Difference between revisions of "Constructor:Increment table"

From Julivi Help
Jump to: navigation, search
(→‎Specifics of grading by measurement data)
(→‎Specifics of grading by measurement data)
 
Line 737: Line 737:
 
1) Grading must be performed by sizes and heights, as well as by corpulence data precisely in accordance with the type and direction of grading of the measurement property itself.  
 
1) Grading must be performed by sizes and heights, as well as by corpulence data precisely in accordance with the type and direction of grading of the measurement property itself.  
 
In other words, if a measurement property can be graded by sizes, by heights, horizontally, and vertically, it needs to be input in the increment table in the mode «by sizes», then «by heights», and input data in the cell Х or У – according to the assortment (position) of pieces.  
 
In other words, if a measurement property can be graded by sizes, by heights, horizontally, and vertically, it needs to be input in the increment table in the mode «by sizes», then «by heights», and input data in the cell Х or У – according to the assortment (position) of pieces.  
 +
 
2) ATTENTION! Input of increments in a point must be done considering previously input data in the adjacent points.  In other words, consider the REFERENCE point of the increments, and «grow» formulas gradually, adding to the existing sizes the following, new data.   
 
2) ATTENTION! Input of increments in a point must be done considering previously input data in the adjacent points.  In other words, consider the REFERENCE point of the increments, and «grow» formulas gradually, adding to the existing sizes the following, new data.   
 
Example: Grading a neck point vertically (coordinate Y) equal to measurements «Nape to waist»  «NW». Then vertical grading of the point of the neck top in the back, equal to 1/3 of  neck lsize «[0.3]*NS»,  must be performed taking into account the first move. As a result, we have an expression: «NW+ [0.3]*NS»
 
Example: Grading a neck point vertically (coordinate Y) equal to measurements «Nape to waist»  «NW». Then vertical grading of the point of the neck top in the back, equal to 1/3 of  neck lsize «[0.3]*NS»,  must be performed taking into account the first move. As a result, we have an expression: «NW+ [0.3]*NS»
 
Expression for filling in the Y axis cell is composed the same way:  
 
Expression for filling in the Y axis cell is composed the same way:  
 
<center> [[Image:embim3355.png|embim3355.png]] </center>
 
<center> [[Image:embim3355.png|embim3355.png]] </center>
 +
 
3) If an expression, valid only for some sizes, must be input, it is possible to use the table «Size database» to input graded values–coefficients.   
 
3) If an expression, valid only for some sizes, must be input, it is possible to use the table «Size database» to input graded values–coefficients.   
 
For example: for sizes 44-52 an expression 0,5*TA must be input
 
For example: for sizes 44-52 an expression 0,5*TA must be input
Line 746: Line 748:
 
for 62-68 – expression 0,5*(1,75*TA)
 
for 62-68 – expression 0,5*(1,75*TA)
 
Coefficient (К1) must be input in the tab «Variables» of a given size database. Recalculation from 1,25 to 1250 will be performed, so it is necessary to input an expression «К1/1», and fill in the table as a table of linear values (1,25, 1,75,…).
 
Coefficient (К1) must be input in the tab «Variables» of a given size database. Recalculation from 1,25 to 1250 will be performed, so it is necessary to input an expression «К1/1», and fill in the table as a table of linear values (1,25, 1,75,…).
 +
 
4) When a model is opened again in the working window of the program, or when performing actions of copying models («Object/ Save as»), set size database and expressions with size properties will be saved.   
 
4) When a model is opened again in the working window of the program, or when performing actions of copying models («Object/ Save as»), set size database and expressions with size properties will be saved.   
 
ATTENTION! It is important to remember the danger of a repeat grading by these formulas, if after grading a point, increment required correction (by data of the buffer of «Seam algebra», etc.).
 
ATTENTION! It is important to remember the danger of a repeat grading by these formulas, if after grading a point, increment required correction (by data of the buffer of «Seam algebra», etc.).
 +
 
5) unctions of transferring increments from a point to a point [[Image:embim3356.png|embim3356.png]] will be blocked.  
 
5) unctions of transferring increments from a point to a point [[Image:embim3356.png|embim3356.png]] will be blocked.  
 +
 
6) If «Rollback» was performed after inputting a formula and grading, graded nest will be restored to its initial view, but the formula will not be automatically canceled in a given point. It needs to be changed, or input increments in a point using a different mode (for example, size by size). In other words, if the function. «Grade» [[Image:embim3357.png|embim3357.png]] is not performed specifically for this point, grading by formula will not be performed.  
 
