Difference between revisions of "Design:Piece Handling"

From Julivi Help
Jump to: navigation, search
(→‎Overlapping Section Ends on Extension)
(→‎Deleting Last Commands for Groups)
Line 446: Line 446:
 
In order to delete the last command for a group (groups) of overlapped pieces:
 
In order to delete the last command for a group (groups) of overlapped pieces:
  
−
* Press [[Image:design1059.png]]. If only one group has been created, “step-by-step rollback” is automatically activated for the actions performed with the group up to the very first one, i.e. until the button becomes locked.
+
* Press [[Image:design1058.png]]. If only one group has been created, “step-by-step rollback” is automatically activated for the actions performed with the group up to the very first one, i.e. until the button becomes locked.
−
* If several groups have been created, when [[Image:design1060.png]] command is selected, the cursor takes the form of [[Image:design1061.png]].
+
* If several groups have been created, when [[Image:design1059.png]] command is selected, the cursor takes the form of [[Image:design1060.png]].
−
 
+
−
Position the cursor crosshair onto a piece of the required group and click the left mouse button.  
+
  
 +
Position the cursor crosshair onto a piece of the required group and click the left mouse button.
  
 
==== Destruction of Groups  ====
 
==== Destruction of Groups  ====

Revision as of 11:18, 27 May 2015

Real pieces can be assembled from a drafted construction drawing by means of specifying their ready view outlines, inner outlines and grains using special functions. You can continue working with the obtained pieces: construct seams on them, draw them on the plotter, etc.

The following issues are discussed in this section:

  • the process of creating pieces using separate construction elements;
  • operations with the screen (for pieces);
  • setting seam parameters and constructing seams;
  • seam algebra (for pieces);
  • modification of cut outlines;
  • sending pieces to the plotter or printer;
  • sending pieces to the main constructor program for handling them as industrial pieces.

Creating Pieces Using Separate Construction Elements

Creating working pieces based on a construction drawing drafted in the “Design” program involves assembling piece outlines of separate construction elements first: the ready view and inner outlines; and then pieces are assembled using the obtained outlines. These functions are performed in the construction drawing window Design982.png in the Pieces tab.

The locked commands will become active when you go to the piece handling window.

Assembling Outlines

In order to assemble piece outlines using separate construction elements:

  • Select the Pieces tab;
  • Press Design983.png button of the button menu. The cursor of the program will take the form ofDesign984.png. Or execute the “Piece(s)/ Assemble outline” menu item.
  • Use the cursor crosshair to indicate all construction elements (segments, lines, arcs, …) successively which the assembled outline will consist of. Elements should be selected in the clockwise direction. Selected elements will be highlighted in color.
  • When all necessary elements have been specified, click the right mouse button to finish execution of the function. A window for setting outline parameters will be displayed on the screen.
Design985.png
  • Click on the appropriate type to specify the outline type
  • Press the “Yes” button to confirm the action or the “Cancel” button to undo.

A name will be automatically assigned to the outline, in sequence, with “C” at the beginning of the name.

The outline name can be also input manually.


Design986.pngFor example: In order to assemble the “Bodysuit front part” later on, two outlines this piece consists of need to be assembled:

      1. The “Ready view” type outline for the front part;
      2. The “Inner outline” type outline for the gore line.

To do this: For outline 1:


  • Select the Pieces tab (if it has not been selected yet);
  • Press Design987.png button of the button menu. The cursor will take the form ofDesign988.png. Or execute the “Piece(s)/ Assemble outline” menu item.
  • Use the cursor crosshair to indicate lines 1, 2, 3, 4, 5, 6, 7, which the assembled outline will consist of (clockwise).

Selected elements will be highlighted in color.

  • Click the right mouse button to finish execution of the function. A window will be displayed for setting outline parameters where the outline type needs to be specified by means of selecting the “Ready view” switch.
Design989.png
  • Press the “Yes” button.

Name “C1” will be automatically assigned to this “ready view” outline.


For outline 2:

  • Press Design990.png button of the button menu. The cursor will take the form ofDesign991.png.

Or execute the “Piece(s)/ Assemble outline” menu item.

  • Use the cursor crosshair to indicate the line (8) the assembled outline will consist of.
  • Click the right mouse button to finish execution of the function. A window will be displayed for setting outline parameters where the outline type needs to be specified by means of selecting the “Inner outline” switch.
  • Press the “Yes” button. Name “C2” will be automatically assigned to this “inner outline” contour.

The “Assemble outline” function has a number of specific features:

  1. Grain line: If the grain outline has been purposely created on the piece, the piece will be oriented in the program accordingly, based on the specified grain. The grain direction will depend on the direction (of the start and end points) when creating a line for the grain.

