Difference between revisions of "Constructor:Modeling functions"
(→Cut off a piece) |
(→Widen a piece) |
||
| Line 48: | Line 48: | ||
== Widen a piece == | == Widen a piece == | ||
| + | |||
| + | To widen a piece (for example, to form folds and tucks): | ||
| + | · Select the tab MODELING and the button [[Image:embim1437.png|embim1437.png]] in this tab. The cursor view changes to [[Image:embim1438.png|embim1438.png]] . | ||
| + | It is also possible to follow text menu points «Piece/Model/ Widen piece». | ||
| + | · Specify cut line ('''1''') | ||
| + | · Specify a part of a piece to be moved ('''2'''). The window with widening parameters is displayed on the screen: | ||
| + | |||
| + | [[Image:embim1439.png|embim1439.png]] | ||
| + | |||
| + | Set widening value in the window «Widen by» and select a type of widening: [[Image:embim1440.png|embim1440.png]] - widening will take place at normal to chord (in other words – to the straight line, which connects final points of the cut line). | ||
| + | |||
| + | [[Image:embim1441.png|embim1441.png]] | ||
| + | |||
| + | [[Image:embim1442.png|embim1442.png]] - Widening in the coordinate system ХУ, on rotated axis [[Image:embim1443.png|embim1443.png]] as well. Additional windows for entering X and Y values are displayed in the window with widening parameters: | ||
| + | |||
| + | [[Image:embim1444.png|embim1444.png]] | ||
| + | |||
| + | [[Image:embim1445.png|embim1445.png]] | ||
| + | |||
| + | When widening in the mode «At normal to chord», a specified side ('''2''') determines positive direction for moving the selected part of a piece. ('''2а''' – moving a part to the right, '''2б''' – to the left) | ||
| + | |||
| + | [[Image:embim1446.png|embim1446.png]] | ||
| + | |||
| + | · Press the YES button to confirm data input, press CANCEL to cancel. | ||
| + | Additional mode (working without a cut line) is the same as described for the function [[Image:embim1447.png|embim1447.png]] «Cut a piece» | ||
| + | |||
| + | [[Image:embim1448.png|embim1448.png]] | ||
| + | |||
| + | 1) When working with superposed pieces, upon specifying a side to be widened, a piece that was fixed upon superposition must be selected. | ||
| + | |||
| + | 2) Functions of the tab SEAMS [[Image:embim1449.png|embim1449.png]] «Designing a dart» (for Cut contour) and [[Image:embim1450.png|embim1450.png]] «Set dart point» (for the main contour) can be used to design ends of the widened section. | ||
| + | |||
| + | [[Image:embim1451.png|embim1451.png]] | ||
| + | |||
| + | Other specifics are the same as described for the function [[Image:embim1452.png|embim1452.png]] «Cut a piece» | ||
| + | |||
== Conic spread == | == Conic spread == | ||
== Widen and spread a piece (folds) == | == Widen and spread a piece (folds) == | ||
Revision as of 22:59, 3 March 2015
Contents
Cut a piece into two parts
To cut a piece into two parts:
• Select the MODELING tab and the button
in this tab. The cursor view is changed to
You can also follow the text menu points “Piece/ Model/ Cut a piece”.
• Specify the cut line of the piece(1)
• Specify one of the piece sections (2). The window with cutting parameters is displayed on the screen:
• If necessary, set seam allowances for the section to be cut: “Seam allowance 1” for the section (2) selected while performing the function. “Seam allowance 2” for the second section. • Press the YES button to confirm input of the data, press the CANCEL button to cancel it.
The working piece will remain unchanged, and 2 new untitled pieces will be created on the screen. If the reference piece was rotated with one of the functions for screen rotation, new pieces will be displayed on the screen according to placement of the working piece in the database.
It is possible to perform the command without an evident Cut line, but along a straight line set with two points.
To do so, press the <CTRL> key on the keyboard after selection of the function and specify two points on the main contour, imitating a cut line. Then proceed the function as in the mode with a drafted cut line (specify one of the piece parts (2)).
1) With the help of the functions of the SEAMS tab
“Indention”, “Corner”, “Fox ear” you can design cut sections on the pieces with seam allowances.
2) For superposed pieces, the function works on the extension of the cut line, if this line does not reach the piece border. For free pieces, the function works exactly along the cut line
Cut off a piece
To cut off a part of a piece:
· Select the tab MODELING and the button
in the tab. The cursor view changes to
. It is also possible to follow text menu points «Piece/ Model/ Cut a piece».
· Specify a line for cutting a piece (1)
· Specify the remaining part of a piece (2). One specified part of a piece remains on the screen.
Additional mode is same as described for the function
«Cut a piece»
When selecting the remaining part of a piece, it is best not to select a section, from which the cut line runs, but choose a section adjacent to it instead. If a cut line does not run from a final point, it is possible that separate parts of a piece in the graded nest will be clicked .
ATTENTION! This method of selecting the working section (remaining, rotated, moved) works for other modeling functions as well.
Other specifics are the same as described for the function
«Cut a piece into 2 parts»
Widen a piece
To widen a piece (for example, to form folds and tucks):
· Select the tab MODELING and the button
in this tab. The cursor view changes to
.
It is also possible to follow text menu points «Piece/Model/ Widen piece».
· Specify cut line (1) · Specify a part of a piece to be moved (2). The window with widening parameters is displayed on the screen:
Set widening value in the window «Widen by» and select a type of widening:
- widening will take place at normal to chord (in other words – to the straight line, which connects final points of the cut line).
- Widening in the coordinate system ХУ, on rotated axis
as well. Additional windows for entering X and Y values are displayed in the window with widening parameters:
When widening in the mode «At normal to chord», a specified side (2) determines positive direction for moving the selected part of a piece. (2а – moving a part to the right, 2б – to the left)
· Press the YES button to confirm data input, press CANCEL to cancel. Additional mode (working without a cut line) is the same as described for the function embim1447.png «Cut a piece»
1) When working with superposed pieces, upon specifying a side to be widened, a piece that was fixed upon superposition must be selected.
2) Functions of the tab SEAMS
«Designing a dart» (for Cut contour) and
«Set dart point» (for the main contour) can be used to design ends of the widened section.
Other specifics are the same as described for the function embim1452.png «Cut a piece»












