only.
- Copy increment value by coordinate Y only.
The cursor will change like this
,
or
.
- Indicate one or a few points (2a, 2b, 2c, 2d), where the increment should be transfered.
The operation of increment copying allows to create the so-called "Increment reference book".
A special range of models with checked piece gradation of varied assortment can be created. During new pieces grading the increments can be copied in the required points from the referenced" pieces, by displaying them on the Working model screen from the Active "referenced" model (with the function
of the "Work with base" window)
Increment zeroing
To zero the increments of the previously graded pieces do the following:
- Select one of the zeroing commands in the table:
- Increment zeroing in the point by all size features: grading by size, height or fullness
- Increment zeroing modes for a current measurement.
—size,
—height,
—fullness.
The program cursor will look like this
or
.
- Indicate a point (or a few points) to zero the increments.
Then the lines of all the sizes will be limited to a point for full grading or for grade, drop or spec grading only. The point zeroing commands refer to particular points only, not groups.
If needed, after zeroing the increments, the
"Segment/ Regrade" function helps to align the figured piece segments in different areas to fit the base piece form.
|
During the
and
commands execution, if the
<CTRL> key is hold on the keyboard, zeroing of all the piece points is performed for all features or for a current size. The sizes aren't deleted from the pieces, but repeat the form of the base grade, length or volume piece.
With the help of the function
"Delete sizes" in the "Work with the base" window, all the grading sizes, except for the base one, can be deleted. Then all the increment values will also be zeroed.
Regrading of the point increment
To evenly distribute the increment between two sizes or across the whole grading, do the following:
- Select one of the point increment regrading commands in the table:
- Increment regrading between two selected sizes. The cursor will change like this
- Increment regrading for full grading. The cursor will change like this
- Indicate a point (1) in the first calculable size.
- Indicate the same point (2) in another size.
The total increment between the selected sizes is evenly divided by the number of intermediate sizes. The calculated increment value will be set either inside the range between the indicated sizes
or across all the sizes
.
The point regrading commands refer to particular points only, not groups.


Increment in a given direction
It's possible to input increments not only for the coordinates XY, but also for the extension of the segment in the program. This grading method is used, for example, for frill items, figured belts, different slanted cuts: in flared skirts (bell-shaped, circular skirts), for raglan sleeve cuts etc.
To enter the increment, calculated along the direction of the selected line, do the following:
- Select a point (1) for grading.
- Indicate the piece segment near the end point (1a).
Then the input window will be displayed on the screen for entering the increment value:
The value sign defines the grading direction: if the segment lengthens by size, the increment value will be positive, if it shortens, it will be negative.
Different values can be input manually by size (button
) or from the buffer (button
).
Press the YES button to confirm the data input.
The input window will close, the input increment value in the Increment table will be automatically divided into 2 coordinates: X (left column) and Y (right column).
Select the command
in the table to perform the grading.
The point increment moves along the line, selected on the screen (tangentially in the end point).


