If the grain has not been created purposely, it is automatically constructed vertically.


  1. Selection of the necessary element: When you select an element on the screen using a cursor and click the left mouse button, you can read its name in the bottom area of the screen.
Design992.png


If a few items are close to or on each other in this screen area, the element necessary for work can be selected.

This option is of special significance when performing the “Assemble outline” function where is it often necessary to indicate one of several lines located close to each other.

In order to perform the selection, hold the left mouse button down and press the “Space” key on the keyboard. Then, the names of the elements you are currently pointing at will be shown in the bottom screen area. When you see the name of the item you need, release the left mouse button.

  1. Unselecting the last selected element: When the “Assemble outline” function is activated, the “back” button in the button menu becomes active. If a wrong element or a number of elements have been erroneously indicated when performing the function, Design993.png button (“back”) provides step-by-step cancelling of the last selection. This command is executed in parallel with the main command.

To do this, do not stop execution of the “Assemble outline” function (without clicking the right mouse button so that the cursor still hasDesign994.png command logo) and press Design995.png as many times as the number of selected elements you wish to unselect. Then, you can continue indicating the necessary elements.

  1. Stopping the command execution: When the “Assemble outline” function is activated, the “Stop” button (Design996.png) in the button menu becomes active, which allows terminating the command execution;
Design997.png
  1. Infinite straight lines do not participate in outline assembling.
  2. Outline assembling: Be sure to indicate sections in the clockwise direction!

Attention

When performing the “Assemble outline” function, lines should be indicated exactly in the part which will be included into the assembled outline.

It is essential in situations where the line partially exceeds the border of the next specified line (see Line 2).


It may become necessary to use the “old” assembling method. You can activate this assembling mode using the <CTRL> key on the keyboard. The “old” assembly is based on the principle of searching for intersections between specified sections for each size in the indicated location precisely (not proportionally for sizes relative to the clicked location). The new method is based on the intersection of sections but with regard to the ratio of section parts for sizes (if in one size a click on the line is in the middle of its length, the middles of sections will be dealt with in all sizes).


Note


а). When the outline is being assembled, a situation may arise when in some sizes piece sections seem to “stick out” of the outline. It may occur if a section has a big range of the increment value for sizes.

The section length can be so different in different sizes that when the middle of the section is indicated in the smallest size, in the largest size (where the middle is also found) it will be a part exceeding the next section crossing it. This is what violates the main condition of assembling: indicating lines exactly in the part which is to be included into the assembled outline.


b). The principle that underlies the Outline Assembly functions is intersection of lines.

If two parallel lines are specified, such assembly cannot be correct technically.

It is recommended that the drawing should be checked for all sizes using the screen scrolling of sizes on the run screen bottom panel. If this situation arises, you should take additional actions so that the program does not search for intersections of lines automatically: they should clearly converge at the necessary point instead. This will help avoid problems with the Outline Assembly.

In some situations it may be helpful to switch to the second (“old”) assembly method using the “CTRL” button on the keyboard.


Assembling Pieces

In order to assemble a piece using previously created individual outlines:

  • Select the Pieces tab (if it has not been selected yet);
  • Press Design1000.png button of the button menu or execute the “Piece(s)/ Assemble piece” menu item. The cursor of the program will take the form ofDesign1001.png.
  • Use the cursor crosshair to indicate all the outlines the assembled piece will consist of successively. The main outline should be indicated first (the ready view outline or cut outline), and then (in any sequence) inner outlines, and grain – if this outline has been purposely created.
  • When all outlines have been specified, click the right mouse button to finish the function execution.

A parameter setting window will be displayed on the screen where the piece name needs to be input.


Design1002.png

When setting the piece name, the “space” key on the keyboard must not be used. In order to set a space between words, hold the SHIFT button on the keyboard down and press the “dash” button above the alphabetical panel of the keyboard. Do not use the hyphen sign in piece names.


  • Press the “Yes” button to confirm the action or the “Cancel” button to undo.

Based on the example described above, the function of creating the “Bodysuit front part” of two outlines will be performed as follows:

  • Design1003.pngAssemble the outlines the future piece is to consist of (see description of the “Assemble piece” function):
      1. The “Ready view” type outline for the front part;
      2. The “Inner outline” type outline for the gore line.
  • Select the Pieces tab (if it has not been selected yet);
  • Press Design1004.png button or execute the “Piece(s)/ Assemble piece” menu item. The cursor of the program will take the form ofDesign1005.png.
  • Use the cursor crosshair to indicate the ready view outline “C1” and the inner outline “C2” the piece will consist of.
  • Click the right mouse button.

A parameter setting window will be displayed on the screen where the piece name needs to be input.

