Difference between revisions of "Constructor:Contour modifications"

From Julivi Help
Jump to: navigation, search
(→‎Constructing a Turn Up (fold))
(→‎Constructing a Turn Up (fold))
Line 233: Line 233:
 
<center>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [[Image:embim2824.png|embim2824.png]]</center>
 
<center>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; [[Image:embim2824.png|embim2824.png]]</center>
  
−
·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;http://www.6-string-videos.com/&nbsp; To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.
+
To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.
  
 
When [[Image:C:%5CDOCUME~1%5Cadmin%5CLOCALS~1%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_image007.jpg]]&nbsp;button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.
 
When [[Image:C:%5CDOCUME~1%5Cadmin%5CLOCALS~1%5CTemp%5Cmsohtmlclip1%5C01%5Cclip_image007.jpg]]&nbsp;button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

Revision as of 12:12, 16 March 2015

Step

The step (which is used for convenience of side aligning when stitching) is constructed based on the set seam width perpendicular to the specified side. In order to construct a seam step:

  • Select the SEAMS tab and embim2773.png button in this tab. The cursor will take the form ofembim2774.png. “Seams/Create a step” text menu items can also be executed.
  • Specify the section of the Cut (1), the seam step is to be constructed perpendicular to
  • Specify the second section (2), adjoining the first one. Then, a data input window will be displayed where the width of the seam on the first specified section is to be entered.
embim2775.png 
  • Press (“Yes”) button to confirm the data input and (“CANCEL”) to cancel.
embim2776.png 

On the variable seam section, the option should be activated (embim2777.png), and data are to be entered at the beginning and at the end of the section:

embim2778.png 

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image013.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created

Construct a corner

Corner   

If the seam allowance is to reproduce the piece outline precisely when pressing, a “corner” is constructed. This seam is used when constructing items without lining where seams are to look neater. A corner is created based on the specified seam width, the mirror-reflected forming side of the seam. In order to construct a seam corner:

  • Select the SEAMS tab and embim2779.png button in this tab. The cursor will take the form of embim2780.png.

      “Seams/Create a corner” text menu items can also be executed.

  • Specify the cut section (1), relative to which a seam corner is to be constructed mirror-reflected (1).
  • Specify the adjoining section (2). Then, a data input window will be displayed, where the width of the seam on the first specified section is to be entered.
embim2781.png   
  • Press (“Yes”) button to confirm the data input and (“CANCEL”) to cancel.
On the variable seam section, the option should be activated (embim2782.png), and data are to be entered at the beginning and at the end of the section:    
embim2783.png

When  [[Image:]] button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

«Fox ear»

 “Fox Ear” construction is a corner cut as per the set width parameters of adjoining sections. In order to construct a “Fox Ear”:

  • Select the SEAMS tab and embim2784.png button in this tab. The cursor will take the form of embim2785.png.   

“Seams/ ‘Fox Ear’” text menu items can also be executed.

  • Specify the first (1) section of the Cut and the second (2) adjoining section (clockwise).  

A window is displayed on the screen where values are to be entered instead of default ones:

embim2786.png
  • To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.
embim2787.png
Apart from the standard “Fox Ear” construction, other construction designs can be selected: cutout of an allowance on seam continuation and perpendiculars to seams; corner cutting of with the specified offset value; corner rounding with the specified offset value or with the specified radius.

On the variable seam section, the option should be activated (embim2788.png), and data are to be entered at the beginning and at the end of the section    

embim2789.png

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image013.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

|| FEATURES:                                     1. Sections (1, 2) are to be specified next to their common terminal point.


2. Sections are to be specified clockwise, especially on open inner outlines.  

Construct a Ledge

In order to construct a ledge based on two points on the piece cut outline:

  • Select the SEAMS tab and embim2790.png button in this tab. The cursor will take the form of embim2791.png.

      “Seams/Construct a ledge” text menu items can also be executed.

  • Successively specify 2 points of the section (1 and 2) where the ledge is to be constructed.