6) If «Rollback» was performed after inputting a formula and grading, graded nest will be restored to its initial view, but the formula will not be automatically canceled in a given point. It needs to be changed, or input increments in a point using a different mode (for example, size by size). In other words, if the function. «Grade» [[Image:embim3357.png|embim3357.png]] is not performed specifically for this point, grading by formula will not be performed.  
 +
 
7) Piece copies will not save a set of input expressions with measurement data.  
 
7) Piece copies will not save a set of input expressions with measurement data.  
 +
 
8) This grading mode can be used for Children's assortment, or to grade by Measurement table, sent by a client-firm. The program «Size database» has an option to input such a table by following menu points «Data/ File import*.xls».  
 
8) This grading mode can be used for Children's assortment, or to grade by Measurement table, sent by a client-firm. The program «Size database» has an option to input such a table by following menu points «Data/ File import*.xls».  
 +
 
9) The function of opening a table from file ([[Image:embim3358.png|embim3358.png]])  is performed only for the format ОХР. But if «company» Measurement table, set as a table in Excel  format (extension .xls), is opened from file in the program «Size database» and is saved, it will be transformed into the format ОХР and can be used in the Increment table.
 
9) The function of opening a table from file ([[Image:embim3358.png|embim3358.png]])  is performed only for the format ОХР. But if «company» Measurement table, set as a table in Excel  format (extension .xls), is opened from file in the program «Size database» and is saved, it will be transformed into the format ОХР and can be used in the Increment table.
  

Latest revision as of 11:16, 24 March 2015

Piece grading is performed by entering increments in piece points.  For grading select a piece point, enter an increment value in the table and use a grading command.

     To open the Increment Table select the button embim3120.png in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the program text menu. The Increment Table will appear.

embim3121.png

Increment Table Functions

The working window "Increment" includes a range of functions and a table of increment values. In the left column the increment values for the X axis are displayed, the right column features increment values for the Y axis.

Depending on the selected grading  type( by sizeembim3122.png,  by height embim3123.png, by fullnessembim3124.png), the table displays the list of sizes, lengths and fullnesses of the working model:

 embim3125.png

     The increment value of graded pieces in a particular point is displayed, if you move the cursor and left click it.

     The basic size is an original grading size, therefore the shape of the basic piece doesn't change during the grading, the row is zeroed in the table. Piece grading in regard to the table data is drafted starting from the basic size, moving upwards and downwards in the scale size by size.  The increment sign, indicating the grading direction, is set from smaller to bigger size.

 embim3126.png


Point parameters control

     The increments are set only in End and Control intermediate piece points.

     The status of the intermediate point is important for grading:

The increment should be entered in Control intermediate point ( embim3127.png) otherwise all the grading sizes will be limited to one point (zero increment).

Intermediate points ( embim3128.png) don't have increments, they move proportionally to the increment of the adjacent Control points during grading.      This feature of Intermediate points can be used for grading. For example, the increment of the shoulder (1) and lower (2) points of the back armhole is defined. The point in the armhole segment (3) can be automatically graded proportionally between two points (1 and 2), if it has the Intermediate point status. In case of a Control point, the increment should be entered, otherwise all the size lines will be limited to one point. The function embim3129.png - "Point/ Change point status" is used to change the point parameters.

embim3130.png

Recommendation: When grading is finished, the status of Control intermediate point should be restored for the point (the actual increment is corrected, if needed). Otherwise, according to the Intermediate points characteristics, the point will move with the adjacent shifting points.       Functional points (embim3131.png), as a type of Intermediate points, don't need grading. Their position in grading depends on the increments of adjacent points and their own functions (segment division in a given proportion or a fixed offset from a point).   

The main functions of the Increment table

Operating modes in a coordinate system:

embim3132.png embim3133.png - Increments in inner and screen coordinate systems.

The increment values in an inner coordinate system can be defined in regard to the piece position in the base, in a screen system they are identified in regard to the screen axes position or the piece on the screen.

Piece grading types:

embim3134.png embim3135.png embim3136.png -.by size, by height/ or by fullness

      Blocking of these modes is defined by the scale type of the working model:

embim3137.png - The length and fullness modes are switched off in the Size scale;

embim3138.png - The grading by fullness mode, is switched off in the Length size scale;

Piece grading modes:

 embim3139.png embim3140.png embim3141.png embim3142.png - Four piece grading modes

1st: Equal increments for all sizes (for even grading)

2nd: Increments for each size (for uneven grading)

3rd: Increments with steps (for grading by size ranges)

4th: Grading by measurements

Increment types:

embim3143.png embim3144.png - Interdimensional and Total increment.

The increments, entered into the table, are either distributed between sizes (gradually from size to size) or summarily between extreme grading sizes (then the increment value is divided by the number of intermediate sizes).