Design1006.png
  • Press the “Yes” button to confirm the action.

The “Assemble piece” function has a number of specific features:


1). If you specify two “Ready View” outlines in succession when assembling a piece using outlines, the first specified outline will be the “Ready View” outline while the second one will be the “Inner outline” in the piece.


For example, there is a piece of the Front and a piece of a Pocket on the front which is needed both as a separate piece and as the inner outline on the front for indicating the pocket location. In this case, when the Front piece is assembled, you should first specify the Front outline, and then the Pocket outline.


2). A lot of constructors prefer to work with the “Ready View” outline, and then, after necessary modifications, seam allowances are laid off outward on the piece and the “Cut” outline is thus constructed.

Those who work with piece cuts and then lay off seams inward should consider the following:

When a piece is assembled using the outlines with the “Cut” as the main one among them, this outline will be automatically duplicated with another outline (the so-called “Operating Outline”). This allows preserving the configuration of the principal outline when using functions for cut designing: construction of steps, corners, cuffs, vents, etc.

Design1007.png


Deleting Outlines

In order to delete an outline:

  • Press Design1008.png button of the button menu. The cursor will take the form ofDesign1009.png.

Or execute the “Piece(s)/ Delete outline” menu item.

  • Use the cursor to indicate an outline (or a few outlines) which needs to be deleted and click the left mouse button.

Working with pieces window

When pieces assembled using separate construction elements are ready, further operations with them are performed in the piece handling window Design1010.png. In order to go to it, activate it by pressing the left mouse button.

You can set and construct seams on pieces in this window. The pieces obtained can be printed using the printer or plotter; they can be moved on the screen, rotated, inverted mirror wise and overlapped in different ways.

Attention! When switching to the piece handling mode after some changes in the algorithm (for example, replacement of the “Assemble outline” or “Assemble piece” operators) both old and new pieces will be displayed on the screen at the same time. Design1011.png command or the “Project/ Execute” menu items need to be executed.


Working with screen (for Pieces)

Screen operating commands in the ready piece handling mode (Design1012.png button) become active immediately after switching to this operating mode.

The functions that are active when operating with both drawings and pieces are described in the “Screen Handling (for Drawing)” section. These include image zooming, screen redrawing, element visibility and program setting functions.


Commands which are active only in the piece handling mode and functions which have some differences in operation when switching to the piece mode will be described below.


Piece Organization Functions

“Organizing” Screen

When Design1013.png button is selected or the “Screen/ Organize screen” menu item is executed, pieces will be displayed in the scale which allows viewing all pieces on the screen at once, and they will be positioned in such a way that none of the pieces overlays another one.


Displaying Piece in Screen Center

If a particular piece needs to be selected and displayed in the full screen mode:

  • Select Design1014.png button or execute the “Screen/ Piece on screen” menu items. The cursor will take the form ofDesign1015.png.
  • Click with the cursor crosshair on any element of the selected piece.

The image will be zoomed in so that the piece can be seen best and fit entirely in the screen.


Piece Moving Functions

The block of commands for piece moving is located in the left button menu of the program:

Design1016.png

Random Moving

In order to move a piece arbitrarily on the screen:

  • Press Design1017.png button. The cursor will take the form ofDesign1018.png.
  • Set the cursor crosshair onto a line or point of the piece and (without releasing the left mouse button) move the piece arbitrarily to the required location on the screen.
  • Release the left mouse button. This displacement will be fixed.
  • You can set the cursor onto another piece and continue working with this command.
  • In order to exit the command, press the right mouse button.

When the <CTRL> is held down on the keyboard, the function of the onscreen piece moving (Design1019.png) allows obtaining another copy of the piece being displaced. This option can be used to perform various checks of matching, bends of pieces, etc.

When construction is performed repeatedly (Design1020.png), these piece copies are removed from the screen.


Rotation by 90 Degrees

In order to rotate a piece by 90 degrees:

  • Press Design1021.png button. The cursor will take the form ofDesign1022.png.
  • Set the cursor crosshair onto a line or point of the piece and click the left mouse button. The piece will be rotated by 90 degrees clockwise. Each mouse click will continue the clockwise rotation.
  • You can set the cursor onto another piece and continue working with this command.
  • In order to exit the command, press the right mouse button.
  • In order to reset the piece to its initial state:

Press Design1023.png button and set the cursor crosshair on any element of the group.

Design1024.png


Random Rotation

In order to rotate a piece by a random angle:

  • Press Design1025.png button. The cursor will take the form ofDesign1026.png.
  • Set the cursor at any point on the piece line and rotate the piece arbitrarily by the required angle without releasing the left mouse button.
  • Release the left mouse button. This rotation will be fixed.

Rotation is performed around the piece center.

