Difference between revisions of "Constructor:Moving a section"

From Julivi Help
Jump to: navigation, search
(→‎Move a section to a point)
(→‎Move a section to a point)
Line 195: Line 195:
 
* Press the YES button to confirm input of data, press CANCEL to cancel.  
 
* Press the YES button to confirm input of data, press CANCEL to cancel.  
  
−
FEATURES 1) If a end point is specified on the section, both adjacent sections joining in this point, will be moved.  
+
[[File:embim1584.png]] 1) If a end point is specified on the section, both adjacent sections joining in this point, will be moved.  
  
 
2) When working with an unlocked inner contour in the mode “Without deformation of adjacent sections”, 2 sections will be created locking the moved section with adjacent sections, <u>and the whole contour will also be locked.</u>
 
2) When working with an unlocked inner contour in the mode “Without deformation of adjacent sections”, 2 sections will be created locking the moved section with adjacent sections, <u>and the whole contour will also be locked.</u>

Revision as of 17:54, 5 March 2015

Move a section along Х

The function allows to move a section along the Х axis.

To move a section along Х axis:

  • Select the SECTION tab and the button Embim1803.png in this tab. The cursor view is changed to Embim1804.png .

You can also follow the text menu points “Section/ Move along Х”.

  • Specify the section (1). The window for input of data is displayed on the screen:
Embim1788.png


  • Set the movement value in the input line. The movement direction is defined along the Х axis: to the right – positive value, to the left – negative value.

You can input values different in size manually (buttonEmbim1619.png), or from the buffer (button Embim1618.png) .

Set the switch for shifting modes Embim1800.png to a necessary position:

The YES button: move a section with deformation of adjacent sections,

The NO button: move a section without any deformation.

Embim1809.png
  • Press the YES button to confirm input of data, press CANCEL to cancel.

Embim1810.png 1) You can move several sections of the same piece at once.

To do so, after selection of the function hold the <Shift> key on the keyboard and specify the sections to be moved clockwise.

  1. The function is applicable to a group of superposed pieces. To do so:
    • Create a group of pieces with the help of the commands for superposing ( the buttonsEmbim1679.png Embim1680.png Embim1681.png Embim1682.png of the screen menu)
    • Perform the function according to the work description, while holding down the <Shift> key on the keyboard and specifying the sections to be moved on different pieces of the group
Embim1815.png

Move a section along Y

The function for moving a section along Y axis is similar to the function Moving a section along Х Embim1803.png with the difference in setting the sign for movement: up – positive value, down – negative value (the button Embim1817.png or the menu points “Section/ Move a section along Y”).

Move a section in direction by

The function allows to move a section along the direction of a different section (for example, to move an indention section when correcting the seam length).

To move a section along the direction of a different section:

  • Select the SECTION tab and the button Embim1818.png in this tab. The cursor view is changed to Embim1819.png.

You can also follow the text menu points “Section/ Move a section in direction by…”.

  • Specify the section (1) to be moved.
  • Specify the directing section (2) next to the end setting the movement direction.

The window for input of data is displayed on the screen:

Embim1820.png
  • Set the movement value in the input line.

The movement direction is set with a directing section (2): increase a section – positive value, decrease a section – negative value.

You can input values different in size manually (buttonEmbim1619.png), or from the buffer (button Embim1618.png) .

Set the switch for shifting modes Embim1800.png to a necessary position:

The YES button: move a section with deformation of adjacent sections,

The NO button: move a section without any deformation.

  • Press the YES button to confirm input of data, press CANCEL to cancel.
Embim1824.png

Embim1584.png 1) A place of click on the directing section is important, because positive direction of movement will be calculated based on the specified end.

2) Any other section of any piece contour as well as a section adjacent to the one to be moved can be used as a directing section

Move a section along a curve

The function allows to move a section of an inner contour along a curved section.

To move a section along a curve:

  • Select the tab SECTION and the button Embim1826.png in the tab.  The cursor view is changed to Embim1827.png.