Work with point groups functions :

embim3145.png embim3146.png embim3147.png embim3148.png - To Set a point group; To Add or Delete a point in a group; To Destroy a group.   

The functions allow to create and correct point groups with even increments for simultaneous grading of different points of one or a few pieces. Grading command:

embim3149.png - Perform grading according to selected parameters and values.

Process launch by selected values, with regard to the active operating modes of the table.

Special functions of the Increment Table

Functions of Increment Copying: embim3150.png embim3151.png embim3152.png - Full increment copying or separate copying by Х, У coordinates. The functions enable copying the increment value from the selected point to a few other points either fully or by one coordinate (X or Y). Increment zeroing modes: embim3153.png embim3154.png - Increment zeroing by all or current sizes.

Point regrading functions:

embim3155.png embim3156.png - Point regrading between sizes and for full piece grading.

The functions allow even distribution of the current increment in the point between two selected sizes or for full grading at once.

      Additional functions:

embim3157.png - Increment calculation in the set direction.

The point increment moves along the line, selected on the screen (tangentially in the end point).

embim3158.png - Increment calculation by two adjacent points.

Proportional calculation of the point increment between the increments of two selected segment points.


     Table completion functions:

embim3159.png - Fill in the table with initial increments

embim3160.png - Destroy the point link (the recent increments are cleared in the table)

embim3161.png - Move the values from the value input box by Х, У into the table cells

embim3162.png - Change the increment sign by Х, У

embim3163.png - Insert the increments by Х, У from the program "Calculator"

embim3164.png embim3165.png - Save the increment in the buffer and calculate the current increment from the buffer

Increment table movements on the screen

To move the table window to a suitable place, do the following:

  • Click the upper panel of the table window.
  • Holding the mouse button, move the table to the suitable place.
  • Release the mouse button to fix the window position.

During next display, the table will appear in the set position, unless the program has been restarted.

Work with the Increment Table

     Main working plan:

1.      Open the Increment table

2.      Select the grading feature: grade

3.      Select the grading mode: even, unven, with steps, by measurements

4.      Select the increment type: interdimensional or total

5.      Create point groups

6.      Select a grading point

7.      Enter an increment of the selected point

8.      Perform grading

9.      Move to the next piece points

10.  Move to drop, spec grading

11.  Close the Increment table

12.  Save the piece

Open the Increment table

To launch the Increment Table window, select the button embim3166.png in the screen button menu or go to steps "Window/ Display (Hide) Increment Table" in the text menu.

 The Increment table will be displayed:

embim3167.png

Grading feature choice

For piece grading by size, by length or by fullness choose  the button embim3168.png, embim3169.png, orembim3170.png of the corresponding grading feature should be switched on.

By size grading is turned on by default, the mode is enabled automatically, when the table is launched. If only  by size grading is applied, length or by fullness features are blocked.

Grading mode choice

The grading mode is enabled by choosing one of the four buttons of the table embim3171.png embim3172.png embim3173.png embim3174.png, for even grading,

unven grading, grading with steps, by measuring of the program "Size base".

1st mode embim3175.png: Even increments for all sizes

Building of even piece grading, one increment value is entered for all sizes.

Interdimensional increments embim3176.png: the value is set between the sizes, from small to big size.

embim3177.png

Total increments embim3178.png: the value is set summarily between extreme grading sizes and is evenly divided by the number of intermediate sizes

embim3179.png

2nd mode embim3180.png: Increments for each size (for uneven grading)

Creating uneven grading, different increment values are entered for each size.

embim3181.png

3rd mode embim3182.png: Increments with steps (for grading by size ranges)

Creating grading by size ranges, with increment steps.

Interdimensional increments embim3183.png: the increment value is set between sizes in the selected range, from small to big size.

embim3184.png

Total increments embim3185.png: the value is set summarily between extreme range sizes and is evenly divided by the number of intermediate sizes inside each range.

embim3186.png

     To set increment steps, select the grading range limits by clicking the row with the required size, starting from the outer size of the first range. The row choice is canceled by right-clicking the mouse. The selected rows are highlighted.

     Don't select the very first row of sizes, but select the bigger size row of the first range (as the smaller size is always the upper limit of the first range).

embim3187.png

        Functions of work with ranges:

embim3188.png - Set the increment ranges

embim3189.png   - The list of increment range variants

embim3190.png - Clearing the lists of increment range variants.

 

A few range variants can be created for a single model grading.

Having created the first range (as described above), in order to enter a new range, select the command embim3191.png and enter the limits of increment steps. This variant is described in a list of ranges asembim3192.png. <cenetr> embim3193.png </center>

4th mode embim3194.png: Grading by measurements

Additional grading range, in which the abbreviations of measurements are entered instead of numerical values (Bs – Breast semicircumference, Sw – Shoulder width etc.).