  • You can set the cursor onto another piece and continue working with this command.
  • In order to exit the command, press the right mouse button.
  • In order to reset the piece to its initial state:

Press Design1027.png button and set the cursor crosshair onto any element of the group.

Design1028.png


Mirroring

In order to rotate a piece mirror wise on the screen:

  • Press Design1029.png button. The cursor will take the form ofDesign1030.png.
  • Click the left mouse button on a point or line of the piece. A window of rotation options will be displayed on the screen:
Design1031.png
  • Click the mouse button to select the button for rotation relative to the vertical line Design1032.png, horizontal line Design1033.png or around any other line Design1034.png.

When any of these three options is selected, the piece will be rotated mirror wise.


In order to perform mirroring vertically (Fig. 1) and horizontally (Fig. 2), it does not matter which line or point will be specified because mirroring will be performed relative to the center of the piece.

Design1035.png
Fig.1 Fig.2


In order to perform mirroring around a line, enter the command and specify the line (1) the piece needs to be rotated mirror wise around (Fig. 3).

Design1036.png
Fig.3
  • You can set the cursor onto another piece and continue working with this command.
  • In order to cancel exiting the rotation request window, select the “Cancel” button.
  • In order to exit the command, click the right mouse button.
  • In order to reset the piece to its initial state, press Design1037.png button and set the cursor crosshair onto any element of the group.

Bending Pieces

In order to bend a piece along its bend line:

  • Press Design1038.png button. The cursor will take the form ofDesign1039.png.
  • Set the cursor crosshair onto the bend line (1), then on a line or point of the part of the piece to be bent (2).

The part of the piece (2) will be rotated around the bend line.

  • You can set the cursor onto another piece and continue working with this command.
  • In order to exit the command, press the right mouse button.
  • In order to reset the piece to its initial state:

Press Design1040.png button and set the cursor crosshair onto any element of the piece.

Design1041.png

When the function is performed relative to a curved line, the bend will be performed tangentially to the clicked point. I.e. the bend is performed in several places of the curve, tangentially, as when handling paper, including checking of the curved bottom line turn up.

Resetting Pieces to Their Initial State

In order to reset a piece to its initial state after some onscreen movement operations have been performed with it:

  • Press Design1042.png button. The cursor will take the form ofDesign1043.png.
  • Position the cursor crosshair onto any piece element. The item will be reset to its initial state.
  • You can set the cursor onto another piece and continue working with this command.
  • In order to exit the command, press the right mouse button.

All the onscreen movement functions described above operate with both a single piece and groups of pieces. So-called groups of pieces are formed using onscreen overlapping which is described below.

Piece Overlapping Functions

The block of onscreen piece overlapping commands is located in the left button menu of the program.

Design1044.png

These commands allow performing so-called onscreen movements. They are designed for checking matching and configurations of lines between pieces and their parts.

Design1045.png

Overlapping Piece Points

In order to overlap a point of one piece with a point of another piece:

  • Press Design1046.png button. The cursor will take the form ofDesign1047.png
  • Specify the point (1) on the first piece where the movement will be performed to.
  • Specify the point (2) on the second piece which is to be moved.

Overlapping of the selected items to one point (1) will take place without any piece rotation (i.e. parallel movement of the piece on the screen will take place).

  • You can set the cursor onto points of another pair of pieces, etc. to continue working with the command.
  • In order to exit the command, press the right mouse button.
Design1048.png


Overlapping Piece Sections

In order to overlap two pieces by their sections:

  • Press Design1049.png button. The cursor will take the form ofDesign1050.png
  • Specify the first point (1) of the first (fixed) piece.
  • Specify the first point (2) of the second (moved) piece.
  • Specify the second point (3) of the first (fixed) piece.
  • Specify the second point (4) of the second (moved) piece.

When this command is executed, precise overlapping of the first point of the section into the first fixed point takes place while the second fixed point will determine rotation of the piece along the section from the first to the second fixed points.

  • You can set the cursor onto points of another pair of pieces, etc. to continue working with the command.
  • In order to stop the command operation, press the right mouse button.
Design1051.png


Overlapping Section Ends

In order to overlap pieces at the ends of sections: Press Design1052.png button. The cursor will take the form of Design1053.png

  • Specify the end of the line (1а) of the first (fixed) piece near its terminal point (1).
  • Specify the end of the line (2а) of the second (moved) piece near its terminal point (2).

When this command is performed, lines are overlapped at their ends, i.e. by their vector direction. Lines are overlapped until their configuration coincides.

Design1054.png
  • You can set the cursor onto lines of another pair of pieces, etc. to continue working with the command.
  • In order to exit the command, press the right mouse button.

