Difference between revisions of "Constructor:Constructing seams"

From Julivi Help
Jump to: navigation, search
(→‎Construction of seams)
Line 1: Line 1:
 
== Construction of seams ==
 
== Construction of seams ==
−
 
 
  
 
      The program enables setting allowances for finishing (seams) all around, on all or individual sections, with a constant or variable seam width.  
 
      The program enables setting allowances for finishing (seams) all around, on all or individual sections, with a constant or variable seam width.  
−
 
−
 
 
  
 
In order to construct seams, select the '''SEAMS''' tab on the screen horizontal panel   
 
In order to construct seams, select the '''SEAMS''' tab on the screen horizontal panel   
Line 34: Line 31:
  
 
            The section will be highlighted in color and the seam parameter setting window will be displayed on the screen:
 
            The section will be highlighted in color and the seam parameter setting window will be displayed on the screen:
 +
<center>[[Image:embim2654.png|embim2654.png]] </center>
  
 
== Work order in the window «Seam parameters» ==
 
== Work order in the window «Seam parameters» ==

Revision as of 10:56, 27 March 2015

Construction of seams

      The program enables setting allowances for finishing (seams) all around, on all or individual sections, with a constant or variable seam width.

In order to construct seams, select the SEAMS tab on the screen horizontal panel   

embim2651.png  A number of parameters need to be set to construct a seam from the main outline:

  • Seam width
  • Seam construction type (from seam to seam, from cut to cut, etc.),
  • Seam construction mode (on one section or around the entire piece).

     

     There are several seam types:

  • The seam width is the same on all piece sections
  • The seam width is different on all piece sections
  • The seam width is variable on the section, i.e. it is different at the beginning and at the end of the section.

     Seam parameters are set on the main outline only, for each piece section. A section has its beginning and end – 2 white terminal points. The section beginning or end is determined by the positive piece rounding rule – clockwise.

Seam parameters are set in a special window which can be called up as follows:

  • Select the SEAMS tab and embim2652.png button in this tab. The cursor will take the form of embim2653.png.

The “Seams/Set seam parameters” text menu items can also be executed.

  • Hover the cursor crosshair over the piece main outline section where the seam is to be constructed and click the left mouse button.

            The section will be highlighted in color and the seam parameter setting window will be displayed on the screen:

embim2654.png

Work order in the window «Seam parameters»

Set seam width

Select seam type

Save set seam parameters

Construct seams according to saved parameters

Moving to a different section of a piece

Closing the window of setting parameters

Special modes of setting seams

Mode «Variable width»

Mode «Ignore section»

Mode «Rounding»

Organizing work with seams

Constructing seams by saved parameters

Deleting seams

Visibility of seam parameters

Example of constructing a seam

Example of using various seam types