Difference between revisions of "Constructor:Operations with contour"

From Julivi Help
Jump to: navigation, search
(→‎Lock a contour)
(→‎Cut a contour)
 
Line 258: Line 258:
  
 
=== Cut a contour ===
 
=== Cut a contour ===
 +
 +
The function allows to cut a line, which extends beyond the limits of a piece contour (cut or any locked inner contour). To cut a contour:
 +
·Select the tab CONTOUR and the button [[File:embim1695.png]] in the tab. The cursor view changes to [[File:embim1696.png]].
 +
It is also possible to follow text menu points « Contour/ Cut contour».
 +
·Specify a contour being cut ('''1'''), then specify a locked contour that limits it ('''2''').
 +
 +
[[File:embim1697.png]]
 +
 +
If a contour, which is being cut is completely outside the border of a limiting contour, it will disappear.

Latest revision as of 12:18, 5 March 2015

This panel contains a number of moving and rotating functions for a contour in one size, in some or all sizes of a piece, depending on the state of switch for working with the graded nest:

Embim1611.png - working with all sizes (moving a contour in all sizes).

Embim1612.png - working with one piece (moving a contour in one size).

Embim1613.png - working with a portion of sizes (moving a contour in selected sizes). To avoid creating incorrect graded nest, functions of various contour modifications (deleting, creating, changing type and properties) are performed for an entire graded nest at once.

Work is performed in shifted coordinates Embim1614.png, and with superposed pieces Embim1615.png. Functions of moving, rotating are applicable to various inner contours of a piece, and are not performed on the main contour (this task refers to the functions of moving piece as a whole).


Input of different values by sizes of a graded nest

To set values while performing operations in the program, a general window of data input (with different function titles) is used :

Embim1616.png

·To input a value, constant for all sizes, the value must be recorded in the input line. ·To change the sign of an entered value, press the button Embim1617.png ·To input data of the previously saved buffer of the «Seam algebra», press the button Embim1618.png ·To input various values by sizes manually, press the button Embim1619.png. The window view changes to:

Embim1620.png

Size cells are displayed in such an opened view of the window, values for an entire graded nest can be input in these cells. It is possible to input values manually by clicking the cell of a required size-height.

When a separate top input line is filled in, this value is transferred to all cells of the table by pressing the button Embim1621.png , when a column with the size or height is clicked - only a set column or line is filled out. Other methods for a speedy filling in of the table are described in the section «Calculator».

·To return to a minimized window view, press the button Embim1622.png

Other functions of the data input window:

Embim1623.png - input entered values to the buffer of the «Seam algebra» to use in future

Embim1624.png and Embim1625.png - save to file and read data from file

Embim1626.png - clear the table

Moving a contour

Move a contour along X

The function allows to move inner contours along the Х axis. To do so: ·Select the tab CONTOUR and the button Embim1627.png in this tab. The cursor view changes to Embim1628.png. It is also possible to follow text menu points « Contour/ Move along Х». ·Specify a contour. Data input window is displayed on the screen:

Embim1629.png

·Input value of contour movement in the input line. Movement direction is determined by the Х axis: to the right – «plus», to the left – «minus». It is possible to enter values differing by size manually (button Embim1630.png), or from the buffer (button Embim1631.png). ·Press the YES button to confirm data input, press CANCEL to cancel.

Move a contour along Y

The button Embim1632.png or menu point «Contour/ Move along У»

The function allows to move a contour along the Y axis. Performance of the function is similar to that of «Move a contour along Х».

Move a contour along XY

The function of moving contour along coordinate axes step-by-step and reviewing the movement path. To move a contour along ХУ: ·Select the tab CONTOUR and the button Embim1633.png in this tab. The cursor view changes to Embim1634.png. It is also possible to follow text menu points « Contour/ Move along ХY». ·Specify a contour. Window of movement parameters is displayed on the screen:

Embim1635.png

·Set movement direction by clicking the buttons with direction arrows. Contour movement will be displayed visually on the screen (contour, highlighted with red color). Movement value upon one click is set by a value, set in the window STEP. If a movement value is known, it can be input in the windows DX and DY and press the button Embim1636.png. Press the YES button to confirm data input, press CANCEL to cancel.

Move a contour arbitrarily

To move a contour arbitrarily: ·Select the tab CONTOUR and the button Embim1637.png in this tab. The cursor view changes to Embim1638.png. It is also possible to follow text menu points « Contour/ Move arbitrarily». ·Specify a contour and drag the cursor with contour across the screen, without releasing the mouse button. Release the button, having set a required movement. ·Click the right mouse button to stop using the function.