You can also follow the text menu points “Section/ Move along a curve”.


  • Specify the section to be moved (1)
  • Specify the section on the other contour (2), along the curve of which the movement will be performed.
Embim1828.png


The window for input of data is displayed on the screen:


Embim1829.png


  • Set the movement value in the input line. The movement direction is defined according to the clock dial direction: move along the section clockwise – plus, move counter-clockwise – minus.

You can input values different in size manually (buttonEmbim1619.png), or from the buffer (button Embim1618.png).

  • Press the YES button to confirm input of data, press CANCEL to cancel.

The function can be used to move inner contours (model lines, special sight sections - notches, etc.) along the piece contour curve.

Move a section along Х, Y

The function for moving a section in the coordinate axes step-by-step and viewing the path and value of movement. To move a section:

  • Select the SECTION tab and the button Embim1832.png in the tab. The cursor view is changed to Embim1833.png.

You can also follow the text menu points “Section/ Move along ХY”.

  • Specify the section to be moved. The window with movement parameters is displayed on the screen:
Embim1834.png


  • Set the movement direction with clicking the buttons with direction arrows. The movement of the section will be visually displayed on the screen (red color contour)

The movement value upon one click is set with a value set in the STEP window.

If the movement value is known, it can be input in the windows DX and DY and press the button Embim1636.png .


Set the switch for shifting modes Embim1800.png to a necessary position:

The YES button: move a section with deformation of adjacent sections,

The NO button: move a section without any deformation.

  • Press the YES button to confirm input of data, press CANCEL to cancel.

Embim1584.png 1) The movement value is the same for all sizes of a graded piece.

2) Location of coordinate axes is important. If you rotate them (the button Embim1838.png on the panel for work with axes) and set the movement along Х and Y, the section will be moved in these rotated coordinates.

Move a section

The function allows to set arbitrary movement of a section. To do so:

  • Select the SECTION tab and the button Embim1839.png in this tab. The cursor view is changed to Embim1840.png . You can also follow the text menu points “Section/ Move”.
  • Specify the section and drag the cursor with the section around the screen without releasing the mouse button. Release the button after setting the necessary movement. The following request is displayed on the screen:


Embim1841.png


Set the switch for shifting modes to a necessary position:

The YES button: move a section with deformation of adjacent sections,

The NO button: move a section without any deformation.

  • Press the YES button to confirm input of data, press CANCEL to cancel.

Embim1584.png In some situations (incorrect archiving of pieces, etc.) pieces overlap, and you need to move a section aside to delete an extra one. There is a special mode of this function: movement of a section with contour tear.

To move a section this way, press and hold the <CTRL> key right after selection of the function button.

Embim1843.png


When the main contour (Working Cut) is unlocked, the derivative Cut contour remains locked.

After an unnecessary section is deleted, the section must be restored to the same place (with the command “Section/ Move section to a point» (Embim1844.png)), or perform the command “Contour/ Lock” (Embim1845.png).

Move a section to a point

The function allows to move a section with anchoring it in a necessary point of the piece.

To move a section to a point:

  • Select the SECTION tab and the button Embim1846.png in the tab. The cursor view is changed to Embim1847.png. You can also follow the text menu points “Section/ Move to a point”.
  • Specify a fixed point of the piece (1), to which the section will be moved
  • Specify a point (2) of the section to be moved, which will be superposed with the fixed point. The following request is displayed on the screen:


Embim1841.png


Set the switch for shifting modes to a necessary position:

The YES button: move a section with deformation of adjacent sections,

The NO button: move a section without any deformation.

  • Press the YES button to confirm input of data, press CANCEL to cancel.

Embim1584.png 1) If a end point is specified on the section, both adjacent sections joining in this point, will be moved.

2) When working with an unlocked inner contour in the mode “Without deformation of adjacent sections”, 2 sections will be created locking the moved section with adjacent sections, and the whole contour will also be locked.