The work in this mode is described in detail in the chapter about Increment table special functions.

Creating groups of points

Different piece points can have identical increment values. In this case they can be merged into groups, and the increment value can be set for the whole group at once.

The point groups are created separately for grading by size, length or fullness.

To create a point group:

  • Select a button in the table embim3195.png. The cursor will change like this embim3196.png.
  • Select the points of one or a few pieces in turns, for which one increment value should be entered. The selected points are highlighted.
  • Finalize the choice by right-clicking the mouse button and repeat the steps for all other points.

 If the wrong point has been selected for the group, use the commands embim3197.png of the screen menu to cancel the operation.

ADDITIONAL MODE

 

 

A point group can be set by highlighting the capture area in the screen.               Do the following:

After selecting the function button embim3199.png press (without holding) the <SHIFT> key on the keyboard.

  • Holding the left mouse button, move the cursor across the screen, highlighting the area around the points of one group.
  • Release the mouse button to fix the area.

Commands for work with point groups:

1) Adding new points to an old group:

  •  Select a button in the table embim3200.png. The cursor will change like this embim3201.png.

Select any point in the group.

  • Select a point or a few points in different pieces, which have to be included in the group.
  • Finalize the points choice by right-clicking the mouse button.

 

2) Deleting the point from the group:

  • Select a button in the table embim3202.png. The cursor will change toembim3203.png.
  • Indicate a point or a few points to be deleted from the group.
  • Finalize the points choice by right-clicking the mouse button.

 

3) Destroying the point group:

  • Select a button in the table embim3204.png. The cursor will change to embim3205.png.
ADDITIONAL MODE

 

Select a point in the group to be deleted

If you select a point, holding the <CTRL> key,

all the groups of the selected piece will be destroyed (but

by a single working grading feature: grading by size, length or fullness).

If the groups are created for a few pieces, they'll be destroyed in the selected piece, but preserve in the others.

 

 

ATTENTION! If a piece and its copy ("no name" or with a name) are in the screen, and there are point groups, both pieces will be graded simultaneously.

It helps to grade "common" points of Top and Lining simultaneously, without creating special point groups for them.  

If such parallel grading isn't needed, only one piece should be displayed in the screen. If point groups aren't created, the pieces will grade independently.

Entering increment of the selected point

            To enter increments do the following:

  • Indicate grading point in the piece.

ATTENTION! Work with the Main contour points (Working and Ready View), the secondary contour will be changed automatically. If you try to select the secondary contour Cut, nothing happens in the Action table.

 

  • Input the increment value separately for X and Y coordinates accordingly in the left and right windows of the lower part of the table.

Press the button embim3207.png to transfer this value into the table cells.

embim3208.png

You can also click the button with the required size or enter the values separately in each cell to fill in the table after entering the data in the lower windows. Click in the required cell and enter the increment value.

The value is entered by the selected mode and grading type (interdimensional and total).

ATTENTION! In all the grading modes embim3209.png embim3210.png embim3211.png embim3212.png the sign of the entered values ("+" or "-") sets the direction of the grading. The increment sign by X (left column) or by Y (right column) is set by the coordinate axes, from smaller to bigger.

     Table completion functions:

embim3213.png - Fill in the table with initial increments

After entering the new increments in a previously graded point, this function can help to view the initial increments in the point by restoring the previous table data view.

embim3214.png - Destroy the point link (the recent increments are cleared in the table)

The table data are cleared, the increment of the last selected point isn't displayed.

embim3215.png - Change the sign of the entered increment in Х or У column.

embim3216.png - Save the increment in the inner buffer of the table; embim3217.png - Take the values from the buffer table to copy the increments from point to point.

embim3218.png - Paste into the column Х or У the increment values, saved in the buffer of embim3219.png "Seams algebra" and "Calculator". These data are used in the 2nd grading mode only (by size).

For example, to grade the pieces by the Measurements sheet, enter the actual Sheet data in the "Calculator" tab embim3220.png "G", in the other tab "Н" calculate the increment, using the function f6, and save the data in the buffer embim3221.png. The table command embim3222.png enters these data in the required column (Х, У).

embim3223.png

Performing grading

     To grade by input increments select the commandembim3224.png.

The point will get increment by the grading modes in the table, the grading by the current feature (grading by size, length or fullness) will be displayed.

During grade piece grading embim3225.png only grade grading is displayed, during drop grading embim3226.png only drop grading is displayed, the same refers to spec grading.


ADDITIONAL MODE

 

To display full grading use the command embim3228.png,

                                                           holding the <CTRL> key.