Overlapping Section Ends on Extension

In order to overlap pieces at section ends on their extension:

  • Press Design1055.png button. The cursor will take the form of Design1056.png
  • Specify the end of the line (1а) of the first (fixed) piece near its terminal point (1).
  • Specify the end of the line (2а) of the second (moved) piece near its terminal point (2).

The line of the moved group will be overlapped onto the extension of the fixed line.

  • You can set the cursor onto a line of another pair of pieces to continue working with the command.
  • In order to exit the command, press the right mouse button.
Design1057.png


After one of the four overlapping commands described above has been executed, pieces interlock by the specified lines or points and form so-called groups. Outlines of grain lines of a group are highlighted in color. Grains for pieces of a new group will be colored differently.

The onscreen moving commands described above can be used for pieces collected in groups:

Design1057 1.png

Deleting Last Commands for Groups

In order to delete the last command for a group (groups) of overlapped pieces:

  • Press Design1058.png. If only one group has been created, “step-by-step rollback” is automatically activated for the actions performed with the group up to the very first one, i.e. until the button becomes locked.
  • If several groups have been created, when Design1059.png command is selected, the cursor takes the form of Design1060.png.

Position the cursor crosshair onto a piece of the required group and click the left mouse button.

Destruction of Groups

In order to destroy a group (groups) of overlapped pieces:

  • Press Design1062.png button. If only one group has been created, it will be automatically destroyed and the button will become locked.
  • If a few groups have been created, when Design1063.png button is selected, the cursor takes the form ofDesign1064.png.

Position the cursor crosshair onto a piece from the required group and click the left mouse button.

Visibility of Different Piece Elements on Screen

When there is a lot of visual information on the screen, it is difficult to deal with it. Sometimes it can be necessary to indicate a particular outline but it overlays another one… In order to solve such problems, you can deactivate visibility of some outlines, parameters, elements, etc. on the screen.

The button menu has a group of buttons designed for operating the visibility of piece elements.

Design1065.png

All types of piece elements are shown on these buttons. The button with the image of an element allows deactivating its visibility by clicking the left mouse button. The selected element is not removed from the screen but it becomes invisible.

Denominations of visibility buttons:

Design1066.png - Point Design1067.png -Piece name Design1068.png - Parameters of seams and constructions (cuffs, vents, …)

Design1069.png - Seam Design1070.png - Cut Design1071.png - Operating

Design1072.png - Inner outline Design1073.png - Grain Design1074.png - Inscription point


If visibility of a particular parameter needs to be deactivated on all pieces at once, the switch for operating all pieces should be activated:

Design1075.png

If you need to operate a single piece, set the switch to the single piece handling mode:

Design1076.png

When working in this mode, you need to position the cursor crosshair onto the selected piece and click the left mouse button, apart from clicking the visibility button of the necessary element.


Besides, the element whose visibility is deactivated will not be drafted when drawing the piece using a printer or a plotter.


The “Operating” outline appears only in projects where the Cut (not the “Ready view” (Seam)) has been set as the main one when assembling the outline. Another outline – “Operating outline” – automatically appears under the Cut outline in the “Piece Handling” mode. The purpose of this differentiation of outlines is as follows: When different modifications (Folded hem, Steps, Ledges, …) are performed on the Cut, all the operations are carried out with the cut, while the main “Operating” outline does not change. This allows obtaining these modifications as derived functions on the main outline along with the derivative seam outline (Ready view). When the main “Operating” outline changes, both the seam and the cut also change automatically.

Operating outlineCut Design1077.png

AttentionDo not forget to reactivate the element visibility (click the left mouse button on the switch). Otherwise, further operations with it will not be possible.

Setting Seam Parameters, Constructing Seams

The program allows setting seam allowances all round or on particular sections, as well as constant and variable seam widths.

Go to the window for operations with ready pieces Design1078.png to perform these functions.

Then, select the Pieces tab on the screen horizontal panel:

Design1079.png

In order to construct a seam from the main outline, a number of parameters need to be set:

  • Seam width
  • Type of the seam construction (from seam to seam, from cut to cut, etc.),
  • Seam construction mode (on a single section or all round for the entire piece).

There are several types of seams:

  • Seam width is the same on all piece sections
  • Seam width is different on different piece sections
  • The seam width is variable on a section, i.e. it is different at the beginning and at the end of the section.

Seam parameters are set for each section of the piece main outline. Each section has its beginning and end – 2 white terminal points. Which is the beginning and which is the end of the section is determined by the rule of the positive outline rounding – clockwise. In a closed outline the end of one section coincides with the beginning of another one, and the end of the last section coincides with the beginning of the first one. Besides two limiting points of the section – Terminal points, points of the outline color can be present on the section. They are Intermediate points which create the line curving.