Move a contour to a point

To move a contour to a point on a piece: ·Select the tab CONTOUR and the button Embim1639.png in this tab. The cursor view changes to Embim1640.png. It is also possible to follow text menu points « Contour/ Move to a point». ·Specify a fixed point (1) of a piece, to which the contour will be moved. ·Specify a point (2) on the contour being moved.

Embim1641.png

Deleting a contour

To delete contours (except grain line, title point and the main contour): ·Select the tab CONTOUR and the button Embim1642.png in this tab. The cursor view changes to Embim1643.png. It is also possible to follow text menu points « Contour/ Delete» ·Specify a contour, which needs to be removed

Embim1644.png

1)It is possible to delete Cut contour on a piece. For pieces, in which Working contour is set as main, Cut contour is created automatically when piece is saved in the database.

2) Pieces, where Cut contour is deleted, are not displayed in the program «Julivi mark», since Cut contour is displayed for drafting in layouts

Rotating a contour

Rotate a contour arbitrarily

The function allows to rotate a contour with reference to a point on a piece or to its own axis. To rotate a contour arbitrarily around a point: ·Select the tab CONTOUR and the button Embim1645.png in this tab. The cursor view changes to Embim1646.png. It is also possible to follow text menu points « Contour/ Rotate arbitrarily» ·Specify any point of a piece – point of rotation center ·Specify a contour being rotated and drag the cursor on the screen without releasing the mouse button. ·Having set a required rotation, release the mouse button

Embim1647.png To rotate a contour around its own axis there is no need to specify a point - rotation center, instead, specify the contour being rotated at once

Rotate a contour by an angle

The function allows to rotate a contour by a set angle with reference to a point or its own axis. To rotate a contour by an angle with reference to a point: ·Select the tab CONTOUR and the button Embim1648.png in this tab. The cursor view changes to Embim1649.png. It is also possible to follow text menu points «Contour/ Rotate by an angle». ·Specify any point of a piece - point of rotation center. ·Specify a contour being rotated. Data input window is displayed on the screen:

Embim1650.png

·Set rotation angle in the input line. Rotation direction is set on the basis of the clock direction (by the hint picture Embim1651.png): clockwise direction – «plus» sign, counter-clockwise – «minus». It is possible to input values differing by size manually (button Embim1652.png), or from the buffer (button Embim1653.png).

·Press the YES button to confirm input data, press CANCEL to cancel.

Embim1654.png To rotate a contour around its own axis there is no need to specify a point - rotation center, instead, specify the contour being rotated at once.

Embim1655.png Open view of the value input window (button Embim1656.png) for this function is displayed on the green background, since the table contains nonlinear values – angles. When a buffer for the «Seam algebra» is created for this function, it is required to work taking into account the tab type. To change tab type «Linear value» (in other words, lengths) to «Angle value» and vice versa, click the right mouse button in any place of value table. Additional menu is displayed on the screen, there tab type can be changed by clicking a line:

Embim1657.png

Rotate a contour by a value

The function allows to rotate a contour by a set value with reference to a point or its own axis. To rotate a contour around a point by a value: ·Select the tab CONTOUR and the button Embim1658.png in the tab. The cursor view changes to Embim1659.png. It is also possible to follow text menu points « Contour/ Rotate by a value». ·Specify any point of a piece - point of rotation center. ·Specify the contour to be rotated ·Specify a point of angle value count. Data input window is displayed on the screen:

Embim1660.png

·Set rotation value in the input line. Rotation direction is set on the basis of the clock direction (by the hint picture Embim1661.png): clockwise direction – «plus» sign, counter-clockwise – «minus». It is possible to input values differing by size manually (button Embim1662.png), or from the buffer (button Embim1663.png). ·Press the YES button to confirm input data, press CANCEL to cancel.

To rotate a contour around its own axis there is no need to specify a point - rotation center, instead, specify the contour being rotated at once.

Mirror a contour

To mirror a contour with reference to a vertical or a horizontal line: ·Select the tab CONTOUR and the button Embim1665.png in the tab. The cursor view changes to Embim1666.png. It is also possible to follow text menu points «Contour/ Mirror». ·Specify a contour. The window of symmetry selection is displayed on the screen:

Embim1667.png

·Select axis type for mirroring a contour: Embim1668.png - vertical, Embim1669.png - horizontal.