Switch to work with other piece points

By indicating other points and point groups of the piece, all the required increment values are entered by the grading schemes.

Transfer to a different increment feature: length, fullness

     For models of the length scale move to   grading by size mode, by turning on the button embim3229.png and repeat the whole grading cycle.

     Then, for models of the fullness scale, move to grading by fullness, by turning on the button embim3230.png, and repeat the whole grading cycle.

Close the increment table

     Having finished the increments input, close the table by clicking the button embim3231.png on the upper panel of the table. You can also click the table launch button repeatedly embim3232.png in the screen button menu or go to steps of the text menu "Window/ Display (Hide) increment table".

Save graded piece

To save the piece in the base, select the button embim3233.png in the screen button menu or go to steps of the text menu "Window/ Save the screen contents in the base".

Grading order in different grading modes

1) To grade in the 1st grading mode do the following:

  • Launch the Increment table. The operating modes in the inner coordinate system are turned on automaticallyembim3234.png, the  grading by size is set. embim3235.png
  • Turn on the 1st grading mode by clicking the button embim3236.png
  • .Select interdimensional or total increments by clicking the button embim3237.png or. embim3238.png
  • If needed, create point groups by selecting the set group function. embim3239.png
  • Indicate grading point in the piece.
  • Fill in the table: input the increment values in the lower input windows, move the values in the left (X) or right (Y) size column by clicking the button. embim3240.png 
  • Perform the grading in the point by clicking the button embim3241.png
  • Continue increment input by sizes, indicating other points of the piece.

Set the grading by length embim3242.png (if available), then fullness grading embim3243.png (if available) and repeat the process, having selected the grading mode and having created new point groups. Save the graded piece in the base by clicking the button embim3244.png of the screen button menu.

2) To grade in the 2nd grading mode do the following:

  • Launch the Increment table. The operating modes in the inner coordinate system are turned on automatically embim3245.png, the size grading is set. embim3246.png

      Grading in the 2nd mode embim3247.png is also automatically set during table launch.

  • If needed, create point groups by selecting the set group function. embim3248.png
  • Indicate grading point in the piece.
  • Fill in the table: input the increment values in the left (X) and right (Y) size columns
  • Perform the grading in the point by clicking the button embim3249.png
  • Continue increment input by sizes, indicating other points of the piece.
  • Set the length grading embim3250.png (if available), then spec grading embim3251.png (if available) and repeat the process, having selected the grading mode and having created new point groups.
  • Save the graded piece in the base by clicking the button embim3252.png of the screen button menu.

 

3) To grade in the 3rd grading mode do the following:

  • Launch the Increment table. The operating modes in the inner coordinate system are turned on automatically embim3253.png, the by size grading is set. embim3254.png
  • Turn on the 3rd grading mode by clicking the button embim3255.png
  • Set the ranges of sizes for grading by clicking the buttons of the extreme range sizes (except the first size).
  • .Select interdimensional or total increments by clicking the button embim3256.png or. embim3257.png
  • If needed, create point groups by selecting the set group function. embim3258.png
  • Indicate grading point in the piece.
  • Fill in the table: input the increment values manually or enter them in the lower input windows, move the values to the left (Х) and right (У) columns by clicking embim3259.png.
  • Perform the grading in the point by clicking the button embim3260.png
  • Continue increment input by sizes, indicating other points of the piece.
  • Set the by length grading embim3261.png (if available), then by fullness grading embim3262.png (if available) and repeat the process, having selected the grading mode and having created new point groups.

Save the graded piece in the base by clicking the button embim3263.png of the screen button menu.

Special Modes of the Increment Table

Special Functions

Increment copying

To copy increments from one point to another (or a few points) do the following:

  • Indicate a piece point (1) with an increment, which needs to be copied.
  • Select copying increments function in the table:

embim3264.png - Copy full increment value.

embim3265.png - Copy increment value by coordinate Х only.

embim3266.png - Copy increment value by coordinate Y only. The cursor will change like this embim3267.png, embim3268.png or embim3269.png.

  • Indicate one or a few points (2a, 2b, 2c, 2d), where the increment should be transfered.
embim3270.png

     The operation of increment copying allows to create the so-called "Increment reference book".

A special range of models with checked piece gradation of varied assortment can be created.     During new pieces grading the increments can be copied in the required points from the referenced" pieces, by displaying them on the Working model screen from the Active "referenced" model (with the function embim3271.png of the "Work with base" window)

Increment zeroing

To zero the increments of the previously graded pieces do the following:

  • Select one of the zeroing commands in the table:

embim3272.png - Increment zeroing in the point by all size features: grading by size, height or fullness


embim3273.png - Increment zeroing modes for a current measurement. embim3274.png —size, embim3275.png —height, embim3276.png —fullness.