“Seam Parameters” Window

Parameters are set in a special window. In order to retrieve the window:

  • Select the Pieces tab;
  • Execute Design1080.png command of the button menu. The mouse cursor will take the form ofDesign1081.png. Or execute the “Piece(s)/Set seam parameters” text menu item.
  • Position the cursor crosshair onto the section of the piece main outline where a seam needs to be constructed and click the left mouse button.

The section will be highlighted in color and the seam parameter window will be displayed on the screen:

Design1082.png


Operations in the “Seam Parameters” Window

  • Set the seam width
  • Select the seam type
  • Save the set seam parameters
  • Construct the seam
  • Go to the next piece section and repeat all operations

1) Setting the seam width

Click the left mouse button in the left box for setting the seam width Design1083.png and input the seam parameter for the specified section with regard to the sign: a positive value for constructing a seam inward the main outline, and a negative one for constructing outward.

The most commonly used seam parameter – 1cm. – is set automatically.


2) Selecting the seam type


The seam type determines the seam boundaries on the section: to the level of the adjacent section cut, to the level of the adjacent section seam, to a particular point, to the inner outline, etc.

The level to which the seam will be extended has to be set individually for the beginning and the end of the section. The left row of the seam type buttons in the “Seam parameters” window specifies parameters at the beginning of the section, while the right row is for the section end.


At the section beginning: And (similarly) at the section end:

Design1084.png

Design1085.png- from the cut; to the cut -


- from the seam; to the seam -


- from the normal line to the section start point; to the normal line to the section end point -


- from any point on the section; to any point on the section -


- from the inner outline; to the inner outline -


Setting Different Seam Types

“From cut to cut” seam type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From cut” Design1086.png.
  • Select the button of the seam type at the end of the section – “To cut” Design1087.png.

Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1088.png) needs to be executed.

Design1089.png


This results in constructing a seam from the specified section where the seam limiting points reach adjacent sections.


“From seam to seam” seam type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From seam” Design1090.png.
  • Select the button of the seam type at the end of the section – “To seam” Design1091.png.

Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1092.png) needs to be executed.

Design1093.png

This results in constructing a seam from the specified section where the seam limiting points reach the level of seams on adjacent sections.

The “seam to seam” type construction is used most frequently; therefore, this parameter is activated in the window automatically.


“From normal line to normal line” seam type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From normal line” Design1094.png.
  • Select the button of the seam type at the end of the section – “To normal line” Design1095.png.

Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1096.png) needs to be executed.

Design1097.png

This results in constructing a “hanging” seam from the specified section where the seam limiting points reach the level of the normal lines (perpendiculars) from the section terminal points.


“From point to point” seam type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From point” Design1098.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the first point of the section (2) –the seam starting point.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

  • Select the button of the seam end type on the section – “To point” Design1099.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the second point of the section (3) – the seam end point.

The parameter window, where the second selected button is also highlighted, is displayed on the screen again.


Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1100.png) needs to be executed.

Design1101.png

This results in constructing a seam on the part of the specified section where normal lines from the section Intermediate points are the seam limiting points.


Note


  1. The starting and end points of the seam are to be specified considering the positive rounding of the outline – clockwise.
  2. When performing this construction from the section Terminal points instead of Intermediate points, the “from normal line to normal line” seam type will be actually obtained.
  3. If two points on different sections are specified, construction will not be performed.

“From line to line” seam type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From line” Design1103.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the first contour line (2) crossing the section – the seam starting line.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

  • Select the button of the seam type at the end of the section “To line” Design1104.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the second contour line (3) crossing the section – the seam end line.

The parameter window, where the second selected button is also highlighted, is displayed on the screen again.

Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1105.png) needs to be executed.

Design1106.png

This results in constructing a seam on the part of the specified section where the levels of contour lines crossing the working section are the seam limiting points.

Note


  1. The starting and end contour lines are to be specified considering the positive rounding of the outline – clockwise.
  2. If two contour lines on different sections are specified, construction will not be performed.
  3. The contour lines crossing the section may not reach the section level precisely.

Seam types are specified separately for the section beginning and end, therefore any combinations of different seam types are possible, for example:


“From cut to seam” type:


After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From cut” Design1108.png.
  • Select the button of the seam type at the end of the section – “To seam” Design1109.png.

Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1110.png) needs to be executed.

Design1111.png


This results in constructing the seam where the limiting point reaches the section preceding the construction at the beginning and the seam following the construction section at the end.


“From point to line” seam type

After specifying the main outline section (1) and setting the seam width:

  • Select the button of the seam type at the beginning of the section – “From point” Design1111.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the point of the section (2) – the seam starting point.