·         A parameter window is displayed on the screen where the ledge type and width are to be specified. 

embim2792.png

      When specifying the width parameter with the plus sign, the ledge will be constructed inward the detail; when setting a value with the minus sign, the ledge will be constructed outward.

·         To confirm the data input, press «Да» (“Yes”) button. In order to cancel, press(“CANCEL”) button.

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image008.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

Construction Options:

    Option #1:  

In the “Normal line to limiting points” mode, the ledge is perpendicular to the line in points 1 and 2:

embim2793.png

 

 

Option #2:

In the “Random/ bevel/” mode, intersection searching options are active (embim2794.png): when activating the option at the beginning (1) or at the end (2) of the section (in the order of point specification), the intersection of the two sections adjacent to this point will be found.  

      The appearance of the window in the mode depends on the type of the specified points: Terminal or Intermediate point. For Intermediate points a bevel value window is displayed instead of intersection options. This is because there is no intersection of adjacent sections in such a point.

 
embim2795.png


Option #3:

When the switch in the width window (embim2796.png) is activated (embim2797.png), a ledge of a variable width can be constructed by setting parameters in the first and second windows for the beginning and the end of the section. 


Way 2

 

                             In order to construct a ledge from the point on the Cut outline:

  • Select the SEAMS tab and embim2798.png button in this tab. The cursor will take the form of embim2799.png.

      “Seams/Construct a ledge” text menu items can also be executed.

  • Specify the initial point (1) for the construction by double pressing the left mouse button.
  • The parameter window is displayed on the screen where the construction type and the ledge width are to be entered.
embim2800.png;   embim2801.png

In the additional window (embim2802.png) parameters of the ledge length from the point (1) are to be set: clockwise in the “+” window and counterclockwise in the “–” window along the outline.

·         To confirm the data input, press «Да» (“Yes”) button. In order to cancel, press (“CANCEL”) button.

Options for operating with “Direction” parameter:

1)       “Normal line to the ledge central point”

Lateral sides of the ledge are perpendicular to the line in the central point.

2)  “Normal line to the limiting points”:

Lateral sides of the ledge are perpendicular to the line of the ledge in its terminal points.

3)       “Arbitrary construction”:

When this switch is activated, a bevel will be constructed. For this purpose, in the windows of the section beginning or end respectively (clockwise), the bevel value is to be specified:

embim2803.png embim2804.png

Figured Cutout

The function allows constructing a V-shape or П-shape cutout or a ledge of the set size on the normal line to the specified point or in a set direction. For this purpose:

·           Select the SEAMS tab and embim2805.png  button in it. The cursor will take the form of embim2806.png

       “Seams/ Figured cutout” text menu items can also be executed.

·           Specify the point (1) on any outline. Then, the window of construction parameters is displayed on the screen:

embim2807.png

·           Select the required construction type by activating the П-shape embim2808.pngor V-shape embim2809.pngcutout option  

·           Enter the cutout width and length: “+” – a cutout inward from the outline, “-” – a ledge outward from the outline.

·           To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.

·           When “Repeated function” option is activated, the same ledge is created in all the specified points.

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image008.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

 

A V-shape ledge can be used for creating outward notches on ravel-prone fabrics. A П-shape ledge can be used for aligning the piece cut with the stitching template.

 

 embim2810.png embim2811.png

    In order to construct a figured ledge in the specified direction, press the  <CTRL> key on the keyboard after selecting the command and specify point (1) and point (2), determining the direction. Further actions are similar to operating in the general mode.

embim2812.png

The construction can be used for tacking pieces (tacking of the inclined pocket entrance, etc.).

Construct a Corner Ledge

In order to construct a ledge from an outline corner point:

·         Select the SEAMS tab and  embim2813.png  в button in this tab. The cursor will take the form of embim2814.png.

     “Seams/ Corner ledge” text menu items can also be executed.

·         Specify corner point (1) of the piece.

A data entry window is displayed on the screen where the ledge parameters are to be entered:

embim2815.png embim2816.png

 

Length: “plus” –constructing clockwise, “minus” – constructing counterclockwise from the point.