          The program cursor will look like this embim3277.png or embim3278.png.

  • Indicate a point (or a few points) to zero the increments.

Then the lines of all the sizes will be limited to a point for full grading or for grade, drop or spec grading only. The point zeroing commands refer to particular points only, not groups.

     If needed, after zeroing the increments, the embim3279.png "Segment/ Regrade" function helps to align the figured piece segments in different areas to fit the base piece form.

embim3280.png embim3281.png

embim3282.png
ADDITIONAL MODE

 

During the embim3284.png and embim3285.png commands execution, if the

<CTRL> key is hold on the keyboard, zeroing of all the piece points is performed for all features or for a current size. The sizes aren't deleted from the pieces, but repeat the form of the base grade, length or volume piece.

With the help of the function embim3286.png"Delete sizes" in the "Work with the base" window, all the grading sizes, except for the base one, can be deleted. Then all the increment values will also be zeroed.

Regrading of the point increment

To evenly distribute the increment between two sizes or across the whole grading, do the following:

  • Select one of the point increment regrading commands in the table:

embim3287.png - Increment regrading between two selected sizes. The cursor will change like this embim3288.png embim3289.png  - Increment regrading for full grading. The cursor will change like this embim3290.png

  • Indicate a point (1) in the first calculable size.
  • Indicate the same point (2) in another size.

The total increment between the selected sizes is evenly divided by the number of intermediate sizes. The calculated increment value will be set either inside the range between the indicated sizes embim3291.png or across all the sizes embim3292.png.

The point regrading commands refer to particular points only, not groups.


 embim3293.png
         embim3294.png

Increment in a given direction

It's possible to input increments not only for the coordinates XY, but also for the extension of the segment in the program. This grading method is used, for example, for frill items, figured belts, different slanted cuts: in flared skirts (bell-shaped, circular skirts), for raglan sleeve cuts etc.

To enter the increment, calculated along the direction of the selected line, do the following:

  • Select a point (1) for grading.
  • Select a command embim3295.png in the increment table. The cursor will change like this embim3296.png.
  • Indicate the piece segment near the end point (1a).

       Then the input window will be displayed on the screen for entering the increment value:

embim3297.png

The value sign defines the grading direction: if the segment lengthens by size, the increment value will be positive, if it shortens, it will be negative.

Different values can be input manually by size (button embim3298.png) or from the buffer (button embim3299.png).  Press the YES button to confirm the data input.

The input window will close, the input increment value in the Increment table will be automatically divided into 2 coordinates: X (left column) and Y (right column).

Select the command embim3300.png in the table to perform the grading.

The point increment moves along the line, selected on the screen (tangentially in the end point).

embim3301.png
SPECIAL FEATURES

To preserve the form of the grading segment a Control point (2) can be pasted near the grading point with the function embim3303.png"Point/ Paste randomly". This point will let you to avoid regrading the whole segment automatically, but to preserve its form.

embim3304.png

This random point in all sizes should the positioned at the distance, that won't prevent grading (more than the total increment value).

Increment, calculated by two adjacent points

The function allows setting the point increment, calculated proportionally between two increments of two selected segment points. Do the following:

  • Select a button embim3305.png in the increment table. The cursor will change like thisembim3306.png.

Select the first point (1) of the segment.

Select the second point (2) of the segment. Select the point (3) of the given segment, where a calculated increment should be applied.

embim3307.png

     Then this point will get an increment, regarding to the increments of the two given points, the proportional correlation of the position in the segment is taken into account.

For example, if the point (3) divides the segment in halves (between the points 1 and 2), it'll get the increment, calculated as a sum of two increments in the given points, divided into halves.

     In fact, the same principle applies, if the point like Intermediate is set, but the designer can indicate any two points of the segment (just not the end points), the position of the point won't be influenced by the increment in two other points of the given segment.

     The increment isn't set for these end points of the segment in this function (like for the Functional points).

Piece Grading in Screen Coordinates

Besides grading in the inner coordinate system embim3308.png, when the increment values are applied by the piece position in the base, the pieces can be graded in screen coordinates: by the position of the rotated screen axes or the piece, rotated on the screen.

To grade the pieces in screen coordinates the embim3309.png mode should be turned on, before selecting other grading modes (grading feature, grading type etc.).

For the means of distinction, the Grading table background will turn yellow for screen coordinates. All the other stages of grading are similar to the ones, described for work in the inner coordinates system.

embim3310.png

With the creation of the screen piece groups commands (functions of the screen menuembim3311.png or the text menu points "Window/ Align pieces…") the pieces can be combined on the screen to set the necessary rotation angle for grading.