The parameter window, where the selected button is highlighted, is displayed on the screen again.

  • Select the button of the seam end type on the section – “To line” Design1111.png.

The seam parameters window is removed from the screen so that it does not obstruct the visibility of the section.


  • Specify the contour line (3) crossing the section – the seam end line.

The parameter window, where the second selected button is also highlighted, is displayed on the screen again.


Then, you need to go to parameter saving and seam construction functions. For example, in order to save the parameters and construct a seam on a section, the “Record and construct” command (Design1112.png) needs to be executed.

Design1113.png

This results in constructing a seam where the seam limiting point reaches the point perpendicular to the specified intermediate point at the beginning, and to the specified line at the end.


3) Saving set seam parameters

- The “Record” command (Design1114.png) saves the current parameters for the selected section.

- The “Record for all sections” command (Design1115.png) saves the current parameters for all sections.


4) Constructing seams based on saved parameters

- The “Construct for current section” command (Design1116.png) constructs a seam on the section based on previously set parameters.

- The “Construct for all sections” command (Design1117.png) constructs a seam on all sections based on previously set parameters.


The functions of parameter saving and seam constructing can be joined together:

- The “Record and construct” command (Design1119.png) saves parameters for the section and constructs a seam based on these parameters on the specified section.

- The “Record and construct for all sections” command (Design1120.png) saves parameters for all sections and constructs seams on all sections.


Note The set seam parameters are saved to the database automatically. Even if seam construction is not performed, the parameters are saved and seams can be constructed using the previously set parameters at any time.


5) Going to another piece section


If the seam width is different on different piece sections, switch to another section of the piece (it is highlighted in color) after setting seam parameters and saving them on the first specified section using the “Record” command (Design1121.png), in order to set new seam parameters on it. Then, continue for all sections.

- Using the go to commands (Design1122.png) you can switch to the next or previous section (clockwise or counterclockwise along the outline), saving the parameter recorded for the previous section.

- Using the go to commands (Design1123.png) you can switch to the next or previous section (clockwise or counterclockwise along the outline), without saving the parameter recorded for the previous section.

For a piece with parameters that have already been created, this command can be used to view parameters for different sections.


- In order to go to the next section of the piece you do not have to use the go to commands. All you have to do is to specify the necessary section, set the cursor crosshair onto it and click the left mouse button. The section will be highlighted in color and you can either view previously saved data in the parameter window or input new parameters.


If the seam width is the same on all sections of the piece, seam parameters are saved for all sections at once by means of the “Record for all sections” or “Record and construct for all sections” commands (Design1124.pngor Design1125.png). In this case there is no need to go to another section.


Recommendation

A method for setting parameters of seams with different widths on sections:


  • The most frequently used seam width needs to be saved for all sections by means of the “Record for all sections” function (Design1126.png).
  • Use the go to commands Design1127.png to switch to the section where the seam parameter is to be different. The current section will be highlighted in color. A new width value is to be entered in the parameters window for this section and the seam type should be selected if it has to be changed. Save parameters for this particular section using the “Record” function ([[Image:]]).
  • Go to the next section with the seam width different from the previously entered one and repeat the input of new parameters of the seam, etc.
  • Execute the “Construct for all sections” command (Design1128.png). The seam will be constructed based on the previously set parameters on all sections.

6) Closing the parameter setting window


After saving seam parameters and constructing seams, press the “Cancel” button to close the “Seam parameters” window.


Special Modes for Seam Setting

1) “Variable width” mode


By default, a seam of a constant width at the beginning and at the end of the specified section is constructed. If a variable seam width is to be set for a section, Design1129.pngswitch should be activated. Then the second (right) box for setting the seam width at the end of the section becomes active along with the left window.


For example, on a section of the trousers rear cut, a variable seam is often made: at the top, near the waistband, the seam is 2.5cm, while at the bottom it is 1cm.


Design1130.png


2) “Disregard section” mode

Design1131.pngswitch allows excluding a section from the seam construction operation.


The sections where the “Consider section” box (Design1132.png) is unchecked in parameters, are skipped when the seam is constructed. When constructing the previous seam, the programme does not search for intersections with the seam of this section but finds the intersection with the next section.


The “Disregard section” mode is used for sections specifying the width of the adjacent seam (steps, turn up width sections, etc.).

Design1133.png
Design1134.png

Note

  1. The “Consider section” switch is activated automatically in the “Seam parameters” window.
  2. The “Disregard section” mode should not be used in a situation when there is no need to construct a seam on a section. Whether to construct a seam based on the set parameters or not is the matter of necessity of such constructions for completion of a particular task.
  3. Do not confuse the “Disregard section” parameter with the seam width parameter equal to zero. When zero width is set, the seam will still be constructed on the section but the seam line will not have any offset from the working section.