Mirror a contour with reference to a line

To mirror a contour with reference to a line: ·Select the tab CONTOUR and the button Embim1670.png in this tab. The cursor view changes to Embim1671.png. It is possible to follow text menu points « Contour/ Mirror with reference to a line». ·Specify a contour (1), and then the symmetry line (2) - section of any contour, with reference to which a selected contour will be mirrored.

Embim1672.png

Contour modifications

Change point order

Contour outline during archiving or constructing pieces must be performed in clockwise direction, beginning and end of a section is defined according to this rule of positive outline of a contour.

If an error was made, and gashes on a contour are drafted outward, it is necessary to change point order in a given contour. To do so:

·Select the tab CONTOUR and the button Embim1673.png in this tab. The cursor view changes to Embim1674.png. It is also possible to follow text menu points «Contour/ Change point order».

·Specify a contour. Changes in the contour can be seen by a correct direction of gashes inside the contour.

Remove gashes

To delete all gashes on a contour (for example, on pieces of adhesive lining) :

·Select the tab CONTOUR and the button Embim1675.png in this tab. The cursor view changes to Embim1676.png. It is also possible to follow text menu points « Contour/ Delete gashes».

·Specify a contour. All gashes on a specified contour are deleted.

Embim1677.pngWhen gashes are removed at a fold line (on the fold) on the main contour, their presence on the Cut contour depends only on the settings of the window «Piece parameters».

Embim1678.png

Copy a contour

The function allows to copy a contour from one piece to another. Most often, pieces should be superposed on the screen, but the function is also available for free pieces.

To copy a contour:

·Create a group of pieces by using one of the commands for superposing (buttons Embim1679.pngEmbim1680.pngEmbim1681.pngEmbim1682.png of the screen menu)

·Select the tab CONTOUR and the button Embim1683.png in the tab. The cursor view changes to Embim1684.png. It is also possible to follow text menu points «Contour/ Copy».

·Specify a contour being copied (1), then a piece (2), to which the contour must be transferred.

Embim1685.png

It is possible to copy the main contour to a different piece. For example, to create a forepart of a contour for a patch pocket on a piece, the main contour from a piece of the Finished view of a pocket is copied.

Embim1686.png

·To continue copy operations with a different pair of pieces, click the right mouse button and specify the next pair of pieces ·To stop using the function, click the right mouse button again

Embim1687.png 1) The function can be performed with superposed pieces as well as with free pieces (with the following contour movement to a required place on a piece). When working with a free piece, the following message is displayed:

Embim1688.png

Button YES - specified contour of one piece will be copied to another (free) piece, saving piece placement on the screen with reference to each other. Then a copied contour can be moved to a required place on a piece. Button NO - cancels copying action. 2) Copying is not performed between a free piece and a piece, which is a part of a group.

3) To create a contour copy on the same piece, double-click the contour being copied. For example, it is possible to save a derived seam contour as an inner contour of a piece. Use the function Embim1689.png - «Contour/ Move a contour arbitrarily» to move one of the two matching contours.

4) Contours Cut, Finished view, Working contour, Grain line, Title point, Shadow are copied as inner contours to other pieces (because a piece can not have two Grain lines, etc.). Other contours are copied according to their type: Inner, Sight, Cut line, Text, Pinhole. Contour type is also saved upon copying (crosses, lines, «do not draw»)

Lock a contour

The functions lock sections of an open contour in a straight line (for example, if a section was deleted). To lock a contour: ·Select the tab CONTOUR and the button Embim1690.png in the tab. The cursor view changes to Embim1691.png. It is also possible to follow text menu points « Contour/ Lock». ·Specify a contour to be locked. Open lines of a contour will be locked.

Embim1692.png

This function is used to create a locked arbitrary contour (command Embim1693.png - «Contour/ Create new contour») for an exact connection between its first and last point.

To lock the main contour automatically at the time of saving a piece to the database, switch on the setting Embim1694.png (text menu points «Settings/ Program parameters», tab GENERAL/ Constructor)

Cut a contour

The function allows to cut a line, which extends beyond the limits of a piece contour (cut or any locked inner contour). To cut a contour: ·Select the tab CONTOUR and the button Embim1695.png in the tab. The cursor view changes to Embim1696.png. It is also possible to follow text menu points « Contour/ Cut contour». ·Specify a contour being cut (1), then specify a locked contour that limits it (2).

Embim1697.png

If a contour, which is being cut is completely outside the border of a limiting contour, it will disappear.