The screen axes commands (functions of the lower panel embim3312.png or the text menu points "Window/ Coordinate axes…") can help to set the axis along the line for point grading in the set direction.


Grading of a piece, rotated on the screen

To grade the raglan sleeve the piece increment of the standard construction with the set-in sleeve can be used. For example, to grade the shoulder point of the back part of the sleeve, do the following:

  • Align the segments of the body armhole on the screen in two points embim3313.png (in the neck and armhole), so that the screen inclination of the shoulder segment was similar to the inclination of the shoulder cut of the standard construction.
  • Open the Increment table and turn on the operating mode for screen coordinates. embim3314.png

      The background of the table cells will turn yellow.

  • Select the necessary grading modes: Grading feature — grade embim3315.png.

      Grading mode — even, with interdimensional value input (1st mode embim3316.png , embim3317.png)

  • Select the shoulder point of the sleeve for grading and enter the increment value in the table, typical of the pieces of standard construction (with set-in sleeve).
  •  Perform the grading in the point. embim3318.png
embim3319.png

By destroying the piece group (button embim3320.png in the screen menu), you can reset the initial status of the piece on the screen (button embim3321.png in the screen menu) and select the embim3322.png inner coordinates system mode in the Increment table. The calculation of the input increment is performed automatically.

        embim3323.png

Grading in rotated coordinate axes

If the value of one of the coordinates (X or Y) is unknown for increment input, the rotation of the screen coordinates zeroes one of them, in order to grade by one coordinate, along the line.

For example, to grade the lower cut of the whole-cut sleeve of the front along the line, do the following: Display the coordinate axes on the screen embim3324.png and position the coordinate’s center in the lower point of the sleeve.

Select the function of axes rotation embim3325.png and indicate the Х axis, holding the mouse button, move the cursor to the grading point, which is the upper point of the bottom cut of the sleeve. Release the mouse button.

      The axes rotation along the bottom segment of the sleeve is set, the Y coordinate equals zero.

 You can grade along the bottom line just by entering the increment by the X axis only.

      Do the following: Open the Increment table and turn on the operating mode for screen coordinates. embim3326.png

      The background of the table cells will turn yellow. Select the necessary grading modes: Grading feature — sizingembim3327.png.

      Grading mode — even, with interdimensional value input (1st mode embim3328.png ,embim3329.png) Select a grading point and enter the increment value by the X coordinate. Perform the grading in the point. embim3330.png

embim3331.png

       The increment is set, directed along the bottom line of the sleeve cut.

After finishing the work with the rotated axes, restore their standard position embim3332.png, otherwise all the operations, connected with Х, У coordinates, will be performed with regard to the given axes rotation.

When the embim3333.png inner coordinates system in the table is restored, the increment is automatically recalculated.

ADDITIONAL MODE In the operating commands for axes coordinates the axes can be set

tangentially to the curved segment by the command

"Set the begining of coordinates", holding the <CTRL> key.

embim3335.png

After the area NEAR the end point is clicked, the axis will be set in this End point, and rotated tangentially to the specified segment.  In this way increments can be set not only along the straight segment, but along the curved as well.


SPECIAL FEATURES

 

 

The point groups embim3337.png aren't created in the screen coordinate axes embim3338.png.

After the initial position of the rotated screen pieces is restored, they will preserve the groups and gradation values, which have been corrected for their screen grading, but might be incorrect for the position, in which the pieces are kept in the base.

Grading pieces by measurement properties

Grading by measurement properties embim3339.png - is an additional, 4 grading mode, where instead of number increment values symbols of measurement properties of a figure are used (Hgc – half girth of chest, Sw – Shoulder width, etc.). Values of these measurement properties are set in the tables of the program «Size database» embim3340.png. When one of the tables is selected (for example, INDUSTRY STANDARD of typical figures) list of measurement properties, which can be input as formulas to grade a corresponding construction point of a piece, is displayed. Increment value in a point will be calculated automatically, based on grading of measurement properties in the table «Size database», by their inter-size, inter-height and inter-corpulence increments. For example, half girth of chest(Hgc) has difference of 2 cm by sizes. If this measurement property is used for grading, a increment of 2 cm will be input in the point.

embim3341.png

Grading order by measurement data

· Open the increment table, and select the current grading property embim3342.png - by sizes · Select in the table grading mode by measurement data, by pressing the button embim3343.png

· Select the table of measurement data from the program «Size database», by pressing the button embim3344.png

A list, where one of the tables must be selected is displayed on the screen: specify a required line and press the YES button. Name of a given size database is displayed on the top panel of the Increment table.