3) “Rounding” mode

Design1135.png

This mode allows obtaining a smooth and uniformly rounded seam on small rounded corner sections such as the collar end, the corner of a lapel or rever, flap, etc.

These angles are usually acute and the seam has to represent each point of the main outline along the normal line while maintaining the set width. Therefore, it may sometimes be difficult to obtain a nice seam line on such sections which is necessary for creation of supplementary stitching pieces and the ready view of collars, lapels and flaps.

This mode can be used in such cases. The construction will not maintain the seam width perfectly on any part of the rounded section, it will be provided at its ends only.

Design1136.png


Handling Seams


Seams can be constructed (or reconstructed) based on previously set parameters using buttons of the horizontal button menu:

Design1137.png - construct a seam on a separate section (or execute the “Piece(s)/ Construct seam on section” menu item);

Design1138.png - construct seams completely on a piece (or execute the “Piece(s)/ Reconstruct seams completely” menu item).

If a constructed seam needs to be deleted, select Design1139.png button of the horizontal button menu or select the “Piece(s)/ Delete derivative outline construction rules” menu item. When this command is selected, set the cursor crosshair onto the seam outline and click the left mouse button.


In order to display information about seam parameters on the screen, the mode of seam parameter visibility should be activated by selecting Design1140.png command of the outline visibility block.

Then, the seam construction command logo appears near each section: the type and size of the specified seam. The seam type on the logo is determined according to the seam type buttons in the “Seam parameters” window in the left and right rows – for the beginning and the end of the section.

The displayed information can be removed from the screen by means of another pressing of the same button.

Design1141.pngDesign1142.png


Note


  1. When the “Seam parameters” window is open on the screen, parallel execution of any onscreen operations (zooming, moving, etc.) is possible.
  2. The “From point to point” and “From line to line” seam types as well as “Rounding” and “Disregard section” modes make sense for individual sections of the piece only, and not for all sections of the piece. Therefore, when these parameters are selected, the commands for saving parameters for all sections at a time ([[Image:]] and [[Image:]]) will be locked.
  3. When working with the Cut main outline “1cm” seam parameter is automatically set for constructing seams inward the outline. When working with the Ready view main outline “-1cm” seam parameter is automatically set for constructing the seam outward the outline.

Seam Construction Example

A seam with the following parameters needs to be constructed on the piece of a stitched lower collar:

The seam of the collar middle part stitching together (section 1) – 1cm;

The seam of the collar stitching around (sections 5 and 6) – 0.7cm;

The seam of stitching the collar into the neck and gorge (sections 3 and 4) – 1cm.

Construction type: all-round, for all sections, “from seam to seam”

Design1143.png


  1. Select the Pieces tab and the “Set seam parameters” command (Design1144.png) in it.
  2. Specify the first section (1) of the main outline. The section will be highlighted in color and the seam parameter setting window will be displayed on the screen.
  3. “1cm” seam width (Design1145.png) and the “from seam to seam” seam type (Design1146.png) are set automatically in the window
  4. Select the “Record” command (Design1147.png) to save parameters on the first section.
  5. Execute Design1148.png command to go to the second section (2).
  6. Uncheck the box of the “Consider section” switch (Design1149.png) to exclude the section (2) from the seam construction operations. This is the section determining the width of the adjacent section seam (1).
  7. Execute the “Record” command (Design1150.png)
  8. Execute Design1151.png command to go to the third section (3).
  9. Check the box of the “Consider section” switch (Design1152.png). The previously set parameters (the seam width – “1cm” (Design1153.png) and the seam type – “from seam to seam” (Design1154.png)) are also suitable for this section (3).
  10. Execute the “Record” command (Design1155.png).
  11. Execute Design1156.png command to go to the next section (4).
  12. Parameters of the previous section (3) remain unchanged.
  13. Execute the “Record” command (Design1157.png).
  14. Execute Design1158.png command to go to the next section (5).
  15. The seam width is “1cm” Design1159.png and the seam type is “From seam to seam” Design1160.png#
  16. Execute the “Record” command (Design1161.png).
  17. Execute Design1162.png command to go to the next section (6).
  18. Parameters of the previous section (5) remain unchanged.
  19. Execute the “Record” command (Design1163.png).
  20. Execute Design1164.png command to go to the next section (7).
  21. Uncheck the box of the “Consider section” switch (Design1165.png) to exclude the section (7) from the seam construction operations. This is the section determining the width of the adjacent section seam (1).
  22. Execute the “Construct for all sections” command (Design1166.png).The seam is then constructed based on the previously set parameters on all sections.

In order to complete operation of the “Seam parameters” window, press the “Cancel” key.