Width: “plus” –constructing the ledge inward from the outline, “minus” – constructing outward.

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image009.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

 

Parameter window handling variants:

1)      When the option is activated  (embim2817.png), the variable value of the ledge width can be introduced by entering data in the first and second windows respectively for the beginning and the end of the ledge section:

embim2818.png         

2)    In order to create a ledge with a bevel, the bevel parameter is to be entered in  embim2819.png window.

3)     If embim2820.png (“Continue the Section”) parameter is deactivated, the section will not be continued, and a point will be constructed on the ledge bend (at the specified seam level).

embim2821.png

If a turn up is to be added on at the bottom later, after constructing a ledge (for example, for a sleeve vent), the introduced bend point will not allow performing this construction. In this case, the “Continue the Section” function is to be activated.

Constructing a Turn Up (fold)

In order to construct a turn up, a bottom hem seam allowance or a one-piece cuff, the following should be done:

  • Select the SEAMS tab and embim2822.png  button in this tab. The cursor will take the form of embim2823.png.

      “Seams/Cuff” text menu items can also be executed.

  • Specify the piece section – the line of the cuff or bend fold. 
  • A turndown parameter window is displayed on the screen where the type of the turn up construction, the number of turn up and the turn up width need to be specified:
        embim2824.png

To confirm the data input, press (“Yes”) button. In order to cancel, press (“CANCEL”) button.

When File:C:\DOCUME~1\admin\LOCALS~1\Temp\msohtmlclip1\01\clip image007.jpg button of the on-screen menu is activated, the logo of this construction on the Cut can be seen on the screen. When the function is performed on the main or any other outline, the construction logo is not created.

 

 

E.g.:

1) In order to construct a standard bottom turn up 4cm in width, the seam parameter 4, is to be set in embim2825.png window; default values are to be left for the other parameters.

embim2826.png

2) In order to construct a double turn up , the number of turnups is to be entered in embim2827.png window, and embim2828.png button is to be pressed. In the window for setting the second, third, etc. width, the values of the turn up are to be entered in sequence from the turndown level

embim2829.pngembim2830.png

3) In the “Tangent” mode of the “Symmetry or mirror” window (embim2831.png), the turn up lateral sides are symmetrical to the upper part relative to the tangent to the bottom line in the bend point.

In the “Chord” mode, the turndown lateral sides are symmetrical to the upper part relative to the straight line (chord) joining the turndown points.

embim2832.png

4) In order to construct a variable width cuff, the variable width mode with an additional window is to be activated inembim2833.png window and parameters of the section beginning and end (clockwise along the outline)

embim2834.pngembim2835.png

5) If construction is not required at one end of the section (for example, on the sleeve vent for the further construction of the stitching corner, etc.), the construction parameter can be deactivated at the beginning or at the end of the section respectively: embim2836.png


In this case a bend point will not be created, while the lines of the sections adjacent to the cuff will be prolonged to their intersection:

 
embim2837.png


6) When constructing a hem, narrowing or widening values of its ends can be set by entering values with “+” (for widening) and “–” (for narrowing) in the “Widening” field:

embim2838.png embim2839.png

Widening (narrowing) is performed along the tangent to the hem bottom line in the terminal (corner) points. The value for the first corner point is entered into the left cell while the value for the second end is entered into the right cell.

 

Corner of a sleeve vent

Growing a contour

Cone

Processing a dart

Processing a box pleat

«Bezier» curve

Constructing corners and indents equal by height

Corner by a second piece

Equated indent by a second piece

Equated corner by a second piece

Draw (remove) a gash on a cut

Insert a gash at a cut

Point at a line crossing

Point at a normal to a line

Move a point along XY

Move a point in a direction by...

Aling a cut point vertically (horizontally)

Deleting indents, corners

Aling a dart point

Canceling a performed modification

Reconstructing a performed modification

Examples of modifications

Example №1

Example №2

Example №3