embim3345.png

· Specify on a piece a point for grading · Select in the list of measurement properties suitable data for grading in the tabs «Measurement data», «Increase», «Variables», using the switch «Data»

embim3346.png

· By clicking select in the tab list a required size property and input in the grading cell along Х (left) or along У (right), with the help of a corresponding button embim3347.png - left or right. Required name moves to the grading cell:

embim3348.png

If necessary, it is possible to use not only separate elements of the size database data, but compose expressions with them. For example , «Сh/[2]» ATTENTION! Nonlinear values (coefficients, parts) must be included in square brackets · To perform the function of grading a point, select the button embim3349.png in the table · To view number values of increments, switch to the 2 grading modeembim3350.png , where input of increments in a point is done size by size.

embim3351.png

Specifics of grading by measurement data

If upon selection of the table «Size database» range and composition of size properties of the working model and of the size database do not match, a warning is displayed on the screen:

embim3352.png

A mandatory condition for transferring data: size properties must match, and the range of sizes of a working mode can be less or equal to the range in the size database. Besides, it is not possible to use size databases, if a table of measurement properties contains blank cells. There is an option to input data by using the function «in direction by…» embim3353.png - for example, to input increment of a size data Sw (shoulder width) along the shoulder line. Cells of data input will be automatically filled in with coefficients, with allowance of the slope angle of a specified line. Input value will be divided into two components: Х and У. To input data, input one value in both cells after using the multiplication sign(*):

embim3354.png

1) Grading must be performed by sizes and heights, as well as by corpulence data precisely in accordance with the type and direction of grading of the measurement property itself. In other words, if a measurement property can be graded by sizes, by heights, horizontally, and vertically, it needs to be input in the increment table in the mode «by sizes», then «by heights», and input data in the cell Х or У – according to the assortment (position) of pieces.

2) ATTENTION! Input of increments in a point must be done considering previously input data in the adjacent points. In other words, consider the REFERENCE point of the increments, and «grow» formulas gradually, adding to the existing sizes the following, new data. Example: Grading a neck point vertically (coordinate Y) equal to measurements «Nape to waist» «NW». Then vertical grading of the point of the neck top in the back, equal to 1/3 of neck lsize «[0.3]*NS», must be performed taking into account the first move. As a result, we have an expression: «NW+ [0.3]*NS» Expression for filling in the Y axis cell is composed the same way:

embim3355.png

3) If an expression, valid only for some sizes, must be input, it is possible to use the table «Size database» to input graded values–coefficients. For example: for sizes 44-52 an expression 0,5*TA must be input for 54-60 – expression 0,5* (1,25*TA) for 62-68 – expression 0,5*(1,75*TA) Coefficient (К1) must be input in the tab «Variables» of a given size database. Recalculation from 1,25 to 1250 will be performed, so it is necessary to input an expression «К1/1», and fill in the table as a table of linear values (1,25, 1,75,…).

4) When a model is opened again in the working window of the program, or when performing actions of copying models («Object/ Save as»), set size database and expressions with size properties will be saved. ATTENTION! It is important to remember the danger of a repeat grading by these formulas, if after grading a point, increment required correction (by data of the buffer of «Seam algebra», etc.).

5) unctions of transferring increments from a point to a point embim3356.png will be blocked.

6) If «Rollback» was performed after inputting a formula and grading, graded nest will be restored to its initial view, but the formula will not be automatically canceled in a given point. It needs to be changed, or input increments in a point using a different mode (for example, size by size). In other words, if the function. «Grade» embim3357.png is not performed specifically for this point, grading by formula will not be performed.

7) Piece copies will not save a set of input expressions with measurement data.

8) This grading mode can be used for Children's assortment, or to grade by Measurement table, sent by a client-firm. The program «Size database» has an option to input such a table by following menu points «Data/ File import*.xls».

9) The function of opening a table from file (embim3358.png) is performed only for the format ОХР. But if «company» Measurement table, set as a table in Excel format (extension .xls), is opened from file in the program «Size database» and is saved, it will be transformed into the format ОХР and can be used in the Increment table.

Specifics of Work with the Increment Table

1.      During the work with the Increment table the missing length sizes are built automatically. For example, if length and fullness grading hasn't been performed (if applicable for a model), than during by size grading full grading is performed (drop and spec) with zero increments. 2.      If the piece is missing some sizes, after the data are entered for the first point, the missing size is built automatically (it's graded by the nearest smallest increment in each point). The row of the missing size is zeroed in the Increment table.

embim3359.png

3.      During operation in a small scale, if the points are situated VERY close, if 2 points are highlighted at once, the entered increment will be valid for both points!   It's recommended to work in normal scale, when every point is defined. 4.      The Increment table isn't opened in the "Grading control" (F6